Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
12 Cards in this Set
- Front
- Back
|
Name 3 types of Load |
Tention, compression and shear |
|
|
Tension test applied until permanently deformed or fractured is called a... |
Stress and strain test. |
|
|
Opposite to stress and strain |
Compression |
|
|
A time independent elastic behavior |
Anelasticity |
|
|
When Stress is no longer proportional to the strain. The material is in permanent and none recoverable form it is called... |
Plastic Deformation |
|
|
strength when plastic deformation occurs is called
|
Yield strenght (Yielding) |
|
|
Stress at the maximum on the engineering stress-strain is called... |
Tensile Strength (TS) |
|
|
Measure of the degree of plastic deformation that has been sustained at the fracture. Hint:(Opposite to brittle)
|
Ductibility |
|
|
Capacity to absorb energy when deformed elastically is called |
Resilience |
|
|
Ability of the material to absorb energy up to fracture. |
Toughness |
|
|
Fraction of the total deformation recovered as elastic strained is called... |
Elastic recovery |
|
|
Measure of material's resistance to localized plastic deformation is called... (Hint: Like small dents or scratches)
|
Hardness |
