Basic Military Requirements Navedtra 14325 Chapter 12

Front 1

The damage control organization is divided into how many parts?

Back 1

2

Front 2

What person coordinates the efforts of repair parties to control damage?

Back 2

the damage control assistant

Front 3

What are the duties of the administrative organization of damage control?

Back 3

records and schedules for maintenance/ written doctrine and procedures relating to damage control/ ship's bills

Front 4

What are the duties of the executive officer in regards to damage control

Back 4

ship's survivability training/ readiness to manage casualties/ control and recover from damage

Front 5

What officer is designated as the ship's damage control officer?

Back 5

the engineer officer

Front 6

The DCA is the primary assistant to the damage control officer. As such, the DCA has what responsibility?

Back 6

administration of the ship's DC organization

Front 7

What requirements must a petty officer have to be designated as the damage control petty officer (DCPO)?

Back 7

Complete the PQS

Front 8

Normally, the job of DCPO is held for what period of time?

Back 8

6 months

Front 9

What are the responsibilities of the DCPO?

Back 9

assist in the instruction of division personnel in damage control/ prepare and maintain damage control checkoff lists for their spaces/ make required reports

Front 10

What person is responsible for determining the safe entry of personnel into closed or poorly ventilated spaces?

Back 10

the gas free engineer

Front 11

What person is designated to aid the DCA train personnel and to prevent and fight fires?

Back 11

the fire marshal

Front 12

What action is taken if the fire marshal finds hazards that relate to poor housekeeping during a daily inspection?

Back 12

submit discrepancy report to DCA with copies to XO and department head

Front 13

The fire marshal has what responsibilities?

Back 13

submitting reports citing hazards and recommendations for their correction/ setting up a fire watch team before regular overhauls

Front 14

What is the purpose of the ship's damage control battle organization?

Back 14

to restore the ship to as near normal operation as possible

Front 15

In the damage control battle organization, what person is responsible for controlling damage; fighting fires; CBR countermeasures; and control of stability, list and trim?

Back 15

the DCA

Front 16

What are the primary damage control battle organization unit(s)

Back 16

repair parties

Front 17

What is the nerve center of the directing force for directing the damage control organization?

Back 17

DCC or CCS

Front 18

What repair party is in charge of main deck repair?

Back 18

repair 1

Front 19

What repair party is in charge of the propulsion repair?

Back 19

repair 3

Front 20

What repair party is in charge of electronic casualty control?

Back 20

repair 8

Front 21

Each repair party should be capable of performing what functions? (3)

Back 21

rigging casualty power/ controlling flooding/ extinguishing all types of fires

Front 22

When in port, the ship has what duty section components available to respond to any type of casualty?

Back 22

in port emergency teams

Front 23

The rescue and assistance detail must have what qualificaitons?

Back 23

Be qualified as an emergency team member and be qualified in first aid

Front 24

True or False. General Quarters is an all hands evolution-it is the highest state of readiness of the ship.

Back 24

True

Front 25

What is the correct GQ route to follow?

Back 25

Aft in the passageways and down ladders on the port side

Front 26

What system signals override microphone control stations to notify the ship's crew of imminent danger?

Back 26

general announcing system

Front 27

What type of communication system is X40J?

Back 27

emergency damage control communications system

Front 28

What alarm is sounded by the OOD or PreFly notifying ship's company of a pending or actual flight deck emergency?

Back 28

flight crash

Front 29

What alarm is sounded when there is a possibility that the ship will be struck by another waterborne unit?

Back 29

collision alarm

Front 30

When this alarm is sounded, all hands report to their preassigned stations and set material condition ZEBRA

Back 30

general alarm

Front 31

What means of communication is used when all other methods have failed?

Back 31

messengers

Front 32

All navy ships have how many material conditions of readiness?

Back 32

3

Front 33

What material condition provides the least degree of watertight integrity?

Back 33

XRAY

Front 34

What material condition sets the highest degree of watertight integrity?

Back 34

ZEBRA

Front 35

What fittings are closed when condition ZEBRA is set?

Back 35

DOG Z fittings, Circle X fittings, and Y fittings

Front 36

What means, if any is used by repair parties to find damage control fittings and closures in each compartment?

Back 36

Compartment checkoff lists

Front 37

The Damage Control Closure Log is maintained in what locations?

Back 37

DCC and Quarterdeck

Front 38

What log is a list of all DC-related fittings that don't work properly?

Back 38

Inoperative Fittings and Closures Log

Front 39

What fittings are secured when the ship is set for "darken ship"

Back 39

DOG ZEBRA

Front 40

The emergency escape breathing device (EEBD) supplies breathable air for what maximum period of time?

Back 40

15 minutes

Front 41

With training, you should be able to activate the EEBD within what maximum period of time?

Back 41

30 seconds

Front 42

What breathing device should NOT be worn for fire-fighting purposes?

Back 42

SEED

Front 43

What is the primary fire fighting tool for respiratory protection?

Back 43

OBA

Front 44

From the time it is activated, each cylinder used in the self-contained breathing apparatus (SCBA) will last approximately what length of time?

Back 44

30 minutes

Front 45

What substances must be present to start a fire?

Back 45

heat, oxygen, and fuel

Front 46

In the fire tetrahedron, how many components are neccessary for combustion?

Back 46

4

Front 47

Flammable materials give off vapors. What is the lowest temperature that these vapors burn when a spark is applied?

Back 47

flash point

Front 48

What term is used to describe the lowest temperature at which spontaneous combustion occurs?

Back 48

ignition point

Front 49

Heat from fire can be transferred by how many methods?

Back 49

three

Front 50

What method of heat transfer occurs when heat moves from one body to another by direct contact?

Back 50

conduction

Front 51

What method of heat transfer occurs through the motion of smoke, hot air, and heated gases?

Back 51

convection

Front 52

What type of heat transfer occurs when heat moves in all directions unless blocked?

Back 52

radiation

Front 53

What agents should be used to extinguish a class B fire?

Back 53

water or AFFF

Front 54

What agent should be used to extinguish class A or D fires?

Back 54

water