Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
45 Cards in this Set
- Front
- Back
what color is the silicone carbide blade
|
Yellow, masonry blade
|
|
how many teeth must be missing to put ops
|
8
|
|
what's the circumference of the carbide blades to go ops
|
8in
|
|
what are the back slaps to start go shutdown ?
|
1 slap stop, 2 cut 3 shutdown
|
|
how long will partner saw run on full tank of gas mixture
|
20-30 minutes
|
|
what's the maximum width the lobster tool can cut
|
5/8ths of an inch
|
|
can the rebar cutter cut case hardened steal
|
No
|
|
can you operate lobster tool In explosive atmosphere
|
No
|
|
ko curtain
|
26.5 lbs, 8x6ft, 15ft long fireproof ropes, 3/8th inch diameter. Inspected weekly during mud and after each use. Contact the division for replacement.
|
|
when deployed the ko curtain will decrease the temp?
|
50%
|
|
can the ko curtain be deployed for drill?
|
No under no circumstances
|
|
ko training curtain
|
Black vinyl with yellow x,8x6, 20 lbs, stored in a black bag with the top two feet painted white training. I selected after each use at drill.
|
|
fire window blanket
|
10x12, 40lbs, silica cloth alumnized, big enough to cover 2 windows.
|
|
who can deploy the fire blanket?
|
Anyone can deploy it. A spotter is designated by the ic outside the building. Squad and rescue floor above team bring there's to the floor above.
|
|
what is the fire blanket stored in?
|
White vinyl bag
|
|
training window blanket is in what color bag?
|
Red vinyl bag labeled training
|
|
what parts of the partner saw can we fix?
|
Spark plugs, blades, refuel tank, adjust belt, clean exterior of saw and change air filter
|
|
what are the pressures at the three different sized tips for the Akron multiversal?
|
11/4 tip 100, 11/2 tip 70, 2in 50.
|
|
when tying knots on the multitude versal do you secure the knots before or after the hose line is connected?
|
Secure knots before the supply line is connected
|
|
spikes on bottom of the multiversalust be inspected after each use and changed or sharpened when they exceed ?
|
1/16 in in diameter
|
|
when multiversal is in the portable position it can be operated at
|
Limited to 90 degrees, when truck mounted it can go 15 degrees below the horizontal to 90 above. Safety pin must be pulled to go below 35deg
|
|
what's the max psi multiversal can be operated at ?
|
200psi
|
|
whatever the tonnage that an airbag is rated it will lift that weight how high
|
1 inch
|
|
when should the cylinder be changed out for the airbag?
|
At 200 psi
|
|
what type of cylinder is used to operate the air bags?
|
Only steel scba cylinders may be used
|
|
what's the max internal air pressure for the air bag?
|
118 psi. Safety relief valve prevents it from going over
|
|
can the cylinder be changed during operations for the airbags
|
Yes it can just make sure all valves are closed
|
|
when 2 bags are used witch bags tonnage is the one you use?
|
The smaller of the 2 bags is the max tonnage used
|
|
the lifting capability is reduced by 50% to obtain max lift
|
30 ton bag with max lift of 10in will lift 30 tons 1 inch. But will lift 15 tons 10 inches
|
|
how much should bags be inflated to?
|
Half to 3/4s of there rated capacity to avoid a pillorying effect
|
|
what's the average lifespan of airbags?
|
10 years depending on air pollutants not usage
|
|
how far does the hydra ram extend per stroke
|
3/4 of an inch
|
|
what's the max opening of the hydra ram?
|
4 inches
|
|
what's the max force of the hydra ram?
|
10,000 lbs.
|
|
what's the max force of the hydra ram?
|
10,000 lbs.
|
|
what's the weight and length of the hydra ram?
|
12lbs 13 inches long
|
|
what's then main purpose of the hydra ram?
|
Force entry of I ward opening doors as well as the side of a vehicle good or trunk
|
|
can the hydra ram be used under water?
|
Yes
|
|
can you strike the hydra ram with a tool to gain purchase?
|
No
|
|
how do you test for leaks in te hydra ram?
|
Fully extend arm, it should not be able to move except for when relief valve is pressed
|
|
how do you test for leaks in te hydra ram?
|
Fully extend arm, it should not be able to move except for when relief valve is pressed
|
|
the hydra ram shall be cleansed
|
With soap and water including pistons then lubricated with 3 in 1 oil
|
|
how much does the positive pressure fan weigh?
|
155lbs
|
|
what's the run time of the positive pressure fan on a full tank of gas?
|
2-3 he's on full throttle
|
|
the sure search door marker is an indicator of what?
|
A primary search in progress or they were completed and you can move on to another room
|