Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
50 Cards in this Set
- Front
- Back
|
04.01
On an Ethernet switched network, what address does one host computer use to communicate with another? A. IP address B. MAC address C. Street address D. HUB address |
On an Ethernet switched network, what address does one host computer use to communicate with another? A. IP address B. MAC address C. Street address D. HUB address |
|
|
04.02 Which of the following can run full-duplex and achieve 200Mbps with CAT5e cable? A. 100Base-F B. 100Base-T C. 1000Base-F D. 1000Base-T |
Which of the following can run full-duplex and achieve 200Mbps with CAT5e cable? A. 100Base-F B. 100Base-T (100Base-TX uses CAT5) C. 1000Base-F D. 1000Base-T |
|
|
04.03 How many devices in a collision domain have to listen when a single host talks? A. 2 B. 3 C. 1 D. All |
How many devices in a collision domain have to listen when a single host talks? A. 2 B. 3 C. 1 D. All (This is the biggest drawback of a CD since it slows the network down) |
|
|
04.04 If you are using a cable medium called 100Base-TF, what does this mean? A. That you are running Ethernet over cable B. Ethernet over fiber C. Ethernet over ThickNet D. That you are bundling multiple connections |
If you are using a cable medium called 100Base-TF, what does this mean? A. That you are running Ethernet over cable B. Ethernet over fiber C. Ethernet over ThickNet D. That you are bundling multiple connections |
|
|
04.05 What protocol helps devices share the bandwidth evenly without having two devices transmit at the same time on the network medium? A. TCP/IP B. CSMA/CD C. HTTPS D. TFTP |
What protocol helps devices share the bandwidth evenly without having two devices transmit at the same time on the network medium? A. TCP/IP B. CSMA/CD C. HTTPS D. TFTP |
|
|
04.06 What is the maximum distance of 10GBase-SR? A. 100 meters (328 feet) B. 302 meters (990 feet) C. 305 meters (1000 feet) D. 1593 km (6 miles) |
What is the maximum distance of 10GBase-SR? A. 100 meters (328 feet) B. 302 meters (990 feet) C. 305 meters (1000 feet) D. 1593 km (6 miles) |
|
|
04.07 How many wire pairs are used with half duplex? A. 2 B. 1 C. 4 D. None of the above |
How many wire pairs are used with half duplex? A. 2 B. 1 C. 4 D. None of the above |
|
|
04.08 How many wire pairs are used with 100Base-T full duplex? A. 2 B. 1 C. 4 D. A or C |
How many wire pairs are used with 100Base-T full duplex? A. 2 B. 1 C. 4 D. A or C |
|
|
04.09 What is the maximum distance of 100GBase-LR? A. 1 mile B. 3 miles C. 6 miles D. 25 miles |
What is the maximum distance of 100GBase-LR? A. 1 mile B. 3 miles C. 6 miles D. 25 miles |
|
|
04.10 What is the effective total throughput increase with a full-duplex connection? A. None B. Twice as much C. Four times as much D. Ten times as much |
What is the effective total throughput increase with a full-duplex connection? A. None B. Twice as much C. Four times as much D. Ten times as much |
|
|
04.11 What device can you not use full-duplex communication with? A. Host B. Hub C. Switch D. Router |
What device can you not use full-duplex communication with? A. Host B. Hub C. Switch D. Router |
|
|
04.12 What is the decimal equivalent of this binary number: 11000000.10101000.00110000.11110000? A. 192.168.48.192 B. 192.168.48.240 C. 192.168.64.224 D. 192.168.32.248 |
What is the decimal equivalent of this binary number: 11000000.10101000.00110000.11110000? A. 192.168.48.192 B. 192.168.48.240 C. 192.168.64.224 D. 192.168.32.248 |
|
|
04.13 Which technology increases the bandwidth for network transmission by joining together multiple connections in one logical connection? A. Bonding B. VLANs C. STP D. Traffic Shaping |
Which technology increases the bandwidth for network transmission by joining together multiple connections in one logical connection? A. Bonding B. VLANs C. STP D. Traffic Shaping |
|
|
04.14 How is the decimal value 10 represented in binary? A. 1000 B. 1001 C. 1010 D. 1011 |
How is the decimal value 10 represented in binary? A. 1000 B. 1001 C. 1010 D. 1011 |
|
|
04.15 What is the decimal value for the binary number 11101000? A. 128 B. 194 C. 224 D. 232 |
What is the decimal value for the binary number 11101000? A. 128 B. 194 C. 224 D. 232 |
|
|
04.16 What is the decimal number 10 in hexadecimal? A. 9 B. A C. C D. B |
What is the decimal number 10 in hexadecimal? A. 9 B. A C. C D. B |
|
|
04.17 How many bits is a MAC address? A. 16 B. 32 C. 48 D. 64 |
How many bits is a MAC address? A. 16 B. 32 C. 48 D. 64 |
|
|
04.18 The maximum distance of 1000Base-T is? A. 100 Meters (328 feet) B. 128 meters (420 feet) C. 1000 meters (3280 feet) D. 1024 meters (3360 feet) |
The maximum distance of 1000Base-T is? A. 100 Meters (328 feet) B. 128 meters (420 feet) C. 1000 meters (3280 feet) D. 1024 meters (3360 feet) |
|
|
04.19 What is the purpose of the Frame Check Sequence (FCS) in an Ethernet frame? A. Error correction B. Error detection C. Error recovery D. Creating errors |
What is the purpose of the Frame Check Sequence (FCS) in an Ethernet frame? A. Error correction B. Error detection C. Error recovery D. Creating errors |
|
|
04.20 What does the Base mean in 100Base-TX? A. Broadband B. 100Mbps C. Baseband D. Twisted pair at 100Mbps |
What does the Base mean in 100Base-TX? A. Broadband B. 100Mbps C. Baseband D. Twisted pair at 100Mbps |
|
|
04.21.1
Provide the missing for Ethernet standard... Name: 10Base-T Cabling: ? Distance: 100 M (~300 ft) Rate: 10 Mbps |
Provide the missing for Ethernet standard... Name: 10Base-T Cabling: Cat3 or Cat5 Distance: 100 M (~300 ft) Rate: 10 Mbps |
|
|
04.21.2 Provide the missing for Ethernet standard... Name: 10Base-T Cabling: Cat3 or Cat5 Distance: ? Rate: 10 Mbps |
Provide the missing for Ethernet standard... Name: 10Base-T Cabling: Cat3 or Cat5 Distance: 100 M (~300 ft) Rate: 10 Mbps |
|
|
04.21.3 Provide the missing for Ethernet standard... Name: ? Cabling: Cat3 or Cat5 Distance: 100 M (~300 ft) Rate: 10 Mbps |
Provide the missing for Ethernet standard... Name: 10Base-T Cabling: Cat3 or Cat5 Distance: 100 M (~300 ft) Rate: 10 Mbps |
|
|
04.22.1 Provide the missing for Ethernet standard... Name: ? Cabling: Cat5 Distance: 100 M (~300 ft) Rate: 100 Mbps |
Provide the missing for Ethernet standard... Name: 100-Base-TX Cabling: Cat5 Distance: 100 M (~300 ft) Rate: 100 Mbps |
|
|
04.22.2 Provide the missing for Ethernet standard... Name: 100-Base-TX Cabling: ? Distance: 100 M (~300 ft) Rate: 100 Mbps |
Provide the missing for Ethernet standard... Name: 100-Base-TX Cabling: Cat5 Distance: 100 M (~300 ft) Rate: 100 Mbps |
|
|
04.22.3 Provide the missing for Ethernet standard... Name: 100-Base-TX Cabling: Cat5 Distance: ? Rate: 100 Mbps |
Provide the missing for Ethernet standard... Name: 100-Base-TX Cabling: Cat5 Distance: 100 M (~300 ft) Rate: 100 Mbps |
|
|
04.23.1 Provide the missing for Ethernet standard... Name: ? Cabling: MMF Distance: 2,000 M Rate: 100 Mbps |
Provide the missing for Ethernet standard... Name: 100-Base-FX Cabling: MMF Distance: 2,000 M Rate: 100 Mbps |
|
|
04.23.2 Provide the missing for Ethernet standard... Name: 100-Base-FX Cabling: ? Distance: 2,000 M Rate: 100 Mbps |
Provide the missing for Ethernet standard... Name: 100-Base-FX Cabling: MMF Distance: 2,000 M Rate: 100 Mbps |
|
|
04.23.3 Provide the missing for Ethernet standard... Name: 100-Base-FX Cabling: MMF Distance: ? Rate: 100 Mbps |
Provide the missing for Ethernet standard... Name: 100-Base-FX Cabling: MMF Distance: 2,000 M Rate: 100 Mbps |
|
|
04.24.1 Provide the missing for Ethernet standard... Name: ? Cabling: Cat 5e (all 4 pairs) Distance: 100 M (330 ft) Rate: 1000 Mbps |
Provide the missing for Ethernet standard... Name: 1000Base-T Cabling: Cat 5e (all 4 pairs) Distance: 100 M (330 ft) Rate: 1000 Mbps |
|
|
04.24.2 Provide the missing for Ethernet standard... Name: 1000Base-T Cabling: ? Distance: 100 M (330 ft) Rate: 1000 Mbps |
Provide the missing for Ethernet standard... Name: 1000Base-T Cabling: Cat 5e (all 4 pairs) Distance: 100 M (330 ft) Rate: 1000 Mbps |
|
|
04.24.3 Provide the missing for Ethernet standard... Name: 1000Base-T Cabling: Cat 5e (all 4 pairs) Distance: ? Rate: 1000 Mbps |
Provide the missing for Ethernet standard... Name: 1000Base-T Cabling: Cat 5e (all 4 pairs) Distance: 100 M (330 ft) Rate: 1000 Mbps |
|
|
04.25.1 Provide the missing for Ethernet standard... Name: ? Cabling: Cat 6 (only 2 pairs) Distance: 100 M (330 ft) Rate: 1000 Mbps |
Provide the missing for Ethernet standard... Name: 1000Base-TX Cabling: Cat 6 (only 2 pairs) Distance: 100 M (330 ft) Rate: 1000 Mbps |
|
|
04.25.2 Provide the missing for Ethernet standard... Name: 1000Base-TX Cabling: ? Distance: 100 M (330 ft) Rate: 1000 Mbps |
Provide the missing for Ethernet standard... Name: 1000Base-TX Cabling: Cat 6 (only 2 pairs) Distance: 100 M (330 ft) Rate: 1000 Mbps |
|
|
04.25.3 Provide the missing for Ethernet standard... Name: 1000Base-TX Cabling: Cat 6 (only 2 pairs) Distance: ? Rate: 1000 Mbps |
Provide the missing for Ethernet standard... Name: 1000Base-TX Cabling: Cat 6 (only 2 pairs) Distance: 100 M (330 ft) Rate: 1000 Mbps |
|
|
04.26.1 Provide the missing for Ethernet standard... Name: ? Cabling: Cat 6 or 6a Distance: 55 M (using Cat6) or 100 M (using Cat 6a) Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-T Cabling: Cat 6 or 6a Distance: 55 M (using Cat6) or 100 M (using Cat 6a) Rate: 10 Gbps |
|
|
04.26.2 Provide the missing for Ethernet standard... Name: 10G-Base-T Cabling: ? Distance: 55 M (using Cat6) or 100 M (using Cat 6a) Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-T Cabling: Cat 6 or 6a Distance: 55 M (using Cat6) or 100 M (using Cat 6a) Rate: 10 Gbps |
|
|
04.26.3 Provide the missing for Ethernet standard... Name: 10G-Base-T Cabling: Cat 6 or 6a Distance: ? Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-T Cabling: Cat 6 or 6a Distance: 55 M (using Cat6) or 100 M (using Cat 6a) Rate: 10 Gbps |
|
|
04.27.1 Provide the missing for Ethernet standard... Name: ? Cabling: MMF using 85 nm laser Distance: 300 M Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-SR or 10G-Base-SW Cabling: MMF using 85 nm laser Distance: 300 M Rate: 10 Gbps |
|
|
04.27.2 Provide the missing for Ethernet standard... Name: 10G-Base-SR or 10G-Base-SW Cabling: ? Distance: 300 M Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-SR or 10G-Base-SW Cabling: MMF using 85 nm laser Distance: 300 M Rate: 10 Gbps |
|
|
04.27.3 Provide the missing for Ethernet standard... Name: 10G-Base-SR or 10G-Base-SW Cabling: MMF using 85 nm laser Distance: ? Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-SR or 10G-Base-SW Cabling: MMF using 85 nm laser Distance: 300 m Rate: 10 Gbps |
|
|
04.28.1 Provide the missing for Ethernet standard... Name: ? Cabling: SMF using 1310 nm laser Distance: 10 km Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-LR Cabling: SMF using 1310 nm laser Distance: 10 km Rate: 10 Gbps |
|
|
04.28.2 Provide the missing for Ethernet standard... Name: 10G-Base-LR Cabling: ? Distance: 10 km Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-LR Cabling: SMF using 1310 nm laser Distance: 10 km Rate: 10 Gbps |
|
|
04.28.3 Provide the missing for Ethernet standard... Name: 10G-Base-LR Cabling: SMF using 1310 nm laser Distance: ? Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-LR Cabling: SMF using 1310 nm laser Distance: 10 km Rate: 10 Gbps |
|
|
04.29.1 Provide the missing for Ethernet standard... Name: ? Cabling: SMF using 1550 nm laser Distance: 40 km Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-ER Cabling: SMF using 1550 nm laser Distance: 40 km Rate: 10 Gbps |
|
|
04.29.2 Provide the missing for Ethernet standard... Name: 10G-Base-ER Cabling: ? Distance: 40 km Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-ER Cabling: SMF using 1550 nm laser Distance: 40 km Rate: 10 Gbps |
|
|
04.29.3 Provide the missing for Ethernet standard... Name: 10G-Base-ER Cabling: SMF using 1550 nm laser Distance: ? Rate: 10 Gbps |
Provide the missing for Ethernet standard... Name: 10G-Base-ER Cabling: SMF using 1550 nm laser Distance: 40 km Rate: 10 Gbps |
|
|
04.30.1 Provide the missing for Ethernet standard... Name: ? Cabling: Coax Distance: 185 m Rate: 10 Mbps |
Provide the missing for Ethernet standard... Name: 10Base2 or Thinnet Cabling: Coax Distance: 185 m Rate: 10 Mbps |
|
|
04.30.2 Provide the missing for Ethernet standard... Name: 10Base2 or Thinnet Cabling: ? Distance: 185 m Rate: 10 Mbps |
Provide the missing for Ethernet standard... Name: 10Base2 or Thinnet Cabling: Coax Distance: 185 m Rate: 10 Mbps |
|
|
04.30.3 Provide the missing for Ethernet standard... Name: 10Base2 or Thinnet Cabling: Coax Distance: ? Rate: 10 Mbps |
Provide the missing for Ethernet standard... Name: 10Base2 or Thinnet Cabling: Coax Distance: 185 m Rate: 10 Mbps |
