Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
16 Cards in this Set
- Front
- Back
BULLETIN 90
|
DRIVER TRAINING AND Testing GUIDELINES
|
|
When trying to obtain the initial 140 at the training school how many attempts can be made in one day?
|
2 attempts
|
|
What are the minimum and maximum time limits on the driving course for all apparatus?
|
E, RS, Ambulance between 9 and 15 minutes Truck between 13 and 25 minutes
|
|
What is considered the most dangerous evolution on the driving course?
|
Serpentine
|
|
Who is the driver supervised by at all times while on the driving course?
|
Company officer or ACIC who is seated in the cab
|
|
What two things must be completed prior to a member participating in driver practice?
|
Read section 4 of bulletin 90 and view driver training video
|
|
Once the member has been signed off on the emergency response qualification to drive section of the 140. An appropriate entry shall be made on what and by whom?
|
Form 119 by the platoon commander
|
|
When drivers are performing alley dock right or left how many inches within the rear barrier must they be?
|
24
|
|
When performing parallel parking all right wheels must be within how many inches of curb?
|
18
|
|
When performing diminishing clearance how many inches must the front bumper within the finish line?
|
18
|
|
Is a member whose FD Form 140 only allows him to drive in a non-response mode allowed to drive a vehicle without supervision.
|
Yes – platoon commander is responsible for adequate instruction
|
|
When performing a tech test on driving course (designated paved areas) Who are the only personnel allowed on course?
|
Captain or A/Capt. Or regular Lt. of company. Test candidate and Test administrator
|
|
Where shall all initial instruction and driver training be conducted for all department personnel and under whose supervision?
|
Training Academy and under the supervision of DFC- TD or designee
|
|
What infractions can fail you from successfully completing driving course for Tech. exam?
|
Deviation from prescribed course route
2. Excessive speed or reckless Driving 3. Hitting a Cone 4. Failure to stop at any stop sign or designated Area 5. striking curb |
|
What must the driving instructor be wearing when instructing members for the tillerman position?
|
Class 1 life belt and Helmet
|
|
Repositioning of apparatus is allowed, such as backing up and pulling forward to avoid hitting an obstacle is permitted when on the course.
True or False |
True
Note: However, Altering the route or setup of the course is not allowed, resulting in failure. |