Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
29 Cards in this Set
- Front
- Back
|
how many sheets should the sheet register send at a time
|
1 sheet
|
|
|
1 sheet is the amountt of sheets that should be fed through the _______ ______
|
sheet register
|
|
|
this makes sure each sheet is square
|
sheet register
|
|
|
the sheet register makes sure that
|
each sheet is square
|
|
|
how many guides are there for front guides
|
two front guides
|
|
|
where are the two front guides located
|
outside edge
|
|
|
the outside edge is where the ______ guides are
|
front
|
|
|
for the sheet detector the paper must all arrive____
|
On time
|
|
|
the paper can never arrive ______ for sheet detector
|
late
|
|
|
Sheet detectors determine _____ and _____ on pressa
|
time and position
|
|
|
the time and position on press is a part of _____ _______
|
sheet dectectors
|
|
|
Sides guides always pull sheets to the ________ side
|
common
|
|
|
the sheets being pulled to the common side is of what guide______
|
side guide
|
|
|
side guides help assure all sheets go in
|
same position
|
|
|
indeed helps ______ paper into ______
|
move paper into press
|
|
|
this helps make sure all papers are in sync
|
in feed section
|
|
|
this grabs the sheet into the press
|
grippers
|
|
|
grippers do what to the paper
|
grab and pull the sheet
|
|
|
what should you do with grippers to make sure they are correct
|
adjust to caliper of paper
|
|
|
always adjust the ______ of the gripers to the caliper of paper for ________
|
caliper ,grippers
|
|
|
grippers need ______ across the cylinder
|
tension
|
|
|
tension is needed for ______ across the cylinder
|
grippers
|
|
|
how dow does the paper travel through the presss
|
cylinders
|
|
|
cylinders is how paper travels through
|
the press
|
|
|
perfecting is when
|
both sides get printed on in one pass
|
|
|
when both sides get printed in one pass it is known as
|
perfecting
|
|
|
the paper going through the press and getting flipped is called
|
perfecting
|
|
|
after what unit does the machine begin perfecting
|
1st unit
|
|
|
the 1st unit is where the ______ begins
|
perfecting
|
