Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
8 Cards in this Set
- Front
- Back
|
101.1 - STATE THE GENERAL SAFETY PRECAUTIONS THAT MUST BE OBSERVED WHILE PRESSURE REFUELING ABOARD SHIP WITH ROTORS ENGAGED
|
1. SECURE A/C WITH 4 CHAINS AND 2 CHOCKS.
2. FUELING SHALL BE SECURED WHEN ANY FUEL SPILLAGE IS NOTED. 3. FUEL HOSE SHALL BE CONNECTED AND DISCONNECTED WITH NO PRESSURE ON THE HOSE. |
|
|
101.2 - STATE AND IDENTIFY THE SH-60F/HH-60H DANGER AREAS.
|
1. ENGINE INTAKES AND EXHAUST
2. APU AND ECS EXHAUST 3. MRB WHILE TURNING(CAN DROOP TO WITHIN 5 FT. OF GROUND 4. AFT FUSELAGE WHILE BLADES ARE TURNING 5. KEEP CLEAR OF PYLON WHILE FOLDING 6. CHAFF DISPENSER 7. ALQ-144 SEVERERE BURNS COULD RESULT. |
|
|
101.3 - DISCUSS THE HAZARD AND SAFETY PRECAUTIONS FOR:
1. BERYLLIUM 2. LITHIUM BATTERIES |
1. BERYLLIUM DUST AND FINE PARTICLES ARE TOXIC IF INHALED OR ALLOWED TO CONTACT SKIN. SEVERE POISONING CAN RESULT IF INHALED.
2. LITHIUM BATTERY FAILURE CAN RESULT IN RELEASE OF SULFUR DIOXIDE GAS WHICH DEPLETES OXYGEN IN A/C CABIN. |
|
|
101.4 - WHAT ARE THE BASIC REQUIREMENTS FOR RESPIRATORY PROTECTION?
|
1. PROVIDE A CENTRAL FACILITY STAFFED TO ISSUE RESPIRATORY PROTECTION EQUIMENT.
2. PROVIDE STANDARD OPERATING PROCEDURES GOVERNING SELECTION, CARE, ISSUE, AND USE OF RESPIRATORS. 3. TRAINING FOR ALL EMPLOYEES AND SUPERVISORS USING SUCH EQUIPMENT. 4. MEDICAL EVALUATIONS TO ENSURE PERSONNEL ARE PHYSICALLY ABLE TO PERFORM TASK USING RESPIRATOR. 5. QUANTITATIVE FIT TESTING FOR NEGATIVE PRESSURE. |
|
|
101.4 - WHAT ARE THE BASIC REQUIREMENTS FOR HEARING CONSERVATION?
|
1. SURVEY TO IDENTIFY POTENTIAL HAZARDOUS NOISE LEVELS.
2. ENVIRONMENT THAT PROVIDE HAZARDOUS NOISE LEVELS SHOULD, IF POSSIBLE, REDUCE NOISE LEVELS TO ACCEPTABLE LEVELS. |
|
|
101.4 - WHAT ARE THE BASIC REQUIREMENTS FOR SIGHT CONSERVATION?
|
ELIMINATE OR REDUCE TO MINIMUM, WORK RELATED SIGHT IMPAIRMENT.
|
|
|
101.5 - STATE THE WARNING TO OVBSERVE PRIOR TO APPLYING EXTERNAL POWER.
|
1. BEFORE APPLYING POWER, BE SURE AREA AROUND STABILATOR IS CLEAR.
2. DO NOT CONNECT OR DISCONNECT A/C POWER CABLE WHILE ENERGIZED, DUE TO POSSIBLE SHOCK HAZARD. 3. BE SURE WEIGHT ON WHEELS CIRCUIT BREAKER IS CLOSED. 4. ALL SWITCHES ARE OFF, SAFE, OR NORMAL. |
|
|
101.6 - DISCUSS THE PROPER USE OF HANDHOLDS, AND WALKWAYS.
|
TO PREVENT INJURY AND DAMAGE TO A/C, WALK ONLY ON SURFACES DESIGNED AS WALKWAYS. ALL OTHER AREAS ARE "NO STEP."
|
