Lab Equipment

Front 1

Vacuum former

Back 1

An appliance used to warn plastic and construct custom trays

Front 2

Lab handpiece

Back 2

Used to adjust trim and smooth prosthetic and orthodontic apploances

Front 3

Lathe

Back 3

Used to polish debtures partials and temporaries

Front 4

Thermaknife

Back 4

Used to trim plastic bleach trays mouth guards

Front 5

Vibrator

Back 5

Removes air ib gypsum mixes and reduce voids in dental cast

Front 6

Model trimmer

Back 6

Used to grind and shape all types of dental models

Front 7

Eye wash station

Back 7

Used to flush eyes with water when contaminated

Front 8

28-day cold sterile

Back 8

Used to sterilize instruments thay can not be put into the auto clave

Front 9

Ultrasonic cleaner

Back 9

Appliance ised to remove debris fron instruments in preperation for stralization

Front 10

Autoclave

Back 10

Used to sterilize instruments quickly

Front 11

Automatic processor

Back 11

Automates all film processing steps transports unwrapped

Front 12

Control panel

Back 12

Has settings that can be adjusted according to the patients size and the film size

Front 13

Postion indicator

Back 13

A device on the x ray tubes head that aims the the x ray beam

Front 14

Lead apron

Back 14

Protective device used to sheild patients from excess radiation

Front 15

Panoramic machine

Back 15

A 2d dental x ray examination that captures the entire mouth

Front 16

Central vacuum system

Back 16

Provides the compressed air needed to operate air driven handpieces

Front 17

Central air compressor

Back 17

Provides the compressed air needed to operate air driven handpieces and the air water syringe

Front 18

Main trap

Back 18

Catches debris from each dental unit that is not caught in the dental until trap

Front 19

Patient chair

Back 19

Center of all clinicql activity

Front 20

Chair control

Back 20

Adjusts the patient chair and is covered with protective barrier during procedures

Front 21

Over head light

Back 21

Provides ligjt to illuminate the oral cavity

Front 22

Operatory chair

Back 22

Dentist chair

Front 23

Assistant chair

Back 23

Has a footrest and extended arm

Front 24

High speee handpiece

Back 24

Accepts friction grop burs and is used to cut tooth structure

Front 25

Operatory trap

Back 25

Catches debris drawn from the mouth

Front 26

Friction grip bur

Back 26

Used high speed handpiece

Front 27

Slow speed motor

Back 27

Is used with slow speed attachments

Front 28

Slow speed handpiece straight

Back 28

Attaches to the slow speed motor used outside the mouth and in the lab tp hold rotary instruments

Front 29

Lab burs

Back 29

Used in lab handpiece and slow speed straight attachment

Front 30

Mandrel

Back 30

Used in lab handpiece and slow speed straight attachment

Front 31

Sandpaper disc

Back 31

Typically attached to the end of mandrels either by a snap on or a screw type debice

Front 32

Slow speed handpiece

Back 32

Attaches tp the slow speed motor used intraorally to remove decay and tooth tissue to refine cavity

Front 33

Latch type bur

Back 33

Used in contra angle handpiece attachment

Front 34

Slow speed right

Back 34

Attaches to the slow speed motor used intraorally to polish teeth and restorations

Front 35

Rheostat

Back 35

A round disk shaped foot operated power control that conrtols thebspeed of the handpieces attached

Front 36

Dental unit

Back 36

Provides the electrical and air operated componenta needed to utilize the air water syringe

Front 37

Curing light

Back 37

Used to cure light cured dental materials

Front 38

Amalgamator

Back 38

A device for combining mercury with a metal or an alloy to form a new alloy to mix dental amalgam

Front 39

X ray view box

Back 39

Used to read and diagnose x rays