Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
107 Cards in this Set
- Front
- Back
As a general rule, on multi-core systems you should allocate ____ less than total available processors to host processing.
|
One
|
|
ProTools HD hardware systems allow __________ voices at 44.1 or 48 kHz.
|
16 to 192
|
|
The Disk Playback Cache size allows you to determine what?
|
How much RAM is being used to buffer audio to your hard drive
|
|
ProTools HD systems have how many TDM time slots available at 44.1 and 48 kHz?
|
512
|
|
ProTools HD systems have how many TDM time slots available at 96 kHz?
|
256
|
|
ProTools HD systems have how many TDM time slots available at 192 kHz?
|
120
|
|
What parameters can you configure from the main page of the Hardware Setup dialog box?
|
External wordclock
|
|
What impact does the H/W Buffer Size setting have on ProTools HD system performance?
|
It affects MIDI/instrument tracks more than it does audio.
|
|
What impact do the Host Processors and CPU Usage Limit settings have on ProTools system performance?
|
It affects RTAS processing
|
|
What system parameters can be monitored from the System Usage Window?
|
CPU usage (Native/Clip), timeslots, DSP
|
|
What tabs (pages) are available in the I/O Setup window?
|
In, out, bus, inserts
|
|
What modifier key must be used to import all of the pages of an I/O Setup file?
|
Option
|
|
What is the maximum number of simultaneous voiced tracks supported on a ProTools HD Native System?
|
192
|
|
How does ProTools determine voice priority for tracks?
|
The top track (in the Edit window) or the left track (in the Track list) takes priority.
|
|
Describe some ways to free up a voice on a track.
|
Making a track inactive, muting on "Mute Frees Assigned Voice," unassign output and any sends
|
|
Describe three ways to deactivate a track.
|
Of these: Right clicking (in mix & edit windows and track list), CTRL+CMD+Click, click and hold the track icon in the mix window
|
|
What window allows you to specify which tracks to record to each drive? Must all tracks in a session record to the same drive?
|
A. Setup > Disk Allocation
B. No |
|
How many Scroll Options are available on an HD system? What are they?
|
1) None
2) After Playback 3) Page 4) Continous 5) Center Playhead |
|
What scrolling option disregards the Timeline Insertion Follows Playback setting?
|
Center Playhead
|
|
How can you quickly scroll any track to the top of the Edit window in one step?
|
CTRL+SHIFT+Click
|
|
What are some of the color coding options available through the Color Palette?
|
Tracks, regions, markers, groups, regions in regions list
|
|
What types of browsers are included with DigiBase?
|
Project, Workspace, Volume, Catalog
|
|
Which browser quickly shows a consolidated view of all the files currently used in the session, even if they reside in different locations or span multiple drives?
|
Project
|
|
Which column in the Workspace browser shows whether an audio file has been analyzed for Elastic Audio? What icon is used to denote that the file has been analyzed?
|
Status column; check mark
|
|
What condition would case the Timeline Data Online Indicator to turn red?
|
Something in the timeline cannot be played
|
|
What key commands are available for selecting options in the Missing Files Dialog box?
|
CMD+S (Skip All), CMD+M (Manually Find & Relink), CMD+A (Automatically Find & Relink)
|
|
When is the Find All Candidates method for relinking more useful? When is the Find Links method for relinking preferred?
|
Just searching for one file- Find All Candidates. Searching for multiple files- Find Links.
|
|
What are some of the options available in the Duplicate Tracks dialog box?
|
Active playlist, alternate playlist. automation, inserts, sends, group assignments
|
|
How would you go about splitting off certain tracks in a session for a collaborator to work on while you continue to work on the main session?
|
Export Selected Tracks as New Session
|
|
T/F: You can use minus operations when working with edit selections and set for Bars/Beats.
|
False
|
|
How do you nudge an entire edit selection?
|
SHIFT+ plus or minus key on numeric keypad
|
|
How do you nudge the start time of a selection?
|
Option+SHIFT+plus or minus key on numeric keypad
|
|
How do you nudge the end time of a selection?
|
CMD+SHIFT+plus or minus key on numeric keypad
|
|
T/F: Pre and post roll need to be active for auditioning the start and end points of a selection.
|
False
|
|
The modifier key to audition up to (pre-roll) is:
|
Option
|
|
The modifier key to audition from (post-roll) is:
|
Command
|
|
The modifier key to go to the selection start is:
|
Left arrow
|
|
The modifier key to go to the selection end is:
|
Right arrow
|
|
To pre-roll audition up to a selection start point:
|
Option+Left arrow
|
|
To pre-roll audition up to a selection end point:
|
Option+Right arrow
|
|
To post-roll audition after a selection start point:
|
Command+Left arrow
|
|
To post-roll audition after a selection end point:
|
Command+Right arrow
|
|
To pre- and post-roll audition on either side of a selection start point:
|
Option+Command+Left arrow
|
|
To pre- and post-roll audition on either side of a selection end point:
|
Option+Command+Right arrow
|
|
What 7 general properties can be stored in a memory location?
|
1) Customized memory location name
2)Zoom settings 3)Pre/post roll times 4)Track show/hide settings 5)Track height settings 6)Group enables 7)Comments |
|
What modifier key would you hold to add an existing selection to another track by clicking on the track?
|
Shift
|
|
How can you quickly select everything to the left of the cursor?
|
Shift+Enter
|
|
How can you quickly select everything to the right of the cursor?
|
Option+Enter
|
|
How is the Nudge function affected by different edit modes?
|
It isn't
|
|
What keys do you press to nudge an Edit selection?
|
Shift+ plus or minus key
|
|
How can you nudge just the start or end of an Edit selection?
|
Option+Shift+plus or minus (start); CMD+Shift+plus or minus (end)
|
|
What is the modifier to change the Scrubber tool function from scrubbing to shuttle mode?
|
Option
|
|
How can you control the playback speed and direction while shuttling?
|
By moving the mouse left and right
|
|
How would you audition the beginning of a selection by the amount of post-roll?
|
CMD+Left arrow
|
|
Does Pre/Post-Roll need to be active for the audition feature to work?
|
No
|
|
What setting determines the audition length?
|
Pre/Post-Roll Settings
|
|
What are the steps involved in storing a selection as a memory location?
|
1) Make a selection
2) Create new memory location 3) Select "selection" in the memory location menu 4) Save |
|
What is the keyboard shorcut for recalling a memory location?
|
Period, memory location number, period
|
|
What is the keyboard shortcut for editing a memory location?
|
CTRL+Click
|
|
What is the key command to toggle the Scrub Trim tool?
|
F6
|
|
What is the key command to align the start of a region?
|
Ctrl+Click
|
|
What is the key command to align the end of a region?
|
Ctrl+Cmd
|
|
What is the key command to align to the region sync point?
|
Ctrl+Shift
|
|
What is the key command to zoom out?
|
R
|
|
What is the key command to zoom in?
|
T
|
|
When Commands Keyboard Focus is enabled, what is the key command to separate a region at the insertion point or edit selection?
|
B
|
|
When Commands Keyboard Focus is enabled, What is the key command to trim the start of a region to the insertion point?
|
A
|
|
When Commands Keyboard Focus is enabled, What is the key command to trim the end of a region from the insertion point?
|
S
|
|
What modifier key would you hold while using the Scrub Trim tool to scrub with finer resolution?
|
CMD
|
|
Which Grabber tool mode allows you to select non-contiguous clips on one or more tracks?
|
Object grabber
|
|
What are the functions available with the Smart Tool?
|
Trimmer, selector, grabber, fades
|
|
How canyou access the Selector with the Smart Tool active?
|
Move your cursor over the top half of a region
|
|
How can you access the Grabber with the Smart Tool active?
|
Move your cursor over the bottom half of a region
|
|
How can you create fades with the Smart Tool?
|
Move your cursor over the corners of a region
|
|
How can you customie the type of fade curves that are used with the Smart Tool?
|
Setup>Preferences>Editing
|
|
How can the Strip Silence command be used?
|
It takes out portions of regions below a certain threshold
|
|
What is the difference between the Strip and Extract functions?
|
Strip takes out points that are below a certain threshold, extrack takes out points that are above a certain threshold (i.e. for room noise)
|
|
What is the quickest way to align the front (head) of two clips to each other?
|
CTRL+Click
|
|
How could you go about aligining the end (tail) of two clips?
|
CTRL+CMD
|
|
What is the keyboard shortcut for aligning a clip's sync point to the Edit cursor?
|
CTRL+Shift
|
|
What is the purpose of Commands Keyboard Focus mode?
|
Allows you to use just one key to edit
|
|
What are two ways to enable Commands Keyboard Focus mode?
|
1) Click the A-Z button in the Edit window
2)OPT+CMD+1 |
|
What are the commands Focus Keys for creating fades?
|
D,F,G
|
|
How can you trim a clip's start or end point by the nudge value?
|
Option+ plus or minus or CMD+ plus or minus
|
|
What nudge functions are available with Commands Keyboard Focus mode enabled?
|
You can use comma and period to nudge instead of plus and minus, and M+/ nudges to the next higher value
|
|
How would you nudge the contents of a clip without affecting the clip boundaries?
|
CTRL
|
|
What are the modifier keys to change all track views to automation?
|
CTRL+OPT+CMD+click on volume or pan in the track view
|
|
What is the key command to open the automation window?
|
CMD+4 on numeric keypad
|
|
What are the modifier keys to change one track view to automation?
|
CTRL+CMD+ click on volume or pan in the track view
|
|
How do you force auto match in an automation mode that isn't auto touch?
|
CMD+Click on the automation mode on the track
|
|
How do you force just one lane to resize?
|
CTRL
|
|
What are the modifier keys to enable individual control with plug-in automation?
|
CTRL+OPT+CMD+Click on "Auto Enable" in the plug-in window
|
|
How can you move a selection down or up with modifier keys?
|
; (for down) or p (for up) with A-Z enabled in the Edit window
|
|
What is "Automation Follows Edit"?
|
When enabled, copy/pasting audio will also copy/paste automation on a region.
|
|
What is the difference between Auto Touch and Auto Latch?
|
Touch writes as long as a fader is touched, when you let go it will auto match automatically. Latch will keep writing until you stop playback or force auto match.
|
|
When would you use Auto Trim as opposed to Standard?
|
When you want to add or subtract to existing automation instead of replacing it
|
|
What are the modifier keys to show auto graph for parameter by clicking on the corresponding screen controL?
|
CTRL+CMD- one track
CTRL+OPT+CMD- all tracks |
|
How can you display multiple playlists for one track?
|
Click on the triangle in the bottom left corner of the track
|
|
How can you resize individual tracks?
|
CTRL+Click on resize areas
|
|
What is the purpose of setting auto match time preferences?
|
To create a smooth transition from the modified automation value to a track's original value
|
|
Name four different ways to enable plug-in automation.
|
1) OPT+CMD+CTRL+Click parameter
2) OPT+CMD+CTRL+Click plug-in auto enable 3) Click & choose plug-in auto enable 4)Setup>Preferences>Mixing>Automation>Plugin controls default automation enable |
|
What methods of enabling plug-in automation apply to existing plugins?
|
OPT+CMD+CTRL+Click on parameters, OPT+CMD+CTRL+click plugin automation enable, click&choose plugin automation enable
|
|
What methods of enabling plugin automation apply to plugins that are subsequently instantiated?
|
Enabling it from the Setup menu
|
|
What are the options to extend currently writing parameters for specific points during playback using manual write automation modes?
|
Write automation to selection start, write automation to selection, write automation to selection end, write automation to punch point, write automation to next breakpoint
|
|
Name two ways to toggle Automation Follows Edit.
|
The Automation Follows Edit button in the toolbar and in the options menus
|
|
What are the modifier keys when adding breakpoints to constrain to the previous or next breakpoint value?
|
CMD+OPT (for previous), OPT+SHIFT) for next
|
|
Name three ways to suspend automation.
|
1) Click "suspend" in the automation window
2) Set your automation mode to "off" 3) CMD+Click the tack view selector |