Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
21 Cards in this Set
- Front
- Back
- 3rd side (hint)
Glass |
Clean, clear, unobstructed and undamaged |
____, ____, ____, and ____ |
|
Bracket |
Secure and undamaged |
____ and ____ |
|
Rubber |
No bubbles, blisters, cuts, or dry rot |
No ____, ____, ____, or ____ ____ |
|
Belts |
No fraying, cracking, or splitting |
No ____, ____, or ____ |
|
Plastic |
Secure and undamaged |
____ and ____ |
|
Nuts and bolts |
Not loose |
Not ____ |
|
Wires |
Secure, no cuts or fraying |
____, no ____ or ____ |
|
Arrival |
1. Leave wheels straight 2. Set parking/spring brake 3. Chock service side duals 4. Take driver's license, permit, appointment slip, medical card, and vehicle registration 5. Check in at testing office |
5 steps, and step 4 has five parts. |
|
Starting inspection |
1. Key in hand and chock blocks in place, turn on headlights and 4 ways 2. Release spring brakes 3. Gather tools and exit bus 4. Shut door |
4 steps |
|
Mirror bracket |
Secure and undamaged |
____ and ____ |
|
Foot peg and hand hold |
Secure and undamaged |
____ and ____ |
|
Hood release |
Intact; no cuts or dry rot |
____; no ____ or ____ ____ |
|
Crossover mirror bracket |
Secure and undamaged |
____ and ____ |
|
Crossover mirror, headlight lens |
Clean, clear, unobstructed, and undamaged |
____, ____, ____, and ____ |
|
Bumper |
Secure and undamaged |
____ and ____ |
|
License plate |
Secure and appropriate stickers
*note last 3 numbers to match back plate* |
____ and ____ *________* |
|
Grill |
Secure; no broken pieces |
____; no ____ ____ |
|
Radiator fins |
Unobstructed and undented |
____ and ____ |
|
4 way lens |
Clean, clear, unobstructed, and undamaged |
____, ____, ____, and ____ |
|
When observing general appearance, look for... |
1. Leaning (can indicate suspension problem or flat tire) 2. Glass 3. Amber (warning) and red (stopping) lenses 4. Two legal stickers (DOT inspection, state inspection) - no illegal stickers 5. No hanging hoses or wires 6. Windshield wipers present and flush to windshield 7. No drips or puddles on ground |
7 steps |
|
At end of front inspection... |
1. Get into bus 2. Start engine 3. Turn wheels all the way left or right 4. (Depending on assignment) shut off bus, take key, and open hood |
4 steps |