• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/12

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

12 Cards in this Set

  • Front
  • Back
CMIP
Common management information protocol--->developed by the Telecommunications industry.
-used for monitoring and control of heterogeneous networks.
SNMPv2 how does it improve upon snmpv1?
-provides support for centralized and distributed network management startategies.
-Improved (SMI) structure of Management Information and security.
How does snmpv3 differ from v1&v2?
-solves security shortcomings.
=provides secure access to MIBs by authenicating and encrypting packets over the network.
SMI-
Secure Management Information-standards or protocol defines how SNMP information is structured.
MIB
management Information Base-object definitions are stored in MIBs.
NMS also called the "management entity".
Network Management System-is a combination of software and hardware used to monitor a network.
-
What are three types of SNMP messages issued by NMS?
GetRequest, GetNextRequest, SetRequest. The agent sends an Ack "GetResponse"message.
SNMPv2 improvement over v1
"GetBulkRequest" message type and the addition of 64-bit counters to the MIB. This allows multiple variables to be communicated instead of just one.
NMS is responsible for?
Soliting info from the agent..
commands to config the location and main contact of the Managed device
#snmp-server location [text]
#snmp-server contact [text]
RMON
Remote Monitoring or MIB-II. Can tell you statistics about the network as a whole while using standard SNMP protocol and functionality.
command to enable logging to NMS
(config)#logging on
to send to a syslog server host
(config)#logging [hostname | ip address]
to set logging severity level to [informational]
(config)#logging trap information