Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
32 Cards in this Set
- Front
- Back
Fire Suppression System
Whats are the three basic classes of fire suppression systems used in the GMLS community? |
Carbon-dioxide (CO2) systems, water injection systems and dry type sprinkler systems
|
|
Fire Suppression System
How are CO2 systems used? |
Primarily to combat electrical fires.
|
|
Fire Suppression System
What is the design of water injection systems? |
To direct a continuous stream of water into the exhaust nozzle of rocket motor.
|
|
Fire Suppression System
How are sprinkler systems designed? |
To spray water onto the missiles, magazine storage and handling areas of a GMLS.
|
|
Fire Suppression System
What are the primary pneumatic mechanical components of a simple CO2 system? |
The thermal pneumatic control elements and supply cylinder.
|
|
Fire Suppression System
What is the design of the HSDs in the CO2 system? |
A spring-loaded rubber bellow housed in a mashed style cage.
|
|
Fire Suppression System
Why is a fusible link element used in the HSD? |
In the events in a smoldering type of fire where slow-rise and space temperature is not quick enough to trip and activate the system
|
|
Fire Suppression System
The fusible link in the GMLS CO2 system is designed to melt at what temperature? |
160 degrees F plus or minus 3 degrees
|
|
Fire Suppression System
What is circle seal check valve? |
A brass spring-load check valve?
|
|
Fire Suppression System
What is the correct way to install a circuit check valve? |
With its directional arrow pointing towards the control head.
|
|
Fire Suppression System
What composes a pneumatic control head? |
An air chamber with a diaphragm
|
|
Fire Suppression System
How is a typical water-injection system activated should a missile accidentally ignite? |
by blast pressure
|
|
Fire Suppression System
Why is fresh water used in the water-injection system? |
Because it doesn't promote corrosion as quickly as salt water.
|
|
Fire Suppression System
What is the concept of a dry type sprinkler system? |
The piping of the outlet side of the main sprinkler control valve up to the sprinkler heads contains no water at a normal or ready state, so the piping remains dry until the system is activated.
|
|
Fire Suppression System
What style is the transmission line tubing in the automatic control dry type sprinkler system? |
1/8 inch OD rockbesto style
|
|
Fire Suppression System
What is the primary purpose of the orifices that are drilled through the flat middle plates in the hydrolic system of the dry type sprinkler? |
To prevent a build-up of salt water back pressure in a control system piping.
|
|
Fire Suppression System
What is the secondary purpose of the orifices that are drilled through the flat middle plates in the hydrolic system of the dry type sprinkler? |
To vent operating pressure from the hydrolic control system when is return to auto or neutral.
|
|
Fire Suppression System
What is the minimum fire-main pressure required to raise or lift the upper diaphragm in the bonnet chamber of the main sprinkler control valve? |
40 PSI
|
|
Fire Suppression System
What is the first step when the sprinkler system must be secured? |
The remote control valve handle and lever are squeezed and turned to "closed".
|
|
Magazines
What does the primary magazine accommodate? |
A vessel's complete allowance of ammunition for peace time operation.
|
|
Magazines
Who is the custodian of all magazine keys? |
The Commanding Officer
|
|
Magazines
What is the primary source of magazine inspection criterion? |
The appropriate MRC.
|
|
Magazines
What is the main purpose of daily magazine inspection? |
To check and record space temperatures.
|
|
Magazines
What is an exhaust ventilator in an ammunition magazine? |
A pipe with a check valve that permits a pressure release.
|
|
Magazines
Why is the hydrolic control system installed? |
To permit rapid actuation of the dry type magazine sprinkler system.
|
|
Magazines
What is the purpose of the spring-loaded lift check valves? |
To permit the control system to be operated from more than one control station by preventing back flow through the other stations
|
|
Ammunition Handling and Safety
Where are the basic guidelines for various handling operations found? |
SORM
|
|
Ammunition Handling and Safety
When may live ammunition and explosives be loaded or discharged from a ship or a lighter at night? |
Only in a emergency or when required by the vessel sailing schedule, or when authorized by NAVSEASYSCOM
|
|
Ammunition Handling and Safety
What is the most common fork-lift truck? |
The standard fork-lift truck, type EE code 1370
|
|
Ammunition Handling and Safety
What is a cargo-handling box (skip box) made of? |
Wood, except for the iron corners and stiffeners
|
|
Ammunition Handling and Safety
Slings are most commonly used for moving what types of gun ammunition? |
Marks 85, 86, 87 and 100
|
|
Ammunition Handling and Safety
How are the different versions of pallet slings easily identified? |
By the color coded tubing attached to the crossed bridal.
|