• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/57

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

57 Cards in this Set

  • Front
  • Back

Fire protection and extinguishing is provided for what areas?

Engines
APU
Forward and Aft Baggage Compartments
Lavatory
The Fire Protection Panel (FPP) allows for control of what?
1. Engine Fire Extinguishing

2. APU Fire Extinguishing

3. Forward and Aft baggage compartment extinguishing

1. Engine Fire Extinguishing
2. APU Fire Extinguishing
3. Forward and Aft baggage compartment extinguishing

Is there any indication in the cockpit when the lavatory smoke detector activates?

No

Only the flight attendants receive notification on the three (3) flight attendant "Advisory Panel" on the cabin overhead panels. A red annuciator will illuminate on all three panels.

Engine fire "Detection" is provided for by how many fire loops?
Three (3) on each engine.
What are the names of the engine fire detection loops?
Leading Edge Zone (LEZ)
Primary Engine Zone (PEZ)
Main Wheel Well Zone (WWZ)
How many protection loops protect the APU compartment?
Only one (1)
What does each fire detection loop contain to sense a failed loop?
An "Integrity" switch
At what times will the "Integrity Switch" for the fire detection loops indicate a fault?
1. The loop is punctured (looses pressure).
2. Electrical power failure to the loop.
If a "fault" is sensed within one of the fire detection loops, which caution and warning lights are illuminated?
Master Warning / Chime

"CHECK FIRE DETECT" warning light.

"Fault A" or "Fault B" caution lights.
What is indicated if the "Fault A" caution light illuminates for the Fire Protection System?
It indicates either a failure in the Primary Engine Zone (PEZ) loop or the Leading Edge Zone (LEZ) loop within the engine compartment.

It indicates either a failure in the Primary Engine Zone (PEZ) loop or the Leading Edge Zone (LEZ) loop within the engine compartment.

What is indicated if the "Fault B" caution light illuminates for the Fire Protection System?
It indicates a fault in the "Main Wheel Well" (MWW) zone fire detection loop.

It indicates a fault in the "Main Wheel Well" (MWW) zone fire detection loop.

If the Primary Engine Zone loop (PEZ) fails "and" the Leading Edge Zone loop (LEZ) detects a fire, what indication occurs?
Both a Fault A "and" a fire warning will result.

Remember:

- If the Primary Engine Zone (PEZ) fails you will get "both" warnings!
If the Leading Edge Zone (LEZ) loop fails and the Primary Engine Zone (PEZ) loop detects a fire, what is indicated?
Only a "Fault A" is indicated!
How many warning lights are associated with an engine fire?

Five (5)

What are the five warning lights associated with an engine fire?

1. Master Warning


2. "CHECK FIRE DETECT"


3. Both "ENGINE FIRE - PRESS TO RESET" switchlights on the glareshield


4. "PULL FUEL/HYD OFF" T-Handle


When an engine fire is detected, how can the warning tone be silenced?

By pressing either "ENGINE FIRE - PRESS TO RESET" switchlight on the glareshield.

By pressing either "ENGINE FIRE - PRESS TO RESET" switchlight on the glareshield.

How many fire extinguisher bottles are dedicated for the engines use?

Two (2)

Where are the fire extinguisher bottles located for the engines?
Installed in the "Left wing root".
How are the fire extinguisher bottles for the engines use named?
Forward Bottle and Aft Bottle
Is it possible to fire both engine fire extinguisher bottles into a single engine?
Yes
What indication is there if one of the engines fire extinguisher bottles pressure becomes low?
There is a single "BTL LOW" caution light displayed.

This will occur if "either" engine fire bottles pressure becomes low!
What will occur if the "PULL FUEL/HYD OFF" T-Handle is pulled?
1. The Emergency Fuel Shutoff Valve will close.
2. The Emergency Hydraulic Shutoff Valve will close.
3. Both fire extinguisher bottles are "ARMED" to fire into that engine.
How can you verify that the Emergency Fuel Shutoff Valve has closed after pulling the T-Handle?
The "white" FUEL VALVE CLOSED light on the FPP will illuminate.
"AND"
The "green" OPEN light will extinguish.
How can you verify that the Emergency Hydraulic Shutoff Valve has closed after pulling the T-Handle?
The "white" HYD VALVE CLOSED light will illuminate on the FPP.

"AND"

The "green" OPEN light will extinguish.

The "white" HYD VALVE CLOSED light will illuminate on the FPP.
"AND"
The "green" OPEN light will extinguish.

How can you verify that the engine fire extinguisher bottles have "ARMED" to discharge?
By illumination of "both" the amber "ARMED" indicator lights next to the bottle select switch.

By illumination of "both" the amber "ARMED" indicator lights next to the bottle select switch.

How can the fire bottles be discharged into the engine compartment?
Select the appropriate "T - Handle" to arm the bottles to fire.

By selecting the "spring loaded switch" on the FPP to the "AFT BTL" or the "FWD BTL" position.
When the fire extinguisher bottles for the engines are selected to discharge, what actually happens?
An electrical signal activates an explosive device which will rupture a disc on the squib and release the Halon agent.
What is indicated if the fire bottles "ARM" caution light fails to illuminate after the T-Handle is pulled?
Either there is a "squib malfunction"
"or"
The bottle pressure is low. The "BTL LOW" caution light on the FPP will be illuminated if "either" fire bottle is low!
At what times is the Engine Fire Detection System tested?
Prior to the first flight of the day.
How is the engine fire detection system tested?
By holding a spring loaded "TEST DETECTION" switch on the FPP to the Left (Engine #1) or Right (Engine #2) position.

By holding a spring loaded "TEST DETECTION" switch on the FPP to the Left (Engine #1) or Right (Engine #2) position.

What will illuminate if the engine fire test switch is held to the "Left" or the "Right" position?

1. Master Warning
2. "CHECK FIRE DET" illuminates.
3. Both "ENGINE FIRE - PRESS TO RESET" switchlights illuminate.
4. Associated "PULL FUEL/HYD OFF" T-Handle will illuminate.
5. Associated "FAULT A" and "FAULT B" caution lights illuminate.
6. Fire warning tone is heard.

When conducting the "Engine Fire Warning Test", how can the warning tone be silenced?
By pressing either "ENGINE FIRE - PRESS TO RESET" switchlight.
How can the pressure be checked on all the "portable" fire extinguisher bottles?
Each portable fire extinguisher bottle has a pressure gauge on the nozzle.
The "portable" fire extinguisher bottles pressure gauge has three colors indicating the pressure status. What are the colors and what do they mean?
GREEN: Serviceable Range
YELLOW: Over charged
RED: Re-Charge Range

How many smoke detectors are there on the aircraft and where are their locations?

Four (4)

- One (1) is above the door in the Forward Baggage Compartment
- Two (2) are located in the ceiling of the Aft Baggage Compartment
- One (1) is in the lavatory ceiling
Which smoke detectors are monitored from the flight deck?

Only the FWD and AFT baggage compartment detectors.

How is the lavatory smoke detector monitored?

Only from the flight attendant's three (3) "Advisory Panels" in the cabin (overhead). A red annuciator light will illuminate on all three panels.

What will occur if smoke is detected in the "Forward Baggage Compartment"?

1. Master Warning light and chime.

2. "SMOKE" warning light illuminates.

3. Baggage "FWD SMOKE/EXT" switchlight will illuminate on the FPP.

4. FWD Fire bottle "ARM" (amber) light on FPP illuminates.

1. Master Warning light and chime.
2. "SMOKE" warning light illuminates.
3. Baggage "FWD SMOKE/EXT" switchlight will illuminate on the FPP.
4. FWD Fire bottle "ARM" (amber) light on FPP illuminates.

What does the baggage compartments FWD or AFT fire bottle "ARM" light indicate when illuminated?
That the "High Rate" bottle is armed to discharge in the indicated baggage compartment!

That the "High Rate" bottle is armed to discharge in the indicated baggage compartment!

What is indicated in the picture?

What is indicated in the picture?

- The Aft Baggage compartment's "High Rate" bottle was ARMED.


- The "High Rate" bottle pressure is low (5).


- The "Low Rate" bottle pressure is low (6).

What is indicated in the picture?

What is indicated in the picture?

- The Fwd Baggage compartment's "High Rate" bottle is "ARMED".


- The "High Rate" bottle pressure is low (3).


- The "Low Rate" bottle pressure is low (2).

What will occur if smoke is detected in the "AFT Baggage Compartment"?
1. Master Warning light and chime.
2. "SMOKE" warning light illuminates.
3. Baggage "AFT SMOKE/EXT" switchlight will illuminate.
4. AFT Fire bottle "ARM" (amber) light on FPP illuminates.
5. "VENT INLT CLOSED" and "VENT OTLT CLOSED" advisory lights (white) illuminate.
How many fire extinguisher bottles are installed in the "Forward" baggage compartment?
One (1) "High Rate" bottle

It is installed in the ceiling of the baggage compartment.
What occurs when the "FWD SMOKE/EXTG" pushbutton is pushed on the baggage compartment section of the FPP?
It will fire the forward baggage compartments "High Rate" fire bottle and the shared "Low Rate" fire bottle at the same time.



The "LOW" caution for the forward baggage compartment bottle indicators will illuminate approx. 45 minutes later ind...

It will fire the forward baggage compartments "High Rate" fire bottle and the shared "Low Rate" fire bottle at the same time.

The "LOW" caution for the forward baggage compartment bottle indicators will illuminate approx. 45 minutes later indicating that the "Low Rate" bottle has depleted.

When the FWD baggage compartments fire bottle is activated ... how long until you will receive the Fire Bottle FWD "LOW" (amber) light on the FPP?
It should illuminate approximately 45 minutes later to indicate that the "shared" low pressure bottle is also depleted.
How many fire extinguisher bottles are "physically" located in the AFT baggage compartment?
Two (2)

One (1) "High Rate" bottle and one (1) shared "Low Rate" bottle.

The High Rate bottle is mounted above the ceiling of the aft baggage compartment.
What occurs when the "AFT SMOKE/EXTG" pushbutton is pushed on the baggage compartment section of the FPP?
It will discharge the aft baggage compartments "High Rate" fire extinguisher bottle.



The "Low Rate" fire extinguisher bottle will automatically discharge approximately 7 minutes later.

It will discharge the aft baggage compartments "High Rate" fire extinguisher bottle.

The "Low Rate" fire extinguisher bottle will automatically discharge approximately 7 minutes later.

How can you "TEST" the forward baggage compartment smoke detector?
By pressing the black "BAGGAGE FWD" test button on the Fire Protection Panel.

By pressing the black "BAGGAGE FWD" test button on the Fire Protection Panel.

When the "BAGGAGE FWD TEST" button is pressed for the baggage compartment smoke detector, an OK test will illuminate which warning/advisory lights?
1. Master Warning
2. "SMOKE" warning
3. "SMOKE/EXTG" switchlight on baggage section of the FPP
4. Forward bottle "ARM" caution light on the FPP

NOTE:
"CHECK FIRE DET" does not illuminate for the baggage smoke detection system!
How may the two (2) smoke detectors in the AFT baggage compartment be tested?
By selecting the AFT Baggage "TEST" toggle switch to the Test 1 and Test 2 positions.



This test both smoke detectors individually!

By selecting the AFT Baggage "TEST" toggle switch to the Test 1 and Test 2 positions.

This test both smoke detectors individually!

When the "BAGGAGE AFT TEST 1/2" toggle is selected for the aft baggage compartment smoke detectors, a satisfactory test will illuminate which warning/advisory lights?
1. Master Warning

2. "SMOKE" warning

3. "SMOKE/EXTG" switchlight

4. AFT bottle "ARM" caution light

5. "VENT INLT CLOSED" (amber) advisory light

6. "VENT OTLT CLOSED" (amber) advisory light



Note:

If the "Low Rate" bottle has lost p...

1. Master Warning
2. "SMOKE" warning
3. "SMOKE/EXTG" switchlight
4. AFT bottle "ARM" caution light
5. "VENT INLT CLOSED" (amber) advisory light
6. "VENT OTLT CLOSED" (amber) advisory light

Note:
If the "Low Rate" bottle has lost pressure, the Fire Bottle FWD "LOW" and the Fire Bottle AFT "LOW" caution lights will also illuminate during the test.

How many smoke detectors are there in the lavatory?
Only one (1) mounted in the ceiling above the waste bin.
What will occur if the lavatory smoke detector senses smoke?
1. Audible alarm tone is heard through PA in the cabin.
2. Repeater light will illuminate on the flight attendant's advisory panel.
How is fire protection provided for in the lavatory waste bin?
By a single "dedicated" fire bottle mounted under the shelf above the waste bin.
What will cause the lavatory fire bottle to discharge into the waste bin?
Heat will cause the fusible seals to melt and release the agent.
What indications will appear when the "TEST" button is pressed on the lavatory smoke detector?
1. A red "LED" light will illuminate on the smoke detector unit.
2. An audible aural tone is heard through the cabin PA system.
3. All cabin repeater lights will illuminate.
How is a "failure" of the smoke detector test for the lavatory indicated?
No response will come from the smoke detector when the "TEST" button is depressed.