Related Essays

  • Stepper Motor Reflection

    Table ‎2-2; Motor and Gearbox Rotation Specification Motor Gearbox Step Angle (Degrees) 1.8 0.11 Torque (Nm) 8.34 133 4.2.2 Motor and Gearbox Assembly...

  • JEDR Report Conclusion

    ω TB = P_B/ω_B = (75,000 W)/(784.31 RPM) x (1 rev)/(2π rad) x 60 s = 913.16 Nm TA = 913.16 x (784.31 RPM)/(261.44 RPM) = 2739.45 Nm TMotor = 2739.45 x (261....

  • Electro Mechanical Actuator Case Study

    1.1 Rotary Electro-mechanical Actuator Gearbox Requirements: The Gear Box at the Motor Output is intended to amplify the torque output of the Motor with red...

  • Hybrid Electric Vehicle Case Study

    The rotor is to be rotated by the electrical energy being supplied to the stator with this rotation being transferred through a drive shaft to a driven gear....

  • Ergonomics: Human Engineering, Human Factors

    Some of the rotors that are assembled on the rotating side includes the LPT (low pressure turbine), HPT (high pressure turbine), blade up, Compressor, fan an...

  • Royal Enfield Case Study

    The Eicher gathering is one of the India's driving car bunches with expanded hobbies in the assembling of tractors, business Vehicles, Automotive Gears, Expo...

  • Boeing 777 Essay

    It should operate routinely on a fast-paced schedule with high mechanical reliability, minimum down-time and operate

  • Compare And Contrast Stroke And Two Stroke Engine

    Parts of a 2 Stroke Engine | eHow. [online] eHow. Available at: http://www.ehow.com/about_5393868_parts-stroke-engine.html [Accessed 3 Dec.

  • 1.1 Explain The Typical Axis Conventions Of The Following Machine Tool

    The type of drive are 1. Gear drive (n.d.) The transmission of power is done through gears. The gear are always in contact it consist of complex gear...

  • Lima Tire Plant Case Study

    One of the problem areas at the Lima Plant has been its continuous operation for 24 hours. After the Greenville, South Carolina, plant shut down in 2006, th...

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/7

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

7 Cards in this Set

  • Front
  • Back
How many degrees is the the main rotor mast tilted?
5 degrees forward
The main rotor rotational speed:
265 RPM
Engine output shafts turn at what speed?
23,000 RPM
Main Transmission accessories rotational speeds are?
Alternators 11683 RPM
Hydraulic pumps 4602 RPM
Oil cooling fan 8472 RPM
How is the main transmission mounted?
By 3 suspension bars and a flexible mounting plate on the bottom of the transmission.
What is the MGB run dry capability?
52 minutes.
How many lubrication systems does the MGB have?
3;
One Main
One Standby
One Emergency