Super Mastercam X7 Design Review

Front 1

Define a fillet

Back 1

An arc tangent to two entities

Front 2

When trimming, a "solid entity between two points" represents what will be created.

Back 2

True

Front 3

The Dynamic Gnomon is an interactive item used in the graphics window to locate and align a set of axes.

Back 3

True

Front 4

Where do full circles start and end?

Back 4

3:00

Front 5

In the Xform Rotate function, what is zero position referenced to?

Back 5

Relative to horizontal in the active plane.

Front 6

Select the best answer for the following: What does the Work Offset # in the View Manager do.

Back 6

Assigns a work offset number to the associated view.

Front 7

How many selection points on an axis of the dynamic gnomon can redefine the axis vector?

Back 7

3 selection points

Front 8

Which of the following Trim function buttons is not mutually exclusive?

Back 8

Default

Front 9

In the Xform Rotate function, what is the zero position referenced to?

Back 9

At 3:00 in the current construction plane.

Front 10

How many selection points are along each axis of the dynamic gnomon?

Back 10

5 selection points

Front 11

Which of the following can be used to define a plane?

Back 11

2 lines, an arc, a flat surface, 3 points

Front 12

Arcs may not be created on an extended portion of the selected entity.

Back 12

False

Front 13

Polar Arcs are calculated in a clockwise direction

Back 13

False

Front 14

It is a good idea to copy system views when shifting the Zero to accommodate multiple setups on the CNC machine.

Back 14

True

Front 15

After using the Xform function, what are the original entities called?

Back 15

Group

Front 16

Press F9 to:

Back 16

Show/hide the coordinate axes and system origin

Front 17

When extruding a solid the direction is set by

Back 17

B and C

Front 18

To create a parallel line that is tangent to an arc, click the Tangent button in the Line Parallel ribbon bar, Select the reference line, and then choose the entity you want the parallel line to be tangent to

Back 18

True

Front 19

When you create entities dynamically, they are drawn with a white line. This is called the phantom state. When you click the final position to create the entity, the entity becomes:

Back 19

Live

Front 20

Setting a new active WCS, Cplane, and Tplane in the View Manager tells Mastercam to

Back 20

Map the axis to the desired plan as if rotating a part by hand

Front 21

Ina Top view and plane, vertical is parallel to which axis?

Back 21

Y axis

Front 22

When using the Autocursor to set a Delta Position?

Back 22

Hold shift and select a position

Front 23

To move between buttons and fields in ribbon bars, you can:

Back 23

All of the above

Front 24

In 2D mode, where is geometry created?

Back 24

Parallel to the current Cplane at the current system Z depth

Front 25

What is term that defines the Color, Line Style, Point Style, Level, Line Width, and Surface Density of an entity?

Back 25

Attributes

Front 26

A hidden entity will remain hidden when a file is saved and re-opened

Back 26

False

Front 27

You can create a full circle by entering 0 for the start angle and 360 for the end angle?

Back 27

True

Front 28

A locked Autocursor override remains in effect until you perform one of the following actions.

Back 28

All of the above

Front 29

All basic geometry can be created through the Sketcher toolbar.

Back 29

True

Front 30

Which is not a typical task of the View Manager?

Back 30

Changing the Gview

Front 31

Select the best answer to place copies around the selected center point using Solid Circular Pattern.

Back 31

All of the Above

Front 32

Selecting an arrowhead on the dynamic gnomon controls

Back 32

Align the axis

Front 33

In 3D mode, where is geometry created?

Back 33

At all of the geometry positions listed above

Front 34

After using Xform function, what are the new entities called?

Back 34

Result