Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
the wax pattern casting process that we discussed is called
|
investment casting
|
|
the casting process where dry sand is used for the mold material is called
|
full mold casting or lost foam casting
|
|
to make a hollow casting, a core is often used. name two different casting processes that don't use a core to make a hollow casting.
|
slush casting and centrifugal casting and lost foam casting
|
|
the pressure casting process where the material to be cast is melted away from the casting machine is called
|
cold chamber die casting
|
|
all die casting processes have a mold that is considered
|
permanent
|
|
the pattern for shell molding is considered as
|
permanent
|
|
arrange the following processes in order of decreasing min thickness for an allowable casting section
|
DIGP 4,3,2,1
Die casting, Investment, Green sand, Permanent mold |
|
a cast iron pipe is made by the process called
|
centrifugal casting
|
|
name three different casting processes that are considered as sand casting processes
|
green sand casting
shell molding lost foam casting |
|
name three of the permanent mold casting processes
|
hot chamber die casting
cold chamber die casting centrifugal casting |
|
all sand casting processes have a mold that's considered as
|
expendable (unit)
|
|
the ceramic casting process we discussed has a
|
expendable (unit) mold
|
|
green sand consists of moisture plus
|
clay and sand
|