• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/65

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

65 Cards in this Set

  • Front
  • Back
What is a push or pull
force
What is mass times acceleration
force
mass is the total amount of
matter
weight is th measure of
gravity
Torque is the force like quantity in
rotational mechnical systems
Torque is measured in
Nm(SI) ft/lb(english)
when force acts in the same direct, the________ is the sum of two forces.
net force
The prime mover are
pressure difference
Density is found by dividing _______, and _________
mass, volume
A hydrometer is used to measure
density
Pressure is found by dividing a unit of _____ by a unit of ____.
force, area
What is used to measure pressure difference.
manometer
there are two types of fluids
hydraulic and pnuematic
gases are___________ and liquids are not
compressible
Pressure increases with depth in a fluid bt is independent of
volume
what is absolute pressure measured with
in a refference to a vaccum
Weight density is the ratio of an objects wieght to its
volume
Volatge comes in
two forms
Dccurrent and accurrent are
two forms of voltage
voltmeters measure
voltage difference
multimeters measure
voltage
the positive or electrode in a battery is the
anode
the negative or electrode is the
cathode
Electrical circuits contain a source
battery or ac power
Temp. difference acts as a prime mover in
thermal systems
heat always moves from _____ regions to ______ regions
warm to cold
heat is a form of
energy
temp. is the measure of the average
energy of motion
themocouples use three wires of
two different metals
work is ___ times _____
force, distance
output work is the work done by the
system
input work is the work going into the
system
efficiency is ______work divided by _____work multiplied by 100%
output and input
Spring scales are used to measure
input and output force
In ______________ work is equal to torque times the angle through which the lever arms moves
rotational mechanical systems
one radian is equal to
57.3 degrees
linear mechanical work is performed when mass is moved in a______ line
straight
angular mechanical work is performed when a mass is moved around an ____ or _
axis or rotation
mechanical work causes an object to start moving stop and to
change direction
fluid work is equal to the pressure diffrence times the
volume moved
in a closed fluid system the fluid is
reused
there is no such thing as a
linear or angular fluid work
cross sectional area is found by
multiplying 0.7854 by the diameter squared
electrical work is
volume times charge
a coulomb is a quantity of charge equal to 6.25 times
10 to the power of 18 electrons
electrical charge can be calculated by multiplying
amps by time
basic unit of electrical charge is
the joule
a rate is a
displacement divided ny elapsed time
velocity is the measure of
linear mechanical work
velocity is a
vector
speed is similar to
velocity
angular rate is expressed in
radians
a stroboscope is used to measure
angular rate
there are _______ radians i one rev.
6.28
acceleration is the rate at which speed
decreases and increases
in fluid systems flow rate is the _____ of moved fluid in a given period of time
volume
viscosity is the quality of a substance related to its
thickness
electrical rate is the amount of _____ moved
charge
electrical current flow is symbolized by an
i
one milliampere is equal to
1/1000 amps
one microampere is equal to
1 * 10^-6 amps
an ammeter is used to meausre
current
hertz is a measure of
frequency in alternating current
an oscilloscope can measure
frequency as well as voltage waveform
heat flow rate is symbolized as
Qh