• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/278

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

278 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)
As with a computer, a router or switch cannot function without an ______ system.
operating
The embedded software architecture in all of the Cisco routers is ______.
Cisco IOS
The network services of:
Basic routing and switching functions
Reliable and secure access to networked resources
Network scalability
are provided by the ______.
Cisco IOS
What is missing from this list of network services provided by the Cisco IOS?

1. ___________
2. Reliable and secure access to networked resources
3. Network scalability
Basic routing and switching functions
What is missing from this list of network services provided by the Cisco IOS?

1. Basic routing and switching functions
2. Reliable and secure access to networked resources
3. __________________
Network scalability
What is missing from this list of network services provided by the Cisco IOS?

1. Basic routing and switching functions
2. __________________
3. Network scalability
Reliable and secure access to networked resources
The operating system of the Catalyst switches is the ______.
Cisco IOS
What is a CLI?
Command Line Interface
Typically, the CLI is accessed through a ______ session.
console
A CLI session can also be accessed remotely through a dialup connection using a modem connected to the router ______ port.
AUX
To establish a Telnet session to the router, at least one interface must be configured with an IP address, and virtual ________ sessions must be configured for login and passwords.
terminal
To establish a Telnet session to the router, at least one ________ must be configured with an IP address, and virtual terminal sessions must be configured for login and passwords.
interface
To establish a Telnet session to the router, at least one interface must be configured with an ________, and virtual terminal sessions must be configured for login and passwords.
IP address
To establish a ______ session to the router, at least one interface must be configured with an IP address, and virtual terminal sessions must be configured for login and passwords.
Telnet
To configure a router interface, the user must enter ________ mode.
interface configuration
The IOS provides a command interpreter service known as the command executive which is also known as ______.
EXEC
In the IOS, after each command is entered, the ______ validates and executes the command.
EXEC
As a security feature the Cisco IOS software separates the EXEC sessions into ______ access levels.
two
(how many?)
The ______ mode is often referred to as a view only mode.
user EXEC
The user EXEC level does not allow any commands that might change the ______ of the router.
configuration
The user EXEC mode can be identified by the ______ prompt
>
The ______ mode provides access to all router commands.
privileged EXEC
The ______ mode can be configured to require a password.
privileged EXEC
True or False: The privileged EXEC mode can be configured to require a user ID.
true
Global configuration mode and all other more specific configuration modes can only be reached from the ______ mode.
privileged EXEC
The privileged EXEC mode can be identified by the ______ prompt
#
To access the ______ level from the user EXEC level, enter the enable command at the > prompt
privileged EXEC
To access the privileged EXEC level from the ______ level, enter the enable command at the > prompt
user EXEC
To access the privileged EXEC level from the user EXEC level, enter the ______ command at the > prompt
enable
To access the privileged EXEC level from the user EXEC level, enter the enable command at the ______ prompt
>
True or False: When a question mark, ?, is entered at the privileged EXEC level, it will show more command options than available at the user EXEC level.
true
True or False: When a question mark, ?, is entered at the privileged EXEC level, it will show less command options than available at the user EXEC level.
false
True or False: When a question mark, ?, is entered at the privileged EXEC level, it will show the same number of command options than available at the user EXEC level.
false
To leave privileged EXEC level and return to the user EXEC level, one can type "exit" or ______.
disable
To leave privileged EXEC level and return to the user EXEC level, one can type "disable" or ______.
exit
The naming convention for the different Cisco IOS releases contains ______ parts.
three
(how many?)
To find out the amount of flash memory, issue the ______ command.
show flash
To see the amount of RAM, issue the ______ command.
show version
Before installing a new Cisco IOS software image on the router, check to see if the router meets the ______ memory and flash requirements for that image.
RAM
What is missing from this listing of the three parts of what is contained in the naming convention for the different Cisco IOS releases?

1. _____________________
2. The special features supported in the image
3. Where the image runs and whether it has been zipped or compressed
The platform on which the image runs
What is missing from this listing of the three parts of what is contained in the naming convention for the different Cisco IOS releases?

1. The platform on which the image runs
2. ________________________
3. Where the image runs and whether it has been zipped or compressed
The special features supported in the image
What is missing from this listing of the three parts of what is contained in the naming convention for the different Cisco IOS releases?

1. The platform on which the image runs
2. The special features supported in the image
3. ___________________
Where the image runs and whether it has been zipped or compressed
One of the main considerations when selecting a new IOS image is compatibility with the router ______ and RAM memory.
flash
In general, the ______ the release and the more features that it provides, the more flash and RAM memory it requires.
newer
Specific IOS features can be selected using the Cisco _____ _________, which is available to registered Cisco.com users and is an interactive tool that provides the most current information and allows users to select options that meet network requirements.
Software Advisor
The Cisco Software ______ is an interactive tool that provides the most current information and allows users to select options that meet network requirements.
Advisor
Before installing a new Cisco IOS software image on the router, check to see if the router meets the ______ memory and flash requirements for that image.
RAM
Before installing a new Cisco ______ software image on the router, check to see if the router meets the RAM memory and flash requirements for that image.
IOS
To see the amount of RAM, issue the ______ command.
show version
One needs to add together the amounts of ______ and shared memory installed in the router to find the amount of DRAM installed on the router.
main
Some platforms use a fraction of ______ as shared memory.
DRAM
To find out the amount of flash memory, issue the ______ command
show flash
One needs to add together the amounts of main and ______ memory installed in the router to find the amount of DRAM installed on the router.
shared
One needs to add together the amounts of main and shared memory installed in the router to find the amount of ______ installed on the router.
DRAM
One needs to add together the amounts of main and shared ______ installed in the router to find the amount of DRAM installed on the router.
memory
The first part of a name for a Cisco IOS release stands for ______.
platform
The second (middle) part of a name for a Cisco IOS release stands for ______.
features
The third (far right) part of a name for a Cisco IOS release stands for ______.
format, location, compression
The Cisco IOS devices have three distinct operating environments or modes:
1. ROM monitor
2. ______
3. Cisco IOS
Boot ROM
The Cisco IOS devices have three distinct operating environments or modes:
1. ______
2. Boot ROM
3. Cisco IOS
ROM monitor
The Cisco IOS devices have three distinct operating environments or modes:
1. ROM monitor
2. Boot ROM
3. ______
Cisco IOS
The Cisco IOS devices have three distinct operating environments or ______:
1. ROM monitor
2. Boot ROM
3. Cisco IOS
modes
The Cisco IOS devices have three distinct operating ______ or modes:
1. ROM monitor
2. Boot ROM
3. Cisco IOS
environments
At startup, a Cisco router normally loads into RAM and executes an ______.
operating environment
A system administrator can use the ______ register setting to control the default startup mode for a router.
configuration
A system administrator can use the configuration register setting to control the default startup ______ for a router.
mode
The ROM monitor performs the bootstrap process, provides low-level functionality and diagnostics, is used to recover from system failures and to recover a lost ______.
password
The ROM monitor performs the ______ process and provides low-level functionality and diagnostics. It is used to recover from system failures and to recover a lost password.
bootstrap
The ______ monitor performs the bootstrap process, provides low-level functionality and diagnostics, is used to recover from system failures and to recover a lost password.
ROM
The ______ performs the bootstrap process, provides low-level functionality and diagnostics, is used to recover from system failures and to recover a lost password.
ROM monitor
The ROM monitor performs the bootstrap process, provides low-level functionality and ______, is used to recover from system failures and to recover a lost password.
diagnostics
The ROM monitor performs the bootstrap process, provides low-level functionality and diagnostics, is used to recover from ______ and to recover a lost password.
system failures
To see the IOS image and version that is running, use the ______ command, which also indicates the configuration register setting.
show version
True or False:
The ROM monitor can be accessed through any of the network interfaces.
false
True or False:
The ROM monitor can only be accessed by way of a direct, physical connection through the console port.
true
The ______ cannot be accessed through any of the network interfaces. It can only be accessed by way of a direct, physical connection through the console port.
ROM monitor
The ROM monitor can only be accessed by way of a direct, physical connection through the ______ port.
console
True or False:
When the router is running in boot ROM mode, only a limited subset of the Cisco IOS feature set is available.
true
True or False:
When the router is running in boot ROM mode, all commands of the Cisco IOS are available.
false
When the router is running in boot ______ mode, only a limited subset of the Cisco IOS feature set is available.
ROM
When the router is running in ______ ROM mode, only a limited subset of the Cisco IOS feature set is available.
boot
______ allows write operations to flash memory and is used primarily to replace the Cisco IOS image that is stored in flash.
Boot ROM
The Cisco IOS image can be modified in ______ with the copy tftp flash command.
boot ROM
The Cisco IOS image can be modified in boot ROM with the ______ command.
copy tftp flash
The ______ command copies an IOS image that is stored on a TFTP server into the flash memory of a router.
copy tftp flash
The copy tftp flash command copies an ______ that is stored on a TFTP server into the flash memory of a router.
IOS image
The copy tftp flash command copies an IOS image that is stored on a TFTP server into the ______ of a router.
flash memory
The copy tftp flash command copies an IOS image that is stored on a ______ into the flash memory of a router.
TFTP server
True or False:
The normal operation of a router requires use of the full Cisco IOS image as stored in flash.
true
True or False:
In some devices, the IOS is executed directly from flash.
true
Most Cisco routers require a copy of the IOS to be loaded into RAM and also executed from ______.
RAM
Most Cisco routers require a copy of the IOS to be loaded into ______ and also executed from RAM.
RAM
Some IOS images are stored in flash in a ______ format and have to be expanded when copied to RAM.
compressed
To see the IOS image and version that is running, use the ______ command.
show version
The ______ command indicates the configuration register setting.
show version
The ______ command is used to verify that the system has sufficient memory to load a new Cisco IOS image.
show flash
The ______ operating environment is used for normal operations.
Cisco IOS
The ______ operating environment is used in cases of failures or for password recovery.
ROM monitor
The ______ operating environment is used for a flash image upgrade.
Boot ROM
The prompt for the ROM monitor operating environment looks like ______.
> or ROMMON>
The prompt for the Boot ROM operating environment looks like ______.
Router(boot)>
The prompt for the Cisco IOS operating environment looks like ______.
Router>
A router initializes by loading the ______, the operating system, and a configuration file.
bootstrap
A router initializes by loading the bootstrap, the ______, and a configuration file.
operating system
A router initializes by loading the bootstrap, the operating system, and a ______.
configuration file
If the router cannot find a ______, it enters setup mode.
configuration file
If the router cannot find a configuration file, it enters ______ mode.
setup
Upon completion of the setup mode, a backup copy of the configuration file may be saved to ______.
NVRAM
The goal of the startup routines for Cisco IOS software is to ______.
start the router operations
To start the router operations the startup routines must accomplish the following:

1. __________________
2. Find and load the Cisco IOS software.
3. Find and apply the startup configuration file or enter the setup mode.
Verify that the router hardware is tested and functional.
To start the router operations the startup routines must accomplish the following:

1. Verify that the router hardware is tested and functional.
2. Find and load the Cisco IOS software.
3. __________________.
Find and apply the startup configuration file or enter the setup mode
To start the router operations the startup routines must accomplish the following:

1. Verify that the router hardware is tested and functional.
2. __________________.
3. Find and apply the startup configuration file or enter the setup mode.
Find and load the Cisco IOS software
To ____________ the startup routines must accomplish the following:

1. Verify that the router hardware is tested and functional.
2. Find and load the Cisco IOS software.
3. Find and apply the startup configuration file or enter the setup mode.
start the router operations
To start the router operations the ______ must accomplish the following:

1. Verify that the router hardware is tested and functional.
2. Find and load the Cisco IOS software.
3. Find and apply the startup configuration file or enter the setup mode.
startup routines
When a Cisco router powers up, it performs a ______.
power-on self test (POST)
During the POST, the router executes diagnostics from ROM on all ______ modules to verify the basic operation of the CPU, memory, and network interface ports.
hardware
During the POST, the router executes diagnostics from ROM on all hardware modules to verify the basic operation of the ______, memory, and network interface ports.
CPU
During the POST, the router executes diagnostics from ROM on all hardware modules to verify the basic operation of the CPU, ______, and network interface ports.
memory
During the POST, the router executes diagnostics from ROM on all hardware modules to verify the basic operation of the CPU, memory, and ______.
network interface ports
During the ______, the router executes diagnostics from ROM on all hardware modules to verify the basic operation of the CPU, memory, and network interface ports.
POST
After verifying the hardware functions, the router proceeds with ______.
software initialization
The first event to occur after the POST, as the router initializes is ____________.
The generic bootstrap loader in ROM executes.
A ______ is a simple set of instructions that tests hardware and initializes the IOS for operation.
bootstrap
A bootstrap is a simple set of instructions that tests hardware and ______ the IOS for operation.
initializes
The first event to occur after the POST, as the router initializes is the generic bootstrap loader in ROM executes. After this, The operating system image is ______.
located and loaded
The first event to occur after the POST, as the router initializes is the generic bootstrap loader in ROM executes. After this, The operating system image is ______ and loaded.
located
The first event to occur after the POST, as the router initializes is the generic bootstrap loader in ROM executes. After this, The ______ is located and loaded.
operating system image
When the IOS is loaded and operational, a listing of the available hardware and software components is sent to the ______.
console terminal screen
The first event to occur after the POST, as the router initializes is the generic bootstrap loader in ROM executes. After this, The operating system image is located and loaded.The ______ saved in NVRAM is then loaded into main memory and executed one line at a time.
configuration file
The first event to occur after the POST, as the router initializes is the generic bootstrap loader in ROM executes. After this, The operating system image is located and loaded.The configuration file saved in ______ is then loaded into main memory and executed one line at a time.
NVRAM
The first event to occur after the POST, as the router initializes is the generic bootstrap loader in ROM executes. After this, The operating system image is located and loaded.The configuration file saved in NVRAM is then loaded into ______ and executed one line at a time.
main memory
The configuration commands saved in the configuration file start ______, supply addresses for interfaces, and define other operating characteristics of the router.
routing processes
The configuration commands saved in the configuration file start routing processes, ______, and define other operating characteristics of the router.
supply addresses for interfaces
If no valid configuration file exists in NVRAM, the operating system searches for an available ______.
TFTP server
If no valid configuration file exists in ______, the operating system searches for an available TFTP server. If no TFTP server is found, the setup dialog is initiated.
NVRAM
If no valid configuration file exists in NVRAM, the operating system searches for an available TFTP server. If no ______ is found, the setup dialog is initiated.
TFTP server
If no valid configuration file exists in NVRAM, the operating system searches for an available TFTP server. If no TFTP server is found, the ______ dialog is initiated.
setup
True or False:
Setup mode is intended to be used to enter complex protocol features in a router.
false
The purpose of the setup mode is to permit administrators to install a ______ for routers when a configuration cannot be obtained from another source.
basic configuration
In the setup mode, ______ appear in square brackets [ ] following the question. Press the Enter key to use these defaults.
default answers
In the setup mode, default answers appear in ______ following the question. Press the Enter key to use these defaults.
square brackets [ ]
In the setup mode, default answers appear in square brackets [ ] following the question. Press the ______ key to use these defaults.
Enter
During the setup process, ______ can be pressed at any time to terminate the process.
Ctrl-C
During the setup process, Ctrl-C can be pressed at any time to ______ the process.
terminate
end
When the configuration process is completed in setup mode, the following options will be displayed:

1. ____________
2. [1] Return back to the setup without saving this config.
3. [2] Save this configuration to nvram and exit.
[0] Go to the IOS command prompt without saving this config.
When the configuration process is completed in setup mode, the following options will be displayed:

1. [0] Go to the IOS command prompt without saving this config.
2. [1] Return back to the setup without saving this config.
3. ____________
[2] Save this configuration to nvram and exit.
When the configuration process is completed in setup mode, the following options will be displayed:

1. [0] Go to the IOS command prompt without saving this config.
2. ____________
3. [2] Save this configuration to nvram and exit.
[1] Return back to the setup without saving this config.
Cisco routers use ______indicators to provide status information.
LED
A problem may be indicated if an ______ is off when the interface is active and the interface is correctly connected.
LED
A problem may be indicated if an LED is off when the interface is ______ and the interface is correctly connected.
active
If an interface is extremely busy, its ______ will always be on.
LED
The green ______ to the right of the AUX port will be on after the system initializes correctly.
OK LED
The green OK LED to the right of the ______ will be on after the system initializes correctly.
AUX port
The green OK LED to the ______ of the AUX port will be on after the system initializes correctly.
right
During the initial router bootup, the statement “NVRAM invalid, possibly due to write erase”, tells the user that this router has not been ______ yet or that the NVRAM has been erased.
configured
During the initial router bootup, the statement “NVRAM invalid, possibly due to write erase”, tells the user that this router has not been configured yet or that the ______ has been erased.
NVRAM
During the initial router bootup, the statement “NVRAM invalid, possibly due to write erase”, tells the user that this router has not been configured yet or that the NVRAM has been ______.
erased
The factory-default setting for the configuration register is ______, which indicates that the router should attempt to load a Cisco IOS image from flash memory.
0x2102
The factory-default setting for the configuration register is 0x2102, which indicates that the router should attempt to load a ______ from flash memory.
Cisco IOS image
The factory-default setting for the configuration register is 0x2102, which indicates that the router should attempt to load a Cisco IOS image from ______ memory.
flash
The factory-default setting for the configuration register is 0x2102, which indicates that the router should attempt to load a Cisco IOS image from ______.
flash memory
All Cisco routers include a ______ asynchronous serial console port.
TIA/EIA-232
All Cisco routers include a TIA/EIA-232 ______ serial console port.
asynchronous
All Cisco routers include a TIA/EIA-232 asynchronous serial ______ port.
console
True or False:
The console port supports hardware flow control.
false
A console terminal is an ASCII terminal or PC that runs ______ software such as HyperTerminal.
terminal-emulation
A ______ terminal is an ASCII terminal or PC that runs terminal-emulation software such as HyperTerminal.
console
Use an RJ-45 to RJ-45 ______ cable with a female RJ-45 to DB-9 adapter to connect a console terminal to a console port.
rollover
Use an RJ-45 to RJ-45 rollover cable with a female RJ-45 to ______ adapter to connect a console terminal to a console port.
DB-9
Use an RJ-45 to RJ-45 rollover cable with a female RJ-45 to DB-9 adapter to connect a ______ to a console port.
console terminal
Use an RJ-45 to RJ-45 rollover cable with a female RJ-45 to DB-9 adapter to connect a console terminal to a ______.
console port
Use an RJ-45 to ______ rollover cable with a female RJ-45 to DB-9 adapter to connect a console terminal to a console port.
RJ-45
To enter commands and configure a Cisco router, a user must log into the router to access the ______.
user interface
For security purposes, a Cisco router has ______ levels of access to commands
two
The Cisco router command access level whose typical tasks include commands that check the status of a router is ______ mode.
User EXEC mode
The Cisco router command access level whose typical tasks include commands that change the router configuration is ______ mode.
Privileged EXEC mode
The ______ mode prompt is displayed upon login to a router.
user EXEC
To enter privileged EXEC mode from user EXEC mode, type ______ at the > prompt.
enable
To enter ______ mode from user EXEC mode, type enable at the > prompt.
privileged EXEC
To enter privileged EXEC mode, type enable at the ______ prompt.
>
If a password has been set to enter privileged EXEC mode, enter it at the ______ prompt.
password:
The two commands that can be used to set a password for privileged EXEC mode are ______ and enable secret.
enable password
The two commands that can be used to set a password for privileged EXEC mode are ______ and ______.
enable password
enable secret
The two commands that can be used to set a password for privileged EXEC mode are enable password and ______.
enable secret
If both commands for setting a password for privileged EXEC mode are used, the ______ command takes precedence.
enable secret
When ______ mode has been entered, the prompt changes to a #.
privileged EXEC
When privileged EXEC mode has been entered, the prompt changes to a ______.
#
The global configuration mode can only be accessed from the ______ mode.
privileged EXEC
The following are the specific modes that can be accessed from the global configuration mode:

1. Interface
2. ______
3. Line
4. Router
5. Route-map
Subinterface
The following are the specific modes that can be accessed from the global configuration mode:

1. Interface
2. Subinterface
3. ______
4. Router
5. Route-map
Line
The following are the specific modes that can be accessed from the global configuration mode:

1. Interface
2. Subinterface
3. Line
4. ______
5. Route-map
Router
The following are the specific modes that can be accessed from the global configuration mode:

1. ______
2. Subinterface
3. Line
4. Router
5. Route-map
Interface
The following are the specific modes that can be accessed from the global configuration mode:

1. Interface
2. Subinterface
3. Line
4. Router
5. ______
Route-map
The following are the specific modes that can be accessed from the ______ mode:

1. Interface
2. Subinterface
3. Line
4. Router
5. Route-map
global configuration
To return to the user EXEC mode from the privileged EXEC mode, use the ______ command may be entered.
disable
Type ______ or end or press Ctrl-Z to return to privileged EXEC mode from global configuration mode.
exit
Type exit or ______ or press Ctrl-Z to return to privileged EXEC mode from global configuration mode.
end
Type exit or end or ______ to return to privileged EXEC mode from global configuration mode.
press Ctrl-Z
Type exit or end or press Ctrl-Z to return to ______ mode from global configuration mode.
privileged EXEC
Type exit or end or press Ctrl-Z to return to privileged EXEC mode from ______ mode.
global configuration
______ may also be used to return directly to the privileged EXEC mode from any sub-mode of global configuration.
Ctrl-Z
Ctrl-Z may also be used to return directly to the ______ mode from any sub-mode of global configuration.
privileged EXEC
Ctrl-Z may also be used to return directly to the privileged EXEC mode from any ______ of global configuration.
sub-mode
Ctrl-Z may also be used to return directly to the privileged EXEC mode from any sub-mode of ______.
global configuration
______ can be entered at the user EXEC or privileged EXEC mode prompt to display a list of available commands.
A question mark
?
A question mark, ?, can be entered at the ______ or privileged EXEC mode prompt to display a list of available commands.
user EXEC
A question mark, ?, can be entered at the user EXEC or ______ mode prompt to display a list of available commands.
privileged EXEC
A question mark, ?, can be entered at the user EXEC or privileged EXEC mode prompt to display ______.
a list of available commands
The ______ prompt indicates that there are multiple screens of output.
--More--
The --More-- prompt indicates that there are ______.
multiple screens of output
When a --More-- prompt appears, press the ______ to view the next available screen.
Spacebar
When a ______ prompt appears, press the Spacebar to view the next available screen.
--More--
When a --More-- prompt appears, press the Spacebar to view the ______.
next available screen
When a --More-- prompt appears, press the ______ to view just the next line.
Return or Enter key
When a --More-- prompt appears, press the Return or Enter key to view ______.
the next line
When a ______ prompt appears, press the Return or Enter key to view just the next line.
--More--
When a ______ prompt appears,press any key other than the Spacebar, or the Return/Enter key to return to the prompt of the mode in use.
--More--
When a --More-- prompt appears,press any key other than the ______ or the ______ to return to the prompt of the mode in use.
Spacebar
Return/Enter key
When a --More-- prompt appears,press any key other than the Spacebar, or the Return/Enter key to return to the ______.
prompt of the mode in use
To access privileged EXEC mode, type ______ or the abbreviation en or ena.
enable
To access ______ mode, type enable or the abbreviation en or ena.
privileged EXEC
To access privileged EXEC mode, type ______ or the abbreviations ______ or ______.
enable
en
ena
To access privileged EXEC mode, type enable or the abbreviation en or ______.
ena
The ______ and help response indicate an error and its placement shows where the possible problem is located.
caret symbol
(^)
Press ______ or the Up Arrow to repeat the previous command entry.
Ctrl-P
When the system indicates that additional information needs to be provided to complete the command, press Ctrl-P or the Up Arrow to repeat the previous command entry, then add a space and a ______ to reveal the additional arguments.
question mark
?
Typing an abbreviated command, such as sh, followed by the ______ key completes a partial command name.
Tab
Typing ______, followed by the Tab key completes a partial command name.
an abbreviated command such as sh
To disable ______ mode, type terminal no editing at the privileged EXEC mode prompt.
enhanced editing
To disable enhanced editing mode, type ______ at the privileged EXEC mode prompt.
terminal no editing
To disable enhanced editing mode, type terminal no editing at the ______ mode prompt.
privileged EXEC
In enhanced editing mode, to ______, press Ctrl-B or the Left Arrow key repeatedly until the beginning of the command entry is reached.
scroll back horizontally
In enhanced editing mode, to scroll back horizontally, press ______ or the Left Arrow key repeatedly until the beginning of the command entry is reached.
Ctrl-B
In enhanced editing mode, to scroll back horizontally, press Ctrl-B or the ______ key repeatedly until the beginning of the command entry is reached.
Left Arrow
In enhanced editing mode ______ will return a user directly to the beginning of the line.
Ctrl-A
In enhanced editing mode Ctrl-A will return a user directly to ______.
the beginning of the line
In ______ mode Ctrl-A will return a user directly to the beginning of the line.
enhanced editing
In enhanced editing mode when the command entry extends beyond one line, and the cursor then first reaches the end of the line, the line is shifted ten spaces to the ______ and redisplayed.
left
In enhanced editing mode when the command entry extends beyond one line, and the cursor then first reaches ______, the line is shifted ten spaces to the left and redisplayed.
the end of the line
In enhanced editing mode when the command entry extends beyond one line, and the cursor then first reaches the end of the line, the line is shifted ______ spaces to the left and redisplayed.
ten
In enhanced editing mode, the ______ indicates that the line has been scrolled to the left.
dollar sign
$
In enhanced editing mode, the dollar sign ($) indicates that the ______ has been scrolled to the left.
line
In enhanced editing mode, the dollar sign ($) indicates that the line has ______.
been scrolled to the left
In enhanced editing mode, the dollar sign ($) indicates that the line has been scrolled to the ______.
left
In ______ mode, the dollar sign ($) indicates that the line has been scrolled to the left.
enhanced editing
______ is a command used to back out of configuration mode and return the user to the privileged EXEC mode prompt.
Ctrl-Z
Ctrl-Z is a command used to back out of ______ and return the user to the privileged EXEC mode prompt.
configuration mode
Ctrl-Z is a command used to back out of configuration mode and return the user to the ______ prompt.
privileged EXEC mode
In enhanced editing mode, ______ moves back one word.
Esc-B
In enhanced editing mode, ______ moves to the end of the command line.
Ctrl-E
In enhanced editing mode, ______ moves forward one character.
Ctrl-F
right arrow
In enhanced editing mode, ______ moves forward one word.
Esc-F
The command history is enabled by default and the system records ______ command lines in its history buffer.
ten
To change the number of command lines the system records during a terminal session, use the ______ or the history size command.
terminal history size
To change the number of command lines the system records during a terminal session, use the terminal history size or the ______ command.
history size
The maximum number of commands for the command history's history buffer is ______.
256
To recall the most recent command in the history buffer, press ______ or the Up Arrow key.
Ctrl-P
To recall the most recent command in the history buffer, press Ctrl-P or ______.
the Up Arrow key
To return to a more recent command in the history buffer, press ______ or the Down Arrow key.
Ctrl-N
To return to a more recent command in the history buffer, press Ctrl-N or the ______ key.
Down Arrow
The router command interface employs ______ completion.
tab
The command to re-enable enhanced editing mode is ______.
terminal editing
To show the command history buffer, type ______.
show history
In enhanced editing mode, the ______ indicates that the line has been scrolled to the left.
dollar sign
$
In enhanced editing mode, the dollar sign ($) indicates that the ______ has been scrolled to the left.
line
In enhanced editing mode, the dollar sign ($) indicates that the line has ______.
been scrolled to the left
In enhanced editing mode, the dollar sign ($) indicates that the line has been scrolled to the ______.
left
In ______ mode, the dollar sign ($) indicates that the line has been scrolled to the left.
enhanced editing
______ is a command used to back out of configuration mode and return the user to the privileged EXEC mode prompt.
Ctrl-Z
Ctrl-Z is a command used to back out of ______ and return the user to the privileged EXEC mode prompt.
configuration mode
Ctrl-Z is a command used to back out of configuration mode and return the user to the ______ prompt.
privileged EXEC mode
In enhanced editing mode, ______ moves back one word.
Esc-B
In enhanced editing mode, ______ moves to the end of the command line.
Ctrl-E
In enhanced editing mode, ______ moves forward one character.
Ctrl-F
right arrow
In enhanced editing mode, ______ moves forward one word.
Esc-F
The command history is enabled by default and the system records ______ command lines in its history buffer.
ten
To change the number of command lines the system records during a terminal session, use the ______ or the history size command.
terminal history size
To change the number of command lines the system records during a terminal session, use the terminal history size or the ______ command.
history size