• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/56

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

56 Cards in this Set

  • Front
  • Back
charge
positive and negative charge

current runs in opposite direction of electrons

charge = q (units of coulombs C)

it is quantized, which means any charge must be at least as large as certain smallest unit

smallest unit of charge, e = 1.6e-19 C = charge of 1 electron or proton

opposite charges attract each other, like charges repel each other
universal law of conservation of charge
universe has zero net charge

net charge is created by separating electrons from protons

anytime a positive charge is created, a negative charge is created as well
Coulomb's law
formula describing magnitude of force of repulsion or attraction between 2 charged objects

analogous to gravitation force formula

F = kq1q2/r^2
k: coulomb constant = 8.988e9
q: respective charges
r: distance between centers of charge

force due to gravity is negligible compared to force due to charge
center of charge
point from which charge generated by object or system can be considered to originate
field
man-made concept designed to explain action at a distance

forces created by fields can act at a distance
lines of force
can represent any field

lines point in direction of field

positive to negative for electric field

towards the mass creating the field for gravitational fields

relative distance between lines indicate strength of field

closer the lines, the stronger the field

lines of force can never intersect

no lines of forces inside a uniformly charged sphere
electric field (E)
electrostatic force per unit charge

vector point in direction of field

units of N/C or V/m
electric field of point charge
E = kq1/r^2

system of point charges:
summing (vector addition) of each electric field for each charge
force on charge in electric field
F = Eq
F: force
E: electric field
q: charge
potential energy (U) of charge in electric field
U = Eqd
U: potential energy
E: electric field
q: charge
d: displacement
electric potential energy
U = kq1q2/r
U: electric potential energy
k: coulomb constant
q: charge
r: distance between charges
voltage (V)
potential of the field

potential for work by an electric field in moving any charge from 1 point to another

V = Ed
V: voltage (volts, V), scalar or J/C
E: electric field
d: displacement
voltage due to point charge
V = kq1/r

voltage due to group of point charges:
voltage due to each individual charge is summed directly
work due to electric field
W = mgh

W = qEd
equipotential surfaces
all points are same voltage

surface normal to field that describes set of points all with same potential
electric dipole
created by 2 opposite charges with equal magnitude
conductors
allow electrons to flow relatively freely

good conductors of electricity, poor resistors

such as metals
resistors
poor conductors

hold electrons tightly in place

such as: networks solids such as diamond and glass
induction
ability to charge a conductor because of easy flow of electrons

1. if negatively charged object is moved close to electrically insulated conductor, electrons on conductor will repel to opposite side
2. touch conductor with 2nd conductor, electrons will repel further and move to 2nd conductor
3. remove 2nd conductor, 1st conductor has less electrons than protons (induced positive charge)
current
moving charge

given in amps (A) or C/s

scalar, flow in direction of movement of positive charge

because electrons were designated as negative charge, current created by flowing electrons is in opposite direction of flow of electrons

flow of electrons resembles fluid flow
circuit
cyclical pathway for moving charge
resistivity (p)
quantitative measure of property that all substances resist flow of charge
resistance (R)
quantitative measure of an object of a particular shape and size to resit flow of charge

measured in ohms
Ohm's law
product of resistance and current

V = IR
V: voltage (gh)
I: current
R: resistance
Kirchoff's 1st rule
amount of current flowing into a node must be same amount that flows out

rate at which fluid flows into an intersection much match rate at which fluid flows out
node
any intersection of wires
kirchoff's second rule
voltage around any path in a circuit must sum to zero
electromotive force (EMF)
not a force, but instead voltage provided by battery
capacitor
used to temporarily store energy in a circuit

stores it in the form of separated charges
parallel plate capacitor
2 plates made from conductive material are separated by a very small distance

on a charged capacitor, 1 plate holds positive charge and the other holds same amount of negative charge

separation of charge creates electric field that is constant
capacitance
ability to store charge per unit voltage

something with high capacitance can store a lot of charge at low voltage

C = Q/V
C: capacitance
Q: charge of plate
V: votlage
energy stored by capacitor
U = 1/2QV
U = 1/2CV^2
U = 1/2Q^2/C
U: energy stored
Q: charge
V: voltage
C: capacitance
dielectric constant (K)
refers to substance between plates of capacitor

substance must be an insulator, otherwise it would conduct electrons from 1 plate to the other, not allowing any build up of charge

acts to resist creation of electric field, allowing capacitor to store more charge (greater capacitance)

higher K means greater capacitance
Kvacuum = 1

limits value of possible voltage across plates, at max voltage K will breakdown and conduct electricity

work is done on K and energy is stored in K
Series
components lined up in row, like train cars

any 2 components not separated by a node
parallel
single components in alternate paths connecting same node
resistor in series
total resistance (effective resistance, Reff) is sum of resistances

Reff = R1 + R2 + R3 + ...
Resistor in parallel
1/Reff = 1/R1 + 1/R2 + 1/R3 + ...
Capacitors in series
1/Ceff = 1/C1 + 1/C2 + 1/C3 +...
Capacitors in parallel
Ceff = C1 + C2 + C3 + ...
Power
same quality as mechanical power

P = IV
P = I^2R
P = V^2/R
P: power
I: current
V: voltage
R: resistance

rate at which heat is generated by current as it flows through resistor is equal to power dissipated
Direct current (DC current)
net movement of electrons is in one direction around circuit
Alternating current (AC current)
created by oscillating electrons back and forth in simple harmonic motion

voltage or current can be described by sine wave

since movement of electrons creates power regardless of direction, electrons do not have to be driven in one direction

current commonly used in home outlets
Max current
occurs when electrons are at max velocity

Imax = square root (2Irms)
Imax: max current
Irms: root mean square current
Max voltage
Vmax = square root (2Vrms)
Vmax: max voltage
Vrms: root mean square voltage
RMS
root mean square

square root of average of squares

square all terms, take average, then take square root

average value of sine wave = 0

Vrms = 120V --> Vmax = 170V
magnetic fields (B)
generated by moving charge, which experiences force when moving through a magnetic field

similarities to electric fields, measured in units of Telsa (T)

north and south poles; like poles repel and opposite poles attract, poles never exist separately

can be represented by lines of force, point from N to S pole (earth's magnetic field points in opposite direction)

created by changing electric field, thus changing magnetic field creates electric field

stationary charge doesn't create magnetic field but a moving charge (current) does
Right hand rule (RHR)
predicts direction of magnetic field due to current carrying wire

thumb: direction of current
fingers: grab wire, direction in which fingers wrap around wire is direction of magnetic field
force experience by charge moving through magnetic field
F = qvBsin0 = mv^2/r (find radius of curvature)
F: force
q: charge
v: velocity
B: magnetic field
0: angle between magnetic field and velocity

force is directed perpendicularly to both velocity and magnetic field, therefore does not work, leaving only 2 possible directions for force

RHR
thumb: direction of moving positive charge
fingers: direction of magnetic field
palm: direction of force
negative charge reverses direction of force
Faraday's law of induction
a changing magnetic flux induces an EMF (E) and a current, which creates an induced magnetic field

forces due to induced electric field (EMF) are nonconservative, thus mechanical energy is transferred to internal energy
Lenz's law
induced current will create a magnetic field opposing induced magnetic field
electric fields due to point charge equations
F = kq1q2/r^2

U = kq1q2/r

E = kq1/r^2

V = kq1/r
constant electric fields equations
F = Eq

U = qEd = Fd = Vq

V = Ed
Resistors equations
V = IR

P = IV
P = I^2R
P = V^2/R

Series:
Reff = R1 + R2 +...

Parallel:
1/Reff = 1/R1 + 1/R2 +...
Capacitors equations
C = Q/V

U = (1/2)QV
U = (1/2)Q^2/C
U = (1/2)CV^2

Series:
1/Ceff = 1/C1 + 1/C2 +...

Parallel:
Ceff = C1 + C2 +...
AC current equations
Vmax = square root (2Vrms)

Imax = square root (2Irms)
magnetism equations
F = qvBsin0