Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
43 Cards in this Set
- Front
- Back
To enlarge the screen grid so that it covers the drawing area: |
Enter the ZOOM command and type “a”. |
|
Which of the following is not open by default in the AutoCAD 2D Annotation Workspace? Status Bar Ribbon Command Line Menu Bar |
Menu Bar |
|
The F-keys provide switches for the features that may also be turned on and off using buttons on the: |
Status bar |
|
What is the function of the F2 key? |
Opens and closes the text window. |
|
Name the devices used to interact with the AutoCAD program? |
Mouse Keyboard Digitizer |
|
Which method changes the least between different versions of AutoCAD? |
Keyboard |
|
Which feature of AutoCAD will allow you to select precise points on the screen? |
Snap |
|
This type of coordinate is given in Length Angle, Z format: |
Polar coordinates |
|
Doing the following will not execute the LINE command? Typing "L" at the command prompt Selecting the Line tool from the Ribbon Clicking the Line button on the status bar Selecting Line from the Draw menu Clicking the Line button on the status bar |
Clicking the Line button on the status bar |
|
To repeat the LINE command: |
Press Enter at the command prompt Press the spacebar at the command prompt Press the right button on your mouse and then select "Repeat Line" |
|
"U" is an alias for: UNDO UNTRACK UCSICON None of the above |
None of the above |
|
Ortho serves a function that may also be served by: |
Polar Tracking |
|
To quit the AutoCAD 2011 program |
Select Exit from the File menu |
|
Which of the following commands can be used to initiate a connection to the Internet? |
BROWSER |
|
When drawing a line using polar coordinates, you need to know the line's _____ . |
length and angle |
|
If after entering the starting point for a line you type: @6,6 and hit Enter, you will draw a line that is at an angle of _____ degrees. |
45° |
|
You can end an active command by using the _____ . |
spacebar Enter key right-click shortcut menu |
|
To draw a line that is exactly 5 units long at an angle of 60°, you must use _____ coordinates. |
Polar |
|
In ____ mode, the numbers in the coordinate display change only when you select a point. |
Static |
|
The _____ button places a series of evenly spaced dots in the drawing area. |
Grid Display |
|
12.00,18.00 is an example of _____ coordinates. |
Absolute |
|
The left mouse button is known as the _____ button. |
Pick |
|
You can give a drawing a new name by using the _____ command. |
SAVEAS |
|
AutoCAD Classic, 2D Drafting and Annotation, and 3D Modeling are examples of _____ . |
Workspaces |
|
True or false? The file extension for a template drawing is .dwg. |
False |
|
True or false? You can repeat the previous command by pressing the spacebar. |
True |
|
True or false? When Ortho is on, you can only draw lines at angles of 45°, 90°, 135°, 180°, 225°, 270°, and 315°. |
False |
|
True or false? There is an Undo option within the Line command so you can undo the last segment drawn without leaving the command. |
True |
|
True or false? When entering commands at the command prompt, upper and lowercase letters are equivalent. |
True |
|
True or false? When erasing a line, it is easy to identify which line will be selected thanks to rollover highlighting. |
True |
|
True or false? You must have the Grid on for Snap to work. |
False |
|
True or false? It is best to type all commands from the keyboard. |
False |
|
True or false? The Clear Screen button erases all the lines in the drawing area. |
False |
|
True or false? The Application Menu contains the same set of tools available on the Ribbon. |
False |
|
When using the Erase command, the crosshairs are replaced with a __________. |
Pickbox |
|
A new drawing starts with a/an __________ drawing. |
Template |
|
Z is the alias for the __________ command. |
zoom |
|
If you accidentally start the wrong command, you can abort by using the __________ key. |
Esc |
|
When using dynamic input to draw a line, enter the length of the line followed by the __________ key to lock the length and enter the angle. |
Tab |
|
If you select Save from the File menu for a drawing that has not been previously saved, the __________ dialog box will open. |
Save Drawing As |
|
When selecting a menu item that is followed by an ellipsis (...) a __________ will open. |
Dialog box |
|
A general procedure for starting a new drawing is __________ or select the New tool from the Quick Access toolbar. |
+N> |
|
When drawing a line, the line that stretches from the starting point to the location of the crosshairs is called the __________. |
Rubber band |