Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
45 Cards in this Set
- Front
- Back
Connect and allow communiction between two networks
|
Routers
|
|
determine best path for data to travel through connected networks
|
Routers
|
|
Software to run configuration files
|
IOS
|
|
These contain the instructions and parameters that control the flow of traffic in and out of the routers
|
configuration files
|
|
Stores routing tables
|
RAM
|
|
Holds ARP cache
|
RAM
|
|
Performs packet buffering as shared RAM
|
RAM
|
|
Maintains packet-hold queues
|
RAM
|
|
Provides temporary memory for configuration files of a router while the router is powered on.
|
RAM
|
|
Loses content when a router is powered down or restarted
|
RAM
|
|
Provides storage for the startup configuration files
|
NVRAM
|
|
Retains content when a router is powered down or restarted
|
NVRAM
|
|
Holds the IOS
|
Flash
|
|
Allows software to be updated w/o removing and replacing chips on the processor
|
Flash
|
|
Can store multiple versions of IOS software
|
Flash
|
|
is a type of electrically erasable programmable read-only memory (EEPROM)
|
Flash
|
|
Maintains instructions for power-on self test (POST) diagnostics
|
ROM
|
|
Stores bootstrap program and basic operating system
|
ROM
|
|
Requires replacing pluggable chips on motherboard for software upgrades
|
ROM
|
|
Connect routers to a network for packet entry and exit
|
Interfaces
|
|
Can be on motherboard or separate module
|
Interfaces
|
|
Why could you use a router in a LAN
|
to segment
|
|
Routers are mainly what kind of devices
|
WAN Devices
|
|
Routers have interfaces for both
|
LANs and WANs
|
|
What technologies are frequently used to connect routers?
|
WAN Technologies
|
|
Why do routers use WAN connections?
|
To communicate with each other
|
|
The backbobone devices of large intranets and the internet are?
|
Routers
|
|
What are the two main functions of a router
|
best path selection and switching of packets to the proper interface
|
|
Routing tables are maintained dynamically through the use of?
|
routing protocol that exchanges network topology information with other routers
|
|
consistent end-to-end addressing is porvided by
|
Correctly configured internetwork
|
|
Addresses that represent network topologies are provided by
|
Correctly configured internetwork
|
|
Best parh selection of a router is provided by
|
Correctly configured internetwork
|
|
A correctly configured internetwork porvides
|
Dynamic or static routing and switching.
|
|
Why would you use a router in a LAN
|
to segment
|
|
Routers are main what kind of devices
|
WAN Devices
|
|
Routers have interfaces for both
|
LANs and WANs
|
|
What technologies are frequently used to connect routers?
|
WAN Technologies
|
|
Why do routers use WAN connections?
|
To communicate with each other
|
|
The backbobone devices of large intranets and the internet are?
|
Routers
|
|
What are the two main functions of a router
|
best path selection and switching of packets to the proper interface
|
|
Routing tables are maintained dynamically through the use of?
|
routing protocol that exchanges network topology information with other routers
|
|
Consistent end-to-end addressing is porvided by
|
Correctly configured internetwork
|
|
Addresses that represent network topologies are provided by
|
Correctly configured internetwork
|
|
Best parh selection of a router is provided by
|
Correctly configured internetwork
|
|
A correctly configured internetwork porvides
|
Dynamic or static routing and switching.
|