Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
55 Cards in this Set
- Front
- Back
List six types of ground tackle used aboard ships.
|
Ground tackle used on board ship includes—
a. Anchors b. Anchor cable and chains c. Chain stoppers d. Bending shackles e. Outboard swivel shots f. Detachable links |
|
Where are bower anchors located?
|
Bower anchors are carried on the bow of a ship and secured in the hawspipe.
|
|
List the standard parts of the mooring line used to secure a normal sized ship at a pier.
|
The standard mooring lines used to secure a normal-size ship at a pier include the—
a. Bowline b. Forward bow spring c. After bow spring d. Forward quarter spring e. After quarter spring f. Stern line |
|
Aboard ship, deck fittings are used for—
|
Aboard ship, deck fittings are used in securing mooring lines, in towing operations, and in securing heavy objects and equipment.
|
|
While anchored, what deck equipment is used to moor the ship’s boat?
|
Boat booms are used to moor the ship’s boat while anchored.
|
|
List two types of combatant craft.
|
Combatant craft include—
a. Mechanized landing craft (LCM) b. Utility landing craft (LCU) |
|
As a boat passenger, you should obey the orders of what person(s)?
|
As a passenger, you should obey all orders from the boat officer and the coxswain.
|
|
If a boat capsizes while you’re a passenger, you shouldn’t panic for what reason?
|
If a boat you’re a passenger in capsizes, you shouldn’t panic because fear is easily transmitted from one person to another.
|
|
What does the term athwartships mean?
|
The term athwartships refers to the position of something that is across the boat from side to side at a right angle.
|
|
List the three advantages of using nylon line over natural fiber line.
|
Three advantages of using nylon line over natural fiber line include—
a. Nylon line is 2 1/2 times stronger than natural fiber. b. Nylon has greater strength and elasticity. c. Nylon has greater resistance to weather. |
|
When a natural fiber line will bear on sharp edges or run over rough surfaces, what action should you take to protect the line from damage?
|
To protect a natural fiber line from sharp edges and rough surfaces, you should use a chafing gear between the contact point of the line and the damaging surface.
|
|
Under what condition should you use a wire rope?
|
You should use a wire rope when a great deal of wear and tear and weathering and heat is met, and greater strength is needed.
|
|
You are right-handed. When tying a bowline, the overhand loop should be in what direction?
|
The overhand loop should be turned in a counterclockwise direction.
|
|
You are going to join two separate lines together using a becket bend. What is the first step you should take?
|
The first step you should take when joining two separate lines together using a beck bend is to make a bight on one line and run the bitter end of the other line up through the bight.
|
|
What term describes general boat handling?
|
Boat Seamanship
|
|
What term describes the general work on the ship’s deck and the equipment used?
|
Deck Seamanship
|
|
What term describes anchoring, mooring, cargo handling, and towing seamanship?
|
Deck Seamanship
|
|
What term describes care and use of line?
|
Marlinespike Seamanship
|
|
It is important for you to know shipboard equipment terminology for which of the following reasons?
|
You will probably assist the deck force in various seamanship evolutions
|
|
What is ground tackle?
|
Equipment used to anchor and moor with anchors
|
|
Which is/are the most commonly used anchors aboard Navy ships?
|
A) Lightweight
B) Stockless |
|
How long is a standard shot of anchor chain?
|
15 fathoms
|
|
What device is used to secure shots of anchor chain together?
|
Detachable links
|
|
What types of anchor windlasses are used for lifting the ship’s anchor?
|
Vertical shaft and horizontal shaft types
|
|
What device engages the chain links when hauling anchors on board ship?
|
Wildcat
|
|
Which platform(s) is/are used in the construction of an accommodation ladder?
|
Middle and upper platforms
|
|
What is the Navy term for gangplank?
|
Brow
|
|
What lines are used to prevent the ship from drifting forward or aft?
|
The bowline and the forward spring lines
|
|
What means are used to protect the sides of a ship when it is alongside a pier?
|
Camels and fenders
|
|
What is the main purpose for deck fittings aboard ship?
|
To secure mooring lines
|
|
Which of the following is NOT a deck fitting found aboard ships?
|
Bollards
|
|
Which of the following is the purpose of boat booms when ships are at anchor or moored to a buoy?
|
To moor their boats well clear of the side
|
|
What is the Navy’s definition of a boat?
|
A non-commissioned waterborne vessel that isn’t designated as a service craft
|
|
When facing forward of the boat, your right-hand side is in this direction.
|
STARBOARD
|
|
What term describes the stern of the boat?
|
AFTER END
|
|
What term describes the area furthermost from the boat’s centerline.
|
OUTBOARD
|
|
When facing forward of the boat, your left-hand side is facing this direction.
|
PORT
|
|
What term describes the bow of the boat.
|
FORWARD END
|
|
Nylon line is about how many times stronger than manila line of the same size?
|
2 1/2
|
|
How is line termed small stuff identified?
|
By the number of strands in the line
|
|
Under safe working conditions, nylon line will stretch what maximum fraction of its length?
|
1/3
|
|
Nylon line will stretch what maximum percentage of its length before it will break?
|
50%
|
|
A wire rope designated as 5 by 12 has (a) what number of strands and (b) what number of wires per strand?
|
(a) 5 (b) 12
|
|
The most secure line whipping is made with which of the following pieces of equipment?
|
Small needle and palm
|
|
What type of knots are used to bend a line to or around an object.
|
HITCHES
|
|
The square knot is also known as a--
|
Reef knot
|
|
The bowline can be used for which of the following purposes?
|
A) To form an eye
B) To bend two lines together C) To secure a line to a pad eye |
|
TRUE or FALSE. The main value of the becket bend is that it can be used to bend together two lines of different sizes.
|
TRUE
|
|
If there is a great strain on a line, what type of bend should be used?
|
Double becket bend
|
|
What type of hitch will hold as long as there’s a strain on it?
|
Clove hitch
|
|
Which of the following actions would you perform to “coil down” a line?
|
Lay line in circles, one on top of the other
|
|
Which of the following actions would you take to “flemish down” a line?
|
Lay line in successive circles with the bitter end in the center
|
|
When making an eye splice, you should unlay what number of line strands?
|
8 to 10
|
|
Which of the following procedures is used to prevent the strands of synthetic line from frazzling after a splice has been made?
|
A) They are whipped
B) They are melted together C) They are cut off even with the standing part |
|
Which of the following is the purpose of using a short splice?
|
To form an eye
|