Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
9 Cards in this Set
- Front
- Back
aerial placement is critical because
|
aerial devices have a fixed maximum length |
|
placement of an aerial apparatus must consider
|
aerial objective, placement of turntable, scene conditions, proper stabilization |
|
when two aerials respond to the same location the first goes to the front of the building, the second goes to |
the rear or side, depending on building access |
|
area beneath a wall in which the wall is likely to land if it loses structural integrity |
collapse zone
|
|
the proper distance between the object and the aerial apparatus is the distance that affords
|
maximum stability, best climbing angle, adequate extension |
|
______ extensions at ________angles place the maximum amount of stress on an aerial device |
long, low |
|
positioning the apparatus for utmost efficiency on the fire ground |
spotting |
|
spotting factors |
grade windy conditions overhead obstructions angle and aerial location of aerial operation special situations |
|
unattached metal pad that is larger than the area of the |
|