Cdi

Front 1

QA Audits are typically for what?

Back 1

Trend Analyze

Front 2

What is the concept of QA?

Back 2

The QA concept is fundamentally the prevention of the occurrence of defects.
Knowledge ; Special Skills; Training

Front 3

What is Quality of Maintenance.

Back 3

All hands Task
QA Staff Direct liaison to QA Officers
QA Duty Responsible for ensuring inspections and workmanship is up to Par.

Front 4

Purpose and function of CDI?

Back 4

Assigned to work centers
Inspect all work and required QA inspection
Report QAO
Spot check work in progress

Front 5

Receiving/Screening Inspection?

Back 5

Apply to material and parts from supply
Condition of material
Proper Identification
Maintenance Requirements
Records and documents in order

Front 6

In-Process Inspection?

Back 6

Inspection of anything that can't be witnessed after final inspection.

Front 7

Final inspection?

Back 7

Performed upon completion or maintenance action.

Front 8

Where are CDI limition are?

Back 8

Cannot witness own work.
Responsible to the QAO.

Front 9

What are the QA managed programs?

Back 9

CTPL
Audit / QA Audit program
NAMDRP
Aircraft Confined Space program
Maint Dept/Division SAFETY
SE Misuse and Abuse

Front 10

CDI's responsibility for tools are?

Back 10

Begin and end shift ATAF
Pre and Post Work ATAF
ATAF Prior to OP Check
Train Juniors on Tool Control

Front 11

What are the responsibilities when signing "Inspected By"

Back 11

Signed by QA Inpectors (QAR, CDQAR, CDI)
Stating all work was done to proper standard.

Front 12

What does NAMDRP stand for?

Back 12

Naval Aviation Maintenance Discrepancy Reporting Program.

Front 13

What is the purpose of NAMDRP?

Back 13

Establish policy
Responsibilites and Requirements for reporting substandard workmanship
Improper QA procedures and deficiencies in material or pubs.

Front 14

Name the types of reports.

Back 14

(HMR) Hazardous Material Report
(EI) Engineering Investigaion
(HMR/EI) A HMR and EI together.
(AIDR) Acceptable Inspection Deficiency Report
(JDRS) Joint Deficiency Reporting System
(TPDR) Technical Publications Deficiency Report
(BTR) Baseline Technical Deficiency Report

Front 15

What are the specification for a (HMR)?

Back 15

Reporting Material Deficiencies that can Damage Aircraft or Hurt Personnel.
Submit VIA JDRS within 24 hours.

Front 16

What are the conditions of (HMR)?

Back 16

Configuration deficiency
Urgent Action
Design Flaw
TFOA

Front 17

Engineering Investigation

Back 17

Investigate Fleet Reported Material Failures
Submit via JDRS within 5 working days.

Front 18

What are the EI conditions?

Back 18

Safety Issues
Additional info required
Aircraft readiness impaired due to poor material reliability.
Component rejected through NOAP.
Directed by Higher Authority.

Front 19

What is (PQDR)?

Back 19

Product quality deficiency report.
Used to report product deficiencies attributable to supplier, contractor or rework.
Not "Y" code

Front 20

What are the two types of CATs in a PQDR?

Back 20

CAT I - Cause Damage, Injury or Death
Submit by message through JDRS within 24 hours.

CAT II - Impact material or human resources but does not affect safety.
Submit via JDRS within 5 working days.

Front 21

What is a (AIDR)?

Back 21

Acceptable Inspection Deficiency Report.
Identifies/Documents defects in newly manufactured, modified or reworked aircraft, including PMI.

Front 22

Acceptable Inspection Deficiency Report descriptions?

Back 22

Submit via JDRS within 5 days of completing acceptance or within 5 working days of FCF.

Front 23

How are AIDR's categorized?

Back 23

Critical - Hazardous or unsafe conditions
Major - Reduce usability or asset
Minor - Unlikely to reduce usability of asset.

Front 24

What does (JDRS) stand for?

Back 24

Joint Deficiency Reporting System.
System used to submit Reports.

Front 25

What is (TPDR)?

Back 25

Technical Publications Deficiency Report
Reporting Safety Hazards and Routine Deficiencies in Tech Pubs

Front 26

What is CAT I of TPDR?

Back 26

CAT I - Injury, death, or damage
Submit within 24 hours

Front 27

What is CAT II of TPDR?

Back 27

Non Safety Related
Delay of 8 hours or more
Submit via web within 5 working days

Front 28

What is CAT III of TPDR?

Back 28

Non safety related
Delay less than 8 hours
Submit VIA web within 5 working days.

Front 29

What is CAT IV of the TPDR?

Back 29

Non safety related
Misspelled words, typographical errors
Submit VIA Web within 5 working days.

Front 30

What are the BTR breakdowns?

Back 30

Report OOMA NALCOMIS Deficiencies
Submit VIA email

Front 31

What is (PMIC)?

Back 31

Periodic Maintenance Information Cards

Shows Hi-Time Hours for Hi-Time Components

Front 32

What is the (MESM)?

Back 32

Mission Essential Subsystem Matrix
Matrix for establishing PMC status

Front 33

What is the vibration Manual?

Back 33

A1-H60CA-VIB-100 Vibration Manual.

Front 34

What are the FCF instructions?

Back 34

4790.12B

Front 35

What is the FCF profile A?

Back 35

30 day no fly
Aircraft Acceptance

Front 36

What is FCF profile B?

Back 36

Powerplants Systems

Front 37

What is the FCF profile C?

Back 37

Controllability
Drive Train
Rotor Systems

Front 38

What is FCF profile D?

Back 38

AFCS

Front 39

What is (B/C) and (C/D) FCF profiles?

Back 39

B/C - Post Phase FCF
C/D - Stab Actuators

Front 40

What are the three sets of audits?

Back 40

Special, Self, and Workcenter

Front 41

What does ALSS stand for?

Back 41

Aircrew Life Support System.

Front 42

QA Audits are typically for what?

Back 42

Trend Analyze