Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
Computed Tomography, or CT, has been commonly called_______________ or_________________ in the past.
|
Computerized Axial Tomography, CAT-Scan
|
|
Where are the instructional commands entered by the technologist?
|
The CT System Control
|
|
List five types of information/ instructions that are entered at the CT System Console.
|
1) Patient Information
2) Imaging Parameters 3) Post-Processing Technique 4) Filming 5) Archiving |
|
What CT System Component translates each command as it is entered into the systems machine language before passing it on to the Scan controller?
|
The Host Computer
|
|
What does the scan controller do?
|
It is responsible for the timing and operation of the table, gantry, and high voltage generator.
|
|
Which system Components operate using analog waveform?
|
The table, gantry, and high voltage generator.
|
|
What is another name for analog waveform
|
Continuous waveform
|
|
What CT System Component is responsible for converting the digital signal into an analog form?
|
The Digital-To-Analog Converter or DAC
|
|
What does DAC stand for?
|
Digital-To-Analog Converter
|
|
What are the two most notable components located in the gantry?
|
The xray tube and the detectors
|