• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/18

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

18 Cards in this Set

  • Front
  • Back

How is support equipment (SE) normally identified?

Powered and Non-powered
Name a type of common powered SE
Mobile electric power plant (MEPPs)
What engine powers the A/S32A-45 Mid-Range Tow Tractor (MRTT)?
Four-cylinder diesel engine

Shipboard tow tractors (STTs) are used to operate in what location?

CVNs and L-class air-capable ships.
What equipment indicator code does 32 in the A/S32A-45 Tow Tractor stand for?
Mechanical

What is the purpose of the Engine Installation and Removal Vehicle (EIRV)?

Remove and install t-56 engines and propellers
Mobile Electric Power Plants (MEPPs) supply what type of servicing?
Regulated electrical power for aircraft servicing, starting, maintenance, and testing.
Where is the A/S37A-3 MEPP designated to be used?
Shipboard
What type of current does the A/M24M-5 Static Frequency Converter (SFC) supply to the aircraft?
115-VAC
What type of refrigerant is used in the A/M23C-23 mobile air-conditioner?
R-22
The MSU-200NAV Air Start Unit is designated to provide what type of power?
Pneumatic
Maintenance platforms are designated for what purpose?
To safely reach or work on parts of the aircraft inaccesible from the ground.
What is the working height, in feet, of a B-4 Stand?
3 - 7 feet
What type of work stands are the most common type?
B-4 and B-5
What is the load capacity of the 3000B trailer?
8000 lbs.
The 4000B Engine Removal/Installation Trailer Hydraulic System consist of which components?
4 hydraulic frame lift arms that raise and lower the upper frame assembly.
What action is always required prior to operating the hangar engine hoist?
Pre-operational Inspection.
What actions are safety precautions when an engine is being supported by a hoist?
Always make sure the hoist load test date is current and that the cable is not damaged.