Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
16 Cards in this Set
- Front
- Back
|
What was the original motherboard speed of the ATX board? |
100 MHz |
|
|
Which bus architecture supports 32-bit/64-bit cards and transfers information at 33 MHz? |
PCI
|
|
|
Which motherboard component is responsible for charging the CMOS RAM so that CMOS can maintain its data? |
Battery |
|
|
How many pins does a standard IDE controller have? |
40 pins |
|
|
Which of the following best describes a Baby AT motherboard?Uses slot 1/ Runs at 100 MHz/ The only I/O port is a keyboard port on the back. /Incorporates AGP |
The only I/O port is a keyboard port on the back. |
|
|
How many devices are supported in a USB chain? |
127 |
|
|
How many pins does a standard floppy drive controller have? |
34 pins |
|
|
Which of the following video cards would be the better performing video card to purchase? |
PCIe x16 |
|
|
What type of cache memory was originally found on the motherboard and is now integrated into the processor? |
L2 |
|
|
Which type of memory module supports 32-bit data chunks? |
SIMM |
|
|
What is the bus architecture used in laptop computers? |
PCMCIA |
|
|
Which of the following best describes AGP? |
AGP slots have a direct path to the processor to help increase performance of AGP devices. |
|
|
Which PCMCIA card type is used for modems? |
Type II |
|
|
Which port is typically used for a modem? |
COM1 |
|
|
When connecting a floppy drive to the system, which end of the ribbon cable connects to the floppy drive? |
The end with a twist |
|
|
What are the labels given to the power connectors that supply power to the motherboard? |
P1 and P2 |
