Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
38 Cards in this Set
- Front
- Back
What is the purpose of the G00 code? |
The G00 code is for positioning the cutting tool |
|
What is the purpose of the G01 code? |
The G01 code is for Linear interpolation (straight cuts) |
|
What is the purpose of the G02 code? |
G02 is used for clockwise circular interpolation |
|
What is the purpose of the g03 code |
the g03 code is used for counter clockwise interpolation |
|
What is the line of safety gcodes at the start of a code? |
G17 G20 G40 G49 G80 G90 |
|
g40 |
cutter compensation cancel |
|
g41 |
cutter compensation left |
|
g42 |
cutter compensation right |
|
g80 |
canned cycle cancel |
|
G81 |
Basic Drill Cycle |
|
G82 |
spotface/countersink cycle |
|
G83 |
Peck Drill Cycle (Deep drilling dawwg) |
|
G84 |
Tapping Cycle (R/H) |
|
G85 |
Boring Cycle |
|
G90 |
Absolute Programing |
|
G91 |
Incremental Programming |
|
G98 |
Return to I level canned cycle |
|
G99 |
Return to R level Canned Cycle |
|
M00 |
Program Stop |
|
M01 |
Optional Stop |
|
m02 |
End of Program |
|
M03 |
Clockwise Spindle Rotation |
|
M04 |
Counter Clockwise Spindle Rotation |
|
M05 |
Spindle Stopq |
|
M06 |
Tool Change |
|
M08 |
Coolant Pump On |
|
M09 |
Coolant Pump OFF
|
|
M30 |
End of Ta[e (yeah I have no clue either) |
|
How many M codes can you put in a single block? |
One |
|
How many Gcodes can be put in a single block? |
Multiple, granted that they are compatible with one another
|
|
What is the Starting block need for every code? |
Program# Programmer Machine Class Date |
|
Dwell |
P |
|
Feed |
F |
|
Tool |
T |
|
Preparatory Function |
G codes |
|
Offset number |
D |
|
Spindle Speed |
S |
|
Arc values |
I and J |