Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
18 Cards in this Set
- Front
- Back
What technique of provisional is preferred, prefabricated or custom?
|
custom
|
|
What is the main defining factor for using custom or pre-fabricated provisional?
|
can you take impression of good tooth
|
|
If you can't take an impression of a good tooth, can you do a custom provisional?
|
yes - with a custom shell
|
|
cellulose acetate or poly propylene are 2 examples of what?
|
clear vacuum formed carrierrs for provisionals
|
|
3 methods of capturing the internal surface form of preps for a provisional are...
|
direct
indirect direct/indirect |
|
Which method of capturing internal surface form is for FPDs?
|
Indirect or indirect/direct
|
|
Which method of capturing internal surface form is for FPDs and large units?
|
indirect/direct
|
|
Which method of capturing internal surface form is not for single tooth only?
|
direct
|
|
How do you do a indirect/direct capture of interal surface form for a provisional?
|
you make a thin shell from a minimally prepared stone cast
then reline at chair w/ resin for pt |
|
If you're going to make a repair, and you need to reline, what must you add?
|
a vent hole
|
|
Considerations for repairing provisionals....
____is easiest _____is difficult and better to remake _____must be CLEANED |
PMMA
bis-acryl resin |
|
4 types of provisionals
|
PMMA - JeT
bis acryl - integrity Poly R - methacrylate (SNAP) light cured - triad |
|
what type of provisional is this?
good all around, shrinks and stinks exothermic reaction easy polished easy repair |
PMMA
|
|
PMMA...
2 good things 3 bad things |
easy polish, easy repair
shrink stink exothermic |
|
Poly R methacrylates
2 bad 2 good |
bad - smell, less strength
good - less shrink, not as exothermic |
|
bis-acryl
4 good? 3 bad? |
good -
automix less shrink repairable (flowable) low heat of poly Bad -expnsive brittle -not easy to repair |
|
Light cured
good? bad? |
not much good, but light cure on demand
Bad - need a translucent carrier only |
|
Cements
2 options, what's more common? |
zn eugenol or non-eugenol
non is more common |