• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/7

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

7 Cards in this Set

  • Front
  • Back
3 types of assembly drawings
Detailed
section
general
When are auxillary views used in a working drawing
When the object has an inclined surface that needs to be shown at its true size and shape
purpose for: 125 microinches,
16 microinches, 8 microinches
-mating surfaces of parts held together by bolts and rivets with no motion between them
-used where smothness is of primary importance
-used for such parts as surfaces of cylinders
What views are typically used to describe simple cylindrical parts?
side view and end view
What views are typically used to depict simple flat objects like gaskets and plates?
top view
What tool do you use when dimensioning an angled surface in an auxiliary view?
true
What are the two units of measure typically used to indicate surface roughness
Microiches
Micrometers