Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
What does the registration unit do?
|
It holds a sheet of paper in the same position.
|
|
What must be adjusted to change the feeder when changing to a heavier weight of paper?
|
Pile Height Regulator
|
|
What is used to test the pH of a fountain solution?
|
Litmus Paper
|
|
What is the procedure that introduces air between the sheets of paper prior to loading them in the feeder?
|
Fanning
|
|
What is the device that eliminates printed sheets from sticking together or smudging?
|
Offset Spray Attachment
|
|
What delivery system allows many sheets to be stacked?
|
Chain Gripper Delivery System
|
|
What does the term 'jogging' mean?
|
squaring and aligning the sheets of paper prior to loading it onto the feed table
|
|
Before starting any maintenance on the offset duplicator, always remove the:
|
power
|
|
The roller that moves side to side to maintain an even distribution of duplicator fountain solution
|
oscillating
|
|
What must be adjusted to make a press/duplicator feed properly?
|
Vacuum and blower
|
|
The offset duplicator system that holds the paper after it is printed
|
delivery
|
|
What are blower tubes, sheet separators, and sucker feet designed to do?
|
Separate one sheet from the feed table
|
|
What holds a sheet of paper in one position?
|
Registration unit
|
|
The cylinder that the clean up mat is attached to:
|
plate
|
|
When the air blast nozzles on a duplicator are set correctly, they will:
|
separate the top 6-8 sheets in the feeder
|
|
What does spray powder help prevent?
|
Setoff
|
|
The offset duplicator system that sends paper into the press is called the
|
feeder
|
|
The cylinder that is adjusted to provide the pressure needed to transfer the image from the blanket to the paper
|
impression
|
|
The device that prevents feeding more than one sheet of paper into the press:
|
double sheet detector
|
|
The device that pulls the sheet from the sucker tubes and delivers it to the register system
|
pull out roller
|