• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/19

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

19 Cards in this Set

  • Front
  • Back
Q2-1. What does the acronym IFF stands for?
A2-1. Identification Friend or Foe.
Q2-2. What are the three basic steps in the identification
process of a typical IFF system?
A2-2. Challenge, decode, and reply.
Q2-3. True or False. All naval aircraft contain an
interrogator system.
A2-3. False.
Q2-4. What is the pulse spacing of Mode 1?
A2-4. 2.9 to 3.1 s.
Q2-5. Of the six modes of IFF operation, which one
is used by military and civilian aircraft
control stations?
A2-5. Mode 3/A.
Q2-6. What mode IFF is the military encrypted
mode?
A2-6. Mode 4.
Q2-7. What is the transmission frequency of the
interrogator?
A2-7. 1030 MHz.
Q2-8. In a typical IFF/SIF system, what total
number of codes can be selected in Mode 2?
A2-8. 4,096.
Q2-9. The Identification of Position (I/P) pulse is
used for what purpose?
A2-9. It is used to identify a specific friendly aircraft among other friendly aircraft that
reply with the same code.
Q2-10. What mode of IFF is set prior to takeoff by
maintenance personnel?
A2-10. Mode 2.
Q2-11. Where are Modes 1 and 3/A selected on the
AN/APX-72 transponder set?
A2-11. By thumbwheel switches on the front of the control box.
Q2-12. What part of the APX-72 system provides for
ground or in-flight transponder testing
capability?
A2-12. The Transponder Test Set TS-1843/APX.
Q2-13. The AN/APX-72 generates a signal of what
frequency when interrogated?
A2-13. 1090 MHz.
Q2-14. The interrogator works in conjunction with
what other aircraft system?
A2-14. The radar.
Q2-15. What component of the interrogator set is
used to select SIF reply codes for Modes 1, 2,
and 3/A?
A2-15. C-7383/APX-76(V) control box.
Q2-16. What component monitors the timing
triggers, pre-triggers, gates, and test video
and causes the fault indicator lamp on the
interrogator control to illuminate when a
fault has been detected within the system?
A2-16. Electronic Synchronizer SN-416/APX-76(V).
Q2-17. The APX-100 transponder set is available in
what number of configurations?
A2-17. The system comes in two configurations.
Q2-18. To respond to Mode 4 interrogations, the IFF
transponder set system requires what additional
components?
A2-18. Transponder Computer KIT-1/TSEC.
Q2-19. What APX-100 system is referred to as the
rack-mounted configuration?
A2-19. Receiver/Transmitter RT-1157/APX-100.