Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
- 3rd side (hint)
|
Single Process going Lighter |
5 segments. Begin in back, work from bottom up. 1/4 inch horizontal sections. Apply 1/2 inch away from scalp to ends. Process 10 minutes. Remix & apply color to scalp and ends. Outline segments. Process 35 minutes for permanent results. Rinse until water turns clear. |
|
|
|
Single Process going Darker |
Part into 5 segments. Outline all 5 segments. Begin application in back segments. 1/4 inch horizontal sections in back, vertical on sides & mohawk. Apply to scalp through the ends. And both sides. Process according to instructions. Rinse until water runs clear. |
|
|
|
Tint Retouch |
Part hair into 5 segments. Outline all 5 segments. Begin in back. 1/4 inch horizontal sections in back, 1/4 inch vertical sections on sides and Mohawk. Apply formula to the new growth. Apply to both sides. Refresh mid-shaft, ends, and then process. Rinse until water runs clear. |
|
|
|
Double Process (for virgin hair) |
Part hair into 5 segments. 1/8 inch horizontal sections in back, 1/8 inch vertical sections on side & Mohawk. Apply 1/2-1 inch from scalp to the ends. Apply to both sides. Place cotton strip @ the scalp in between each section. Lighten to 50-70% of desired result. Remove cotton. Outline segments beginning in back. Apply to scalp and ends. Process to desired lightness. Rinse with cool water & shampoo according to instructions and tone. |
You use cotton strips. |
|
|
Double Process Retouch |
Part hair into 5 segments. Outline segments being worked on. Begin in back segments. 1/8 inch horizontal sections in back, 1/8 inch vertical sections on sides and Mohawk. Apply from scalp to 1/16th inch away from line of demarcation. Process to desired lightness. Rinse with cool water, shampoo, and tone. |
|
|
|
Highlift Virgin Application |
Part hair into 5 segments. Begin application in back segments. 1/4 inch horizontal sections in the back, 1/4 inch vertical sections on sides and Mohawk. Apply 1/2 inch from scalp to the ends. Apply to both sides. Process for 20 minutes. Mix fresh color. Outline segments being worked on. Begin in back and apply to scalp and ends. Process additional 45 minutes. Rinse until water runs clear. |
Additional 45 minutes to process after color is put on. |
|
|
Highlift Retouch |
Part hair into 5 segments. Outline all 5 segments. Begin application in back. 1/4 inch horizontal sections in back, 1/4 inch vertical on sides and Mohawk. Apply from scalp to line of demarcation. Apply to both sides. Process for 45 minutes. Rinse until water runs clear. |
Processes for 45 minutes. |
|
|
Horizontal Weave |
Foil on dry hair. Part hair into 6 panels. Begin at the center back section. 1/4 inch sections, weave off the top half, leave the bottom. Weave using a 1:2 ratio, leaving double amount of space between each weave. Work from lower sides in sideburns until parallel with side/back area. Include hairline in weave. Lock the foils at hairline, crown, center part, and sideburn areas. Work back and forth up side to the center part. Weave the "box" panel in the crown last. |
|
|
|
Diagonal Slice |
Foil on dry hair. Part hair into 6 panels. Begin in either back panel, then do sides, and finish on the top panel. Take 1/4 inch horizontal/diagonal sections and skim 30-40% off the top. Weave and lock the first 2 foils in hair line, sideburn area, and crown. Divide section in half if it's wider than 2 inches. |
|
|
|
How to place and fold a foil (no lock) |
Place a 1/8 inch fold at base of slice or weave. Secure foil and hair with thumb. Apply product at mid-shaft. Place hand under foil as a platform. Apply products through ends. Secure top corners using thumb and index finger. "Tap" product up to the foil. Fold foil in half and gently pinch the fold. Using a comb, fold bottom and 2 sides. |
|
