Study your flashcards anywhere!

Download the official Cram app for free >

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

A key: Read text to speech.a key

image

Play button

image

Play button

image

Progress

1/17

Click to flip

17 Cards in this Set

  • Front
  • Back
Which Layer 4 protocol does EIGRP use to provide reliability for the transmission of routing information?

DUAL
IP
PDM
RTP
TCP
UDP
RTP
Which of the following statements describes the bounded updates used by EIGRP?
--
Bounded updates are sent to all routers within an autonomous system.

Partial updates are sent only to routers that need the information.

The updates are sent to all routers in the routing table.

Updates are bounded by the routers in the topology table.
Partial updates are sent only to routers that need the information.
What is the EIGRP term for a backup route?
--
backup route
default route
feasible successor route
gateway
secondary route
successor route
feasible successor route
Why would it be necessary to configure the bandwidth setting on an EIGRP interface rather than leaving it at the default setting? (Choose two.)
--
1. A suboptimal route may be chosen as the best path to a destination if the bandwidth setting is higher than the actual bandwidth of the link.

2. The network may be unable to converge if the bandwidth setting does not match the actual bandwidth of the link.

3. Routing updates might arrive too fast for the interface to handle and be discarded because of buffer overflow.

4. The configured bandwidth must match the actual speed of the link so the link will operate properly.

5. Setting the bandwidth to a higher rate will optimize the effective throughput of the link.
1. A suboptimal route may be chosen as the best path to a destination if the bandwidth setting is higher than the actual bandwidth of the link.

2. The network may be unable to converge if the bandwidth setting does not match the actual bandwidth of the link.
If an EIGRP route goes down and a feasible successor is not found in the topology table, how does DUAL flag the route that has failed?
--
recomputed
passive
active
down
unreachable
successor
active
What tables does EIGRP maintain for each routed protocol it supports? (Choose three.)
--
adjacency table
topology table
neighbor table
routing table
link state table
ARP table
1. topology table

2. neighbor table

3. routing table
In which of the following tables does the EIGRP DUAL algorithm store the primary route to a destination? (Choose two.)
--
routing
topology
neighbor
path
shortest path
1. routing

2. topology
Which of the following are found in the EIGRP neighbor table? (Choose two.)
--
1. routes installed by DUAL

2.lowest calculated metric to each destination

3.network layer address of the neighbor routers

4. number of EIGRP packets waiting to be sent

5. feasible distance to each neighbor
1. network layer address of the neighbor routers

2. number of EIGRP packets waiting to be sent
Which of the following router commands is recommended only for troubleshooting specific types of network problems, not for monitoring normal network operation?
--
show
list
debug
terminal monitor
debug
Which EIGRP command is used to view all routes that are known by the router?
--
1. show ip eigrp interfaces detail

2. show ip eigrp traffic

3. show ip eigrp neighbors

4. show ip eigrp topology all-links
show ip eigrp topology all-links
What is the default administrative distance of EIGRP internal routes?
90
What is the advantage of routers forming adjacencies when using EIGRP? (Choose three.)
--
1. Neighbor routers can quickly take over for a router that is in passive mode.

2. New routers and their routes can quickly be discovered by neighbor routers.

3. A router can share routing loads with neighbor routers.

4. A router can quickly discover when a neighbor router is no longer available.

5. Changes in network topology can quickly be shared with neighbor routers.

6. Neighbor routers can save overhead by sharing their DUAL databases.
1. New routers and their routes can quickly be discovered by neighbor routers.

2. A router can quickly discover when a neighbor router is no longer available.

3. Changes in network topology can quickly be shared with neighbor routers.
Which of the following types of routes will be denoted by EX in EIGRP routing table entries? (Choose two.)
--
1. routes learned from other routing protocols

2. routes learned from any non-adjacent EIGRP routers

3. any route with a hop count metric higher than 224

4. EIGRP routes that originate in different autonomous systems

5. all passive routes in the routing table
1. routes learned from other routing protocols

2. EIGRP routes that originate in different autonomous systems
Which command will help identify established OSPF neighbor adjacencies?
--
1. router# show ospf neighbor

2. router# debug neighbor events

3. router# debug ip ospf neighbor

4. router# show ip ospf neighbor
router# show ip ospf neighbor
Which command will display only the current EIGRP routing table entries?
--
1. Router# show ip route

2. Router# show ip route eigrp

3. Router# show eigrp route

4. Router# show eigrp protocol
Router# show ip route eigrp
Host 192.168.1.66 in the network illustrated is unable to ping host 192.168.1.130. How must EIGRP be configured to enable connectivity between the two hosts? (Choose two.)
1. R1(config-router)# no auto-summary

2. R2(config-router)# no auto-summary
What information is maintained in the EIGRP topology database for a destination route? (Choose three.)
--
1. the routing protocol

2. the feasible distance of the route

3. the highest cost of the route

4. the SRTT value for the route

5. the route cost as advertised by the neighboring router

6. the physical address of the gateway interface
1. the routing protocol

2. the feasible distance of the route

3. the route cost as advertised by the neighboring router