Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
99 Cards in this Set
- Front
- Back
|
M00 |
Compulsory Stop |
|
|
M01 |
Optional Stop |
|
|
M02 |
End of Program |
|
|
M03 |
Spindle on (clockwise rotation) |
|
|
M04 |
Spindle on (counter clockwise) |
|
|
M05 |
Spindle stop |
|
|
M06 |
Automatic Tool change |
|
|
M07 |
Coolant on (mist) |
|
|
M08 |
Coolant on (flood) |
|
|
M09 |
Coolant off |
|
|
M10 |
Pallet clamp on |
|
|
M11 |
Pallet clamp off |
|
|
M13 |
Spindle on (clockwise rotation) and coolant on (flood) |
|
|
M19 |
Spindle orientation |
|
|
M21 |
Mirror, X-Axis--or-- tailstock forward |
|
|
M22 |
Mirror, Y-axis--or--Tailstock Backward |
|
|
M23 |
Mirror Off --or-- thread gradual pullout ON |
|
|
M24 |
Thread Gradual pullout OFF |
|
|
M30 |
End of Program, with return to program top |
|
|
M41 |
Gear select - gear 1 |
|
|
M42 |
Gear select - gear 2 |
|
|
M43 |
Gear select - gear 3 |
|
|
M44 |
Gear select - gear 4 |
|
|
M48 |
Feed rate override allowed |
|
|
M49 |
Feedrate override NOT allowed |
|
|
M52 |
Unload last tool from spindle |
|
|
M60 |
Automatic pallet change (APC) |
|
|
M98 |
Subprogram call |
|
|
M99 |
Subprogram end |
|
|
G00 |
Rapid positioning |
|
|
G01 |
Linear interpolation |
|
|
G02 |
Circular interpolation, clockwise |
|
|
G03 |
Circular interpolation, counter clockwise |
|
|
G04 |
Dwell |
|
|
G05P1000 |
High Precision Contour Control (HPCC) |
|
|
G05.1.Q1. |
AI Advanced preview control |
|
|
G06.1 |
Non-Uniform Rational B Spline Machining |
|
|
G07 |
Imaginary axis designation |
|
|
G09 |
Exact stop check, non-modal |
|
|
G10 |
Programmable data input |
|
|
G11 |
Data write cancel |
|
|
G12 |
Full circle interpolation, clockwise |
|
|
G13 |
Full circle interpolation, counterclockwise |
|
|
G17 |
XY Plane selection |
|
|
G18 |
ZX Plane selection |
|
|
G19 |
YZ Plane Selection |
|
|
G20 |
Programming in inches |
|
|
G21 |
Programming in millimeters (mm) |
|
|
G28 |
Return to home position (machine zero, aka machine reference point) |
|
|
G31 |
Skip function (used for probes and tool length measurement systems) |
|
|
G32 |
Single-point threading, longhand style (if not using a cycle, e.g., G76) |
|
|
G33 |
Constant-pitchthreading--or-- Single-point threading, longhand style (if not using a cycle, e.g., G76) |
|
|
G34 |
Variable-pitchthreading |
|
|
G40 |
Tool radius compensation OFF |
|
|
G41 |
Tool radius compensation LEFT |
|
|
G42 |
Tool Radius compensation RIGHT |
|
|
G43 |
Tool height offset compensation negative (Tool Length Compensation) |
|
|
G44 |
Tool height offset compensation positive |
|
|
G45 |
Axis offset single increase |
|
|
G46 |
Axis offset single decrease |
|
|
G47 |
Axis offset double increase |
|
|
G48 |
Axis offset double decrease |
|
|
G49 |
Tool length offset compensation cancel |
|
|
G50 |
Scaling function cancel--or--define the maximum spindle speed--or--Position register (programming of vector from part zero to tool tip) |
|
|
G52 |
Local coordinate system (LCS) |
|
|
G53 |
Machine coordinate system |
|
|
G54 to G59 |
Work Coordinate Systems (WCSs) |
|
|
G54.1 P1 to P48 |
Extended Work Coordinate Systems |
|
|
G61 |
Exact stop check, modal |
|
|
G62 |
Automatic Corner Override |
|
|
G64 |
Default cutting mode (cancel exact stop check mode) |
|
|
G70 |
Fixed cycle, multiple repetitive cycle,for finishing (including contours) |
|
|
G71 |
Fixed cycle multiple repetitive cycle, for roughing (z-axis emphasis) |
|
|
G72 |
Fixed cycle, multiple repetitive cycle, for roughing ( x-axis emphasis ) |
|
|
G73 |
Fixed cycle, multiple repetitive cycle, for roughing, with pattern repetition--or-- Peck drilling cycle for milling - high speed - (NO full retraction from pecks) |
|
|
G74 |
Peck drilling cycle for turning--or-- Tapping cycle for milling, lefthand thread,M04 spindle direction |
|
|
G75 |
Peck Grooving cycle for turning |
|
|
G76 |
Fine boring cycle for milling--or--threading cycle for turning, multiple repetitive cycle |
|
|
G80 |
Cancel canned cycle |
|
|
G81 |
Simple drilling cycle |
|
|
G82 |
Drilling cycle with dwell |
|
|
G83 |
Peck drilling cycle (FULL retraction from pecks) |
|
|
G84 |
Tapping cycle, right hand thread, M03 Spindle direction |
|
|
G84.2 |
Tapping cycle, right hand thread, M03 Spindle direction, rigid toolholder |
|
|
G84.3 |
Tapping cycle, lefthand thread, M04 spindle direction, rigid toolholder |
|
|
G85 |
Boring cycle, feed in/ feed out |
|
|
G86 |
Boring cycle, feed in/spindle stop/rapid out |
|
|
G87 |
Boring cycle, backboring |
|
|
G88 |
Boring cycle, feed in /spindle stop/ manual operation |
|
|
G89 |
Boring cycle, feed in /dwell/Feed out |
|
|
G90 |
Absolute programming --or-- fixed cycle, simple cycle, for roughing (Z-axis emphasis) |
|
|
G91 |
Incremental Programming |
|
|
G92 |
Position register (programming of vector from part zero to tool tip) --or-- threading Cycle,simple cycle |
|
|
G94 |
Feedrate per minute --or-- Fixed cycle, simple cycle, for roughing ( x-axis emphasis) |
|
|
G95 |
Feedrate per revolution |
|
|
G96 |
Constant surface speed (CSS) |
|
|
G97 |
Constant spindle speed |
|
|
G98 |
Return to initial Z level in canned cycle--or-- Feedrate per minute (group type A) |
|
|
G99 |
Return to R Level in canned cycle --or-- Feedrate per Revolution (Group Type A) |
