Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
110 Cards in this Set
- Front
- Back
What program is in-service training for aviation units designed to encompass and standardize technical training and quantify maintenance levels across all aviation platforms? |
QPT |
|
What officer shall designate, in writing via the MMP, a QAR (normally, a Power Plants QAR) as the Fuel Surveillance Program Montor? |
QA |
|
Oxygen comes in what two states? |
Gaseous and liquid |
|
What serves as an orderly method of identifying, investigagting, and correcting deficiencies on a scheduled and unscheduled basis? |
Audtis |
|
All servicing SE will be equipped with what type of filtration? |
3-micron |
|
What can introduce small amounts of free water in empty partially filled fuel cells/tanks? |
Condensation of moist air |
|
The MediaTrax library contains more than how many modules of training that includes, but is not limited to, eleven T/M/S aircraft, Ordnance, I-level Avionics, and SE? |
1200 |
|
What type of contamination causes hydraulic system and component failures and presents a serious threat to flight safety? |
Hydraulic fluid |
|
What program establishes policy, responsibilities, and requirements for implementing and maintaining techniques to prevent contamination of aircraft oxygen systems and components through careful and safe handling, surveillance, and quality control? |
ABO |
|
What maintains and increases technical knowledge and proficiency? |
Maintenance IST |
|
What program establishes policy, responsibilities, and requirements for evaluating performance throughout the Maintenance Department? |
QA Audit |
|
What establishes policy, responsibilities, and requirements for monitoring equipment condition in an effort to detect impending failures without equipment removal or extensive disassembly? |
NOAP |
|
All LOX/gaseous operations shall be performed by how many or more qualified persons, except for removal and replacement of aircraft LOX converters? |
Two |
|
The MP&T Coordinator is only assigned to CV IMAs and the larger (how many or above manning during the year, including TAD personnel) Navy shore IMAs which provide I-level support for a significant number of aviation activities? |
500 |
|
What is an on-line tool that supports life-cycle management related to the upkeep and revision of training procedures, training applications, software, and hardware for IMI items? |
TTCMS |
|
What is the preferred hydraulic fluid contamination analysis equipment and shall be used when available? |
Electronic Particle Counter |
|
What QPT Certification level is generally E-5 and E-6 personnel, this syllabi includes incomplete QPA items for personnel new to the T/M/S, more in-depth technical date specific to the T/M/S aircraft (T/M/S specific PQS), advanced maintenance documentation/NALCOMIS, shop and shift workload management, and any additional qualifications deemed appropriate for QPJ certification? |
QPJ |
|
Tank fuel samples should be taken prior to first engine run of the day, or how often as minimum? |
Weekly |
|
Ensure bearings are protected from careless handling and contamination from abrasives, improper greases, solids, fluids, and salt water per what? |
NAVAIR 01-1A-503 |
|
Indoctrination training per NAMP Training Requirements shall be provided to personnel within 30 days of reporting to the Maintenance Department, but may be extended to how many days if mitigating circumstances exist? |
60 |
|
All RFI tires being transported off station shall not exceed how many pounds PSIG of pressure? |
25 |
|
What program establishes policy, responsibilities, and requirements for implementing procedures to maintain a satisfactory level of aircraft and engine fuel systems? |
Fuel Surveillance Program |
|
What QPT Certification level is generally for E-7 and E-8 personnel, this syllabi includes items appropriate for the efficient and safe management of aircraft maintenance/production and the administration of personnel? |
QPM |
|
Maximum acceptable hydraulic fluid participate contamination levels are Navy Standard Class ___ for aircraft and Navy Standard Class ___ for SE? |
5, 3 |
|
What is the process of removing air, water, solid particles, and chlorinated solvents from hydraulic fluids? |
Purification |
|
What consists of personnel performing maintenance tasks, by demonstration and simulation, under the supervision of designated, qualified personnel? |
QJT |
|
What QPT Certification level is generally for E-4 and below personnel, this syllabi includes general and rating specific items addressing flight-line and work place safety, basic aircraft servicing and inspection, SE licensing, basic maintenance documentation/NALCOMIS, minimal rating knowledge (typically limited to the identification and removal of components), the identification, use and handling hazardous material, and any additional qualifications deemed appropriate for QPA certification? |
QPA |
|
Ensure aircraft on extended cross country flights have the last ___ oil sample results annotated on the reverse side of the Oil Analysis Request (DD 2026) in case of potential sampling requirements at a transient station oil laboratory. |
Three |
|
Process and return all sample results via the fastest possible means. For samples with abnormal results, advise the customer activity of the laboratory recommendation no later than ___ after sample receipt per NAVAIR 17-15-50.2. |
24 hours |
|
RFI aircraft/tire wheel assemblies shall not exceed ___ pounds PSIG or ___ percent of test pressure, whichever is less, while being stored? |
100, 50 |
|
What program establishes policy, responsibilities, and requirements for monitoring aircraft equipment condition in an effort to detect impending failures without equipment removal or extensive disassembly? |
Oil Consumption Program |
|
CAT 1 TPDR priority message shall be submitted within how many hours of safety related deficiency?
|
24 hours
|
|
What defects could result in failure or materially reduce usability of the unit for its intended purpose? |
Major |
|
What is defined as material procured under contract from commercial or government sources or manufactured by an organic fuel? |
New Material |
|
What provides a systematic, coordinated method of investigating suspected or known deficiencies in specific maintenance work centers, programs, or personnel? |
Special Audits |
|
What defects are not likely to materially reduce usability of the unit or product for its intended purpose, or depart from established standards? |
Minor |
|
JDRS, shall be made ___ days after the Preliminary Disposition Report release, but the period may be extended if it is known that shipment will take longer. |
20 |
|
Maintain audit files ___. These files shall include completed CSEC discrepancy sheets, corrective actions, QA follow-up annotations, and accompanying routing forms. |
Two years |
|
Per ___, the NAVSAFECEN may provide a representative to assist an AMB, and in certain special cases, conduct an independent safety investigation. |
OPNAVIST 3750.6 |
|
Who is responsible for processing HMRs, EIs, and HMR/EIs for assigned material? |
ISSC |
|
Ensure the interim or final reply does not exceed ____ calendar days for CAT II PQDRs not requiring exhibits or ___ calendar days after receipt of exhibit CAT II PQDRs with exhibits. |
45, 60 |
|
Every effort shall be made to complete resolution and issue corrective action within ___ of receipt of CAT I TPDRs. |
30 days |
|
The preferred method to submit BTRs is by what method? |
|
|
What provides a simplified procedure for reporting safety hazards and routine deficiencies found in COMMNAVAIRSYSCOM technical publications? |
TPDR |
|
Ensure corrective action and QA follow-up on dsicrepant areas are performed within a reasonable time frame (normally ___ working days) and that the corrective action is adequate? |
Ten |
|
What is any activity having the responsibility for shipping/receiving EI related material? |
Support activity |
|
Ensure the interim or final reply does not exceed ___ calendar days for CAT I PQDRs not requiring exhibits or ___ calendar days after the receipt of the exhibit for CAT I PQRDs with exhibits? |
28, 45 |
|
Audit the unit users enrolled in JDRS on a ___ basis, for example, identifying users who have transferred or no loner require access, and provide feedback via the Contact Us tool to update, delete, or change unit personnel profiles? |
Monthly |
|
What defects constitute hazardous or unsafe conditions, or as determined by experience and judgement could conceivably become so, thus making the aircraft unsafe for flight or endangering operating personnel? |
Critical |
|
What establishes policy, responsibilities, and requirements for reporting substandard workmanship, improper QA procedures, and deficiencies in material and publications? |
NAMDRP |
|
All TDs shall be prepared and processed by the ISSC or PMA per what requirements? |
NAVAIR 00-25-300 |
|
What is an engineering process by which the originator accomplishes all tasks required by a proposed change to ensure the the modified items function as intended? |
Validation |
|
When a TD is to be issued in parts, the first or basic issuance of the TD will always be what, even though it will not be identified as ___ in the TD number? |
Part 1 |
|
How many types of Technical Directives (TD) are there? |
Four |
|
What is a TD which directs a one-time inspection to determine if a given condition exists and specifies what action shall be taken if the condition is found? |
Bulletin |
|
The concept of what program is fleet self-help? |
RAMEC |
|
RAMECs shall have a maximum rescission interval of how many years after date of issue? |
5 |
|
TCDs for Record Purpose TDs shall be how any months or less from date of CCB approval? |
18 |
|
What is the primary COMNAVAIRSYSCOM document for implementing a configuration change? |
Formal Change TD |
|
Who are authorized to prepare and issue bulletins, changes, interim changes, and RAMECs, except those which restric flight operations? |
ISSC |
|
What system provides on-line configuration status accounting for naval aircraft, engines, SE, maintenance trainers, and serial numbered weapon system components? |
TDSA |
|
What is the process for determining the accuracy and adequacy of a proposed TD and reporting results to the preparing activity? |
Verification |
|
What TD category is assigned to Formal Change TDs issued to document configuration changes that have been incorporated in all affected equipment by the change designer/originator before the TD is issued? |
Record Purpose |
|
Copies of TD summaries shall be annotated and maintained on file by each activity for a period of how long? |
6 months |
|
What TD category will be assigned whenever the urgency of the situation does not warrant assignment of Intermediate or Urgent Action categories and the assignment of Record Purpose would be inappropriate> |
Routine Action |
|
What TD category is assigned when unsafe conditions exist which, if uncorrected, could result in fatal or serious injury to personnel, or extensive damage to or destruction of valuable property; and such conditions embody risks which are calculated to be unacceptable? |
Immediate Action |
|
O-level or I-level compliance normally will not be assigned when equipment out-of-service time will exceed 8 hours or if more than ___ man-hours per compliance action will be required. |
10 |
|
The CNO and CMC (as appropriate) shall be advised of the cause and effect of the pending action using a Red Stripe memorandum per what instruction? |
NAVAIRINST 5216.11 |
|
The Record Purpose category may be assigned only to Formal Change TDs and only when the period for change incorporation in all affected systems is ___ months or less. |
12 |
|
What TD category is assigned when factors of combat necessity, potential hazardous conditions which could result in personal injury or damage to valuable property, or unacceptable reductions in operational readiness exist; and such conditions, if uncorrected, would compromise safety or embody risks which are calculated to be acceptable within defined time/performance limits? |
Urgent Action |
|
What is a history file created and maintained by COMNAVAIRSYSCOM (AIR-6.3.5) to reduce active file volume and operating cost? |
List No. 04H |
|
What program establishes policy, responsibilities, and requirements to prevent damage to aircraft, engines, SE and other aeronautical equipment, and to provide uniform FOD reporting procedures? |
FOD Prevention |
|
Upon designation as Program Manager, a self-audit shall be performed within how many days and anually thereafter using CSEC. The most current self-audit shall be retained within the program binder? |
30 |
|
Who (O-level, I-level, and FRC activities), with the assistance from the Tool Control Representative, shall etch tools contained with a container number identical to the container number assigned? |
TCP Coordinator |
|
Ensure designated plane captains assigned away from plane captain duties over how many days receive refresher training and are interviewed by the Program Manager prior to assuming plane captain duties? |
90 |
|
What is a condition where a foreign object is in a position to cause damage when a product or system is used? |
Potential FOD |
|
Who shall ensure Plane Captain Qualification Program indoctrination and follow-on training is provided to personnel? |
Work center supervisors |
|
Wing Material Condition Inspectors shall complete the Aircraft Corrosion Control course (Course N-701-0013) or Aircraft Corrosion course (Course C-600-3183) within how many days of assignment? |
90 |
|
What is used to document all TD compliance? |
MAF |
|
Who has authority to approve TD removal via message if operational necessity dictates? |
ACC |
|
What program establishes policy, responsibilities, and requirements to delineate the procedures and guidelines for the qualification, designation, recertification, and suspension/revocation of plane captains? |
Plane Captain Qualification |
|
Any aircraft with AWM corrosion discrepancies that are within maintenance capability shall be restricted from flight if the discrepancies are not corrected within how many calendar days from the date of discover? |
28 |
|
Who is responsible for shift change and semiannual inventories of tools assigned to the tool room? |
Tool Room Supervisor |
|
Wing Material Condition Inspectors shall complete inspection OJT with FRC PMI representatives how often to include general inspection techniques, common discrepancy issues and current specific areas of interest being observed by the FRC/ISSC/TYCOM team? |
Annually |
|
What directives contain information that includes material requirements, tool inventories, and detailed instructions for the implementation and operation of the TCP for a specific type/model aircraf? |
TCM/local tool |
|
What establishes policy and responsibilities for implementing, maintaining, controlling, storing, replacing, and inventorying common hand tools? |
TCP |
|
What is defined as a tool inventory or container layout diagram that is changed and is determined to have fleet-wide applications? |
TCM change |
|
Each engine FOD incident (including FOD due to natural causes, such as birds or ice) shall be investigated, and an Engine FOD incident shall be submitted by the FOD Prevention Program Manager within how many working days of discovery for each reportable FOD? |
5 |
|
What activities shall establish local procedures for investigating, approving, and disapproving all request for modifications, additions, and deletions to /from existing tool containers using local forms? |
COMFRC |
|
Message type TDs released after what date and missing ACC/TYCOM concurrence and amplifying remarks paragraph shall not be taken for action? |
06 February 2008 |
|
COMNAVSEASYSCOM is the lead systems command for the Navy's METCAL Program. What instruction outlines the responsibilities of the lead systems command? |
OPNAVIST 3960.16 |
|
QA shall administer written Phase II examinations. A passing grade of what percent is required? |
85% |
|
Initiate depot repair actions on IMRL assets per what instruction if repair is beyond FCA capability? |
NAVAIRINST 13680.1 |
|
What (NAVSEA 4734/15 and NAVSEA 4734/16) are used when unusual or special conditions should be noted, such as deviations from usual calibration tolerances, multiple calibration intervals, a special requirement for in-place calibration or to refer to a correction factor chart? |
Special Calibration |
|
What form is used to record acceptance information, custody and transfer, record of reqork, preservation/depreservation, TDs and inspections that involve NDI, proofload testing, and disassembly/reassembly? |
OPNAV 4790/51 |
|
What includes all equipment used to make an aeronautical system or end item operational in its intended enviornment? |
Support Equipment (SE) |
|
What lists all calibratable PME/TMDE under a customer activity's cognizance. It provides part number, serial number, subcustodian, calibration interval, and next due date? |
Inventory Format 310 |
|
What lists all equipment scheduled into a laboratory, by due date; that is overdue for calibration, due calibration in the present month and the upcoming 2 months? |
Recall Format 805 |
|
Like items maintained in large quantities (how many or more) may be grouped into homogeneous lots for PMS inspections? |
10 |
|
What program establishes policy, responsibilities, and requirements to ensure SE/TMDE performance is compared to reference CALSTDs of known and sufficiently greater accuracy? |
METCAL |
|
An analysis of these qualifying customers' D-level calibration requirements is made approximately how many days prior to the beginning of each fiscal year quarter? |
30 |
|
What (NAVSEA 4734/8, NAVSEA 4734/9, and NAVSEA 4734/11) are the most commonly used labels in the Navy METCAL Program? |
Cailibrated |
|
How many days prior to deployment, review METCAL requirements and annotate shortages and due dates of assets held by squadron or detachment? |
60 |
|
What standards embedded with ATE are maintained by two Atlantic area and two Pacific area D-level calibration sites? |
Calibration |
|
Ensure egress/explosive system training and checkout for all maintenance personnel upon reporting aboard and every how often thereafter? |
6 months |
|
SE operator licenses are valid for type equipment and aircraft for how long, regardless of activity assigned? |
3 years |
|
How many days prior to deployment, review METCAL requirements with Type Wing and supporting FCA Program Manager? |
30 |
|
What inspections shall be conducted on SE/AWSE prior to the first anticipated use each day and prior to each use specified and applicable MRCs? |
Preoperational |
|
Ensure SE Phase I instructors are trained and capable in the proper techniques on instruction. Instructors shall be designated in writing, be what rank or above or civilian, and licensed on all SE for which designated to provide training? |
E-5 |
|
Review MEASURE Inventory Formats 310 and 311 monthly upon receipt and submit required corrections to the cognizant MOCC within how many working days? |
10 |