Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
7 Cards in this Set
- Front
- Back
|
Must not pass through contour while contacting the two points on the guard arm, knuckle in pull position.
Rule 16.A.1.b.2 - Coupler Reconditioned Contour |
|
|
Point N must not pass vertically over1/2 or more of nose length with other points contacting knuckle.
Rule 16.A.1.o – Knuckle Nose Worn (Type E) |
|
|
Must not pass through contour while contacting the two points on the guard arm, knuckle in pull position.
Rule 16.C.1 - Coupler Reconditioned Contour |
|
|
Must not pass vertically throughcontour (A) prior to or (B) after parts replacement. Rule 18.A.1.b.2 – F Coupler Contour Gage |
|
|
Must seat with knuckle in locked andpulled position. Rule 18.A.1.j – Coupler Guard Arm Gage |
|
|
Point N must not pass vertically over1/2 or more of nose length with other points contacting knuckle. Rule 18.A.1.l – Knuckle Nose Worn (Type F) |
|
|
Point D must not touch or clear morethan 1/4” with other points seated. Rule 18.A.1.l - Knuckle Wear and Stretch Gage |