Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
21 Cards in this Set
- Front
- Back
What seven things can you automate in flying faders?
|
1LF,
2LF Cut, 3SF Cut, 4CH Cut, 5 Insert in/out, 6 EQ in/out, 7 Cut A/B Busses, |
|
What are two things to do before turning on automation?
|
1 Clear Mix Memory
2 Check Auto Mode |
|
What are the 3 Modes of Automation?
|
Record, Safe, Isolate.
|
|
What does each mode do? record, save, isolate
|
Record: Write & Playback
Save: PlaybacK Only Isolate: No write, no play |
|
What are the 3 Statuses of the fader?
|
Relative, Replace, Auto Match
|
|
What does each status do?
|
Relative: the default status for record
Replace: rewrites/overwrite previous automation Automatch: Auto return to null point when finger is removed from fader. |
|
What are the 3 ways to turn on automation?
|
1.Pull down mix menu, select Run On
2. Click in "OFF" box so it says RUN in red. 3. Press Run switch in master section. |
|
Keys: How do you Toggle thru passes? Mixes?
|
Passes: + and - . Mixes: Hold Shift + and -
|
|
What is mix 1 pass 1 also called? What is the purpose?
|
Preset. Purpose: to record all null points and on/off status of all switches.
|
|
When is a new pass created?
|
When a new event is created.
|
|
When is a new mix created?
|
If you go back and edit a previous pass.
|
|
How do you setup a recall?
|
hit large Recall button., select client, then project,
then hit LIST button for list page: STORE> Name> "type in name"> EXEC Select from list page, hit small recall button to start viewing recall data |
|
How do you start the recall? End it?
|
Goto I/O that you want to start from and press LF SOLO (Colored = incorrect). End recall: Press cancel 2x to goto FF Top level Menu or Press large recall button and press Y for Yes and return to FF
|
|
FF Menu: What 3 things are contained in Client info? Where is it under in the menu?
|
1. Client Name, 2 Project name,3 song title. SYSTEM menu
|
|
FF Menu: What 5 things are contained in the Load Mix options. Where is it located in the menu?
|
1TC Offsets,
2Reassign Channels, 3Coalesce Groups, 4Clear RAM, 5Mix Pass Box. Location: MIX Menu |
|
FF Menu: What is Trim Faders? What are the 2 ways to trim faders. Where is it located in the menu?
|
1. Numeric Trim: typing in dB value.
2. Nudge Trim: by dB values. MIX Menu |
|
FF Menu: What is Merge CH Data for? Where is it located in the menus?
|
Enter mix/pass of source and destination, also start/end time (must be same source and destination)- creates a new mix/pass. MIX menu
|
|
FF Menu: What is Copy CH Data for? Where is it located in the menus?
|
To move data to a different point in time. MIX menu
|
|
FF Menu: What is Glide Times? Where is it located in the menus?
|
match/automatch return to null time; defaults to 1 frame, can be set up to 999 frames. OPTIONS menu
|
|
FF Menu: What are the 4 TC Options? Where is it located in the menus?
|
30 fps drop (29.97fps for films), 30 fps (for music) non-drop, 24fps, 25 fps
|
|
FF Menu: What is Coalesce Groups? Where is it located in the menus?
|
Moves auto data from master to slaves and separates group.
|