Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
8 Cards in this Set
- Front
- Back
components designed to provide measured amounts of opposition to current
|
resistors
|
|
-oldest and most common type
constructed of a rod of compressed graphite and a binding material |
carbon composition fixed resistor
|
|
-made by winding resistive wire on a porcelain base
-used to control large amounts of current -used when resistance accuracy is required |
wire-wound fixed
|
|
-made by despositing a thin layer of resistive material onto a high-grade ceramic tube or rod
-resistance is established by the resistance of the film |
film fixed
|
|
-developed in response to the demand for smaller electronic components
-no leads |
surface mount (SMT) fixed
|
|
-taps allow different value to be selected
-power must be removed to change taps -it then becomes a fixed value |
tapped
|
|
-used to control current
-sliding contact arm can be adjusted to vary the resistance, with power on -two connections |
variable (rheostat)
|
|
-used to control voltage
-sliding contact arm can be adjusted to vary the resistance, with power on -three connections |
variable (potentiometer)
|