Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
16 Cards in this Set
- Front
- Back
|
What is the Onboard Training Team (OBTT) used for?
|
To assess watch station performance drills and exercises.
|
|
|
Which OBTT member is responsible for record keeping during and after the exercise?
|
Training Team Leader
|
|
|
What is the Maximum number of members that can be assigned to a large cutter's OBTT
|
No specific maximum
|
|
|
Which if the following OBTTs must be established specifically for cutters 175 feet and over in legth?
|
Integrating Traing Team (ITT)
|
|
|
When the OBTT is planning an exercise drill, consideration must be given to the possibility of what situation?
|
Actual hazardous condition
|
|
|
Once the drill plan has been put together, what risk assessment model is used to determine if unnecessary risks are being taken and that safety precautions have been established?
|
GAR
|
|
|
What is the maximum numerical score that should be used on the exercise evaluation sheets?
|
100
|
|
|
How many points will be deducted from the overall drill score for a major safety violation?
|
40
|
|
|
What may actually be considered as the MOST important part of a drill exercise?
|
Collecting and providing accurate feedback
|
|
|
Exercise evaulations will be maintained by the training officer for a MINIMUM of how many years after the exercise has been completed?
|
2 years
|
|
|
What three things will determine the number of OBTT members required to conduct an exercise?
|
Purpose, Requirement & complexity.
|
|
|
The OBTT members will assist the commanding officer with __________ and _________?
|
Training, Evaluating
|
|
|
What is the Minimum number of OBTT members assigned on a large cutter?
|
Three (3)
|
|
|
Why is it important to record time required to perform all necessary operations during an engineering casualty drill?
|
CO can estimate a casualty situation
|
|
|
What are the FIRST two things that must be identified by the OBTT when properly planning an exercise?
|
objective and purpose
|
|
|
Why is a safety walk-through always completed before training?
|
Condition have not change before drill begins & safety hazards
|
