• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/20

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

20 Cards in this Set

  • Front
  • Back
a quanity that is fully specified by measuring its size is called a
scalar
a resultana force has both magnitude and
direction
the si units of mechanical force are
newtons or kilogram weight
an si unit of pressure is
Nm
the cross sectional area of a cylinder can be found by
multiplying 0.7854 x d squared
in the english system of units, ft/sec squared indicates a unit for
measuring acceleration
a vector must have
magnitude and direction
when gases are compressed, storage tanks should be located as close to the point of use as possible because
the flow rate is inversly proportional to the distance traveled
on miulliampere of electric current equals
0.001 amperes
a calorie is a unit of
heat energy
a way to increase resistance in a pipe is to
lengthen the pipe
a way to decreacse resistance in a pipe is to
heat the fluid
copper wire and solder are each classified as
conductors
500 milliamperes equals
1/2 ampere
the freqyency of a voltage can be mreasured with an
oscilloscope
a letter definition or ewquation for a linear speed is
v=l/t
a negative sign in front on an acceleration would indicate the object is
decelerating
which of the following is associated with linear rate?
buckshot fired from a gun
production rate is the
number of items produced per unit of time
the term rpm refers to
revolutions per minuate