Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
17 Cards in this Set
- Front
- Back
What happens to runt frames recieved by a cisco Ethernet switch |
The frame us dropped |
|
What are the two sizes of an Ethernet frames |
64 bytes 1518 bytes |
|
What statement best describes Ethernet |
It defines the most common lan type in the world |
|
Which two statements describe features and functions of the logical link control sublet in Ethernet standards |
Logical link control is implemented in software The data link layer uses Llc to communicate with the upper layers of the protocol suite |
|
Which statement describes a characteristic of mac address |
They must be globally unique |
|
Which statement is true about mac addresses |
The first three bytes are used by the vendor assigned oui |
|
Which destination address is used in a ARP request frame? |
FFFF.FFFF.FFFF |
|
What addressing information is recorded by a switch to build it's mac address table |
The source layer 2 address of incoming frames |
|
Which switching method uses the crc value in the frame |
Store and foward |
|
What is auto mdix |
A feature that detects Ethernet cable types |
|
When a device is sending data to another device on a remote network the Ethernet frame is sent to the mac address of the default gateway |
True |
|
The arp table on a switch maps which two types of address together |
Layer 3 address to a layer 2 address |
|
Which statement describes the treatment of arp requests on the local link |
They are recieved and processed by every device on the network |
|
What are the two potential problems that can result from arp operation |
On large networks with low bandwidth. Multiple arp broadcasts could cause communication delays Network attackers could manipulate mac address and ip address mapping in arp messages |
|
A collision fragment also known as a runt frame is a frame of fewer than 64 bytes in length |
Runt |
|
On a cisco switch port based memory buffering is used to buffer frames in queues linked to specific incoming and outgoing ports |
Port based |
|
Arp spoofing is a technique that is used to send fake arp messages to other hosts in the lan |
Spoofing |