• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/46

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

46 Cards in this Set

  • Front
  • Back

Airframes


What is the tire pressure for the nose landing gear?

60 PSI

What are you looking for when inspecting a tire?

Excessive or uneven wear, tread separation, cuts blisters and bulges, embedded objects, tire slippage, contact with deteriorating fluids, sidewall damage, and tire Clearance.

What is the normal brake accumulator gauges precharge and where is it located ?

Nose landing gear right-hand side 1400 1600 psi.

What is the emergency brake accumulator pressure and where is it located

Nose landing gear on left side/900–1100 psi

Where do you find chart for specified service main landing gear tire pressure?

NA – 01–75 GAA – 6–2 card 6.4

What are you checking for on the chine angle bolts located in the main landing gear?

Evidence of torque stripe in any rotation

How many Chine angle bolts are there?

24/12 each main landing gear

Powerplants


How long do you need to wait before fuel samples if the aircraft has been moved, refueled, engines turned or fuel pumps operated time permitting?

3 hours

How long are fuel samples good for?

72 hours

Who can sign for a few samples?

Qualified Aircrew, shift supervisor, CDI, cd QAR, or QAR/QA.

What are you inspecting for?

Water, micro biological growth, and sentiment.

What if contaminants are present?

If contaminants are present retain sample drain approximately 1 gallon of fuel into bucket or other suitable container and take another.

What if you suspect microbiology go growth in fuel samples?

immediately notify maintenance control and take sample to QA. Sample will go to lab for testing.
How many engine oil filters do we have per engine?
2

Where are they located?

Power section and reduction gearbox.

What does an extension of the indicator indicate?

Fluid Contamination.

What is the fuel suppressor service to?



35 –45 PSI



For maintenance instruction what is the limitation to a bleed air check?


AME' S



32-15 no less than 20 seconds





What is the minimum LOX quantity?



10 L liters



Proper service of walk around bottles?



300 - 450 psi



What is the minimum flight station in Cargo compartment air condition turbine oil level?



50%



Where is the chart for proper service level of the fire extinguishers?



Card 20.0 and 20.1 of NA– 01–75GAA – 6–2



200How long can you operate pitot static tube on ground?



30 seconds



What form is the 4790/141?



A sheet

Who signs the A sheet?
Plane Captain, Safe for flight, and Pilot/ TAC

Before doing any maintenance on the aircraft where should you go check first?

M/C and ADB for a list of outstanding discrepancies.

What is the form 4790/38?

Daily record inspection.

What do we do daily inspections IAW?

NA-01-75GAA6-2

What do we turn around inspections in according with IAW?

NA – 01–75 GAA – 6-1

Before working on the aircraft what five things do you check?

A. Aircraft is grounded


B. Chocked


C. Nose landing gear pinned.


D. Fire bottle is around aircraft.


E. Ensure battery is


disconnected

For the 4790 and local instructions how many people do you need for a FOD walk down?

5

Where is the FOD walk down documented?

FOD LOG in M/C.

What is a ORM Debrief used for

A. Lesson learned things that you could've done better.

What can you find in the ADB?

A. Last 10 flights completed/active MAF'S.


B. Last daily and turn around.


C. A- Sheet

Where is ADB?

Maintenance control

Where is a working copy of MMP?

Maintenance control

When do you install Gust locks?

A. If both hydraulic systems are drained.


B. When exceeds 40 knots


C. booster assembly is removed


D. Control surface is disconnected from the hydraulic system.


E. The booster or utility systems is depleted of fluid.


F. Aircraft is going to be in operative for more than seven days.

Missing tools procedures

A. Conduct thorough search of the area.


B. Notify minutes control and QA.


C. Initiate missing tool report.


D. FOD walk down is conducted


E. QA advises QAI of FOD investigation


F. QAO advises MO


G. MO makes final decision

Spill procedures

A. Notify maintenance control


B. Notify fire department.


C. Contains feel using spill kit using PPE.


D. Turn in ways to toolroom as hazwaste.

How many spill kits do we have?

Three one by tool room one in front of Ronald Reagan and one by battery spill kit in front of 200.

How many eyewash stations do we have?

4


A. One and 100 DIV


B. Shower and I watch station outside of hazmat locker.


C. One by QA


D. One by 200

Do we notify fire department if Bill is less than 5 gallons?

Yes and they will replenish the

Who can authorize America move with out brakes?

The move FTS LCDR Berry, SELRES LCDR Wu

What is the man on the stand instruction?

4790.11a

Is it a local or wing instruction?

Wing Instruction

Who can authorize a man on the stand?

MO