Aviation Maintenance Ratings (Chapter 1)

Front 1

An important objective of the NAMP is to achieve and maintain maximum material readiness. What is an additional objective of the NAMP?

Back 1

Safety and conservation of material

Front 2

What is the purpose of the Aircraft Maintenance Department within an organization?

Back 2

Maintain assigned aircraft in a Full-Mission-Capable state in support of the units mission

Front 3

What are the major types of aircraft maintenance?

Back 3

Rework and upkeep

Front 4

Restorative work performed on an item of support equipment is considered what type of work

Back 4

Rework

Front 5

A comprehensive depot-level inspection of selected aircraft structures and materials and correction of any critical defects is what type of maintenance?

Back 5

Standard rework

Front 6

Maintenance performed on aircraft or equipment to improve its specific function is known as what type of maintenance?

Back 6

Special rework maintenance

Front 7

Preventive, restorative, or additive work performed on aircraft, equipment, and support equipment by an operating unit is what type of maintenance?

Back 7

upkeep

Front 8

scheduled work is performed on an aircraft as a result of its completing a prescribed number of flying hours. What type of maintenance is this?

Back 8

Standard upkeep

Front 9

The ability of an aircraft to perform its mission was changed by alteration without regard to flying hours. What type of maintenance is this?

Back 9

Special upkeep

Front 10

Aircraft maintenance is divided into what total number of maintenance levels?

Back 10

three

Front 11

Centralized local maintenance is performed by which of the following activities?

Back 11

AIMD

Front 12

Work performed by an operating unit on a day-to-day basis in support of its own operations is known as what type of maintenance?

Back 12

Organizational Level

Front 13

Servicing aircraft and preflight inspections are actions that are performed at what level of maintenance?

Back 13

Organizational

Front 14

Work performed in a centrally located facility within a geographical area is known as what type of maintenance?

Back 14

Intermediate level

Front 15

Work performed at an industrial-type facility is known as what type of maintenance?

Back 15

Depot level

Front 16

The Naval Aviation Maintenance Program is sponsored and directed by what command?

Back 16

CNO

Front 17

Material and technical support for the NAMP are provided by the cognizant systmes command and which other command?

Back 17

NAVSUP

Front 18

What type of relationship exists between a superior an a subordinate?

Back 18

line

Front 19

According to directives from higher authority, what officer directs the aircraft maintenance department?

Back 19

The aircraft maintenance officer

Front 20

The functional management responsibilities for the planning, control, and production of the aircraft maintenance department rest with which officer?

Back 20

Aircraft maintenance officer

Front 21

Which of the following officers ensures that staff divisions at the organizational level conform to established policies?

Back 21

The assistant aircraft maintenance officer

Front 22

Assuring that high quality maintenance work is performed is a function of what division in an organizational-level maint. department?

Back 22

Quality assurance

Front 23

Which of the following main. concepts allows you to regulate events rather than be regulated by them?

Back 23

prevention

Front 24

Within an organizational-level main. activity, what part of the activity monitors, controls, and applies the MDS?

Back 24

System administrator/analysis

Front 25

What officer is directly responsible for the overall production effort and material support of the organizational-level maint. department?

Back 25

the maintenance material control officer

Front 26

What branch or division is known as the nerve center of an organizational-level maintenance department?

Back 26

Maintenance control

Front 27

The power plants, airframes, and aviator's life support equipment branches belong to what division of an organizational-level maintenance department?

Back 27

Aircraft

Front 28

If you work in electronics, instruments, or armament, you are normally assigned to what division of an O-level maintenance department?

Back 28

Avionics/armament

Front 29

In an I-level maintenance activity, what is the central point of the maintenance effort?

Back 29

Production control

Front 30

Normally, the I-level organization has a total of how many production divisions?

Back 30

six

Front 31

What system provides O-level and I-level maintenance activities with a computer-based management information system?

Back 31

NALCOMIS

Front 32

Maintenance managers need current status information to control the maintenance effort. What system is designed to provide maintenance managers with this information?

Back 32

VIDS

Front 33

The VIDS boards in each work center are verified with the maintenance control VIDS board a minimum of how often?

Back 33

Once each day

Front 34

After the personnel in maintenance control complete the required blocks of a newly initiated VIDS/MAF, copies 1 and 5 are forwarded to?

Back 34

the work center

Front 35

If a check flight is required after the completion of a corrective action, notification must be given to what individual?

Back 35

The quality assurance division officer

Front 36

After a discrepancy has been corrected, what should be done with copies 1 and 5 of the VIDS/MAF?

Back 36

Copy 1 should be sent to maintenance control, and copy 5 is to be placed in the work center files.

Front 37

At the I-level of maintenance, what copies of the VIDS/MAF are forwarded to the work center upon component induction for repair?

Back 37

Copies 1, 4, and 5

Front 38

A component goes into an AWP status at I-level. What action is completed first with regard to the component?

Back 38

It is properly packaged and preserved.

Front 39

Information entered on MDS forms must always meet which of the following requirements?

Back 39

Be accurate and complete

Front 40

On-equipment maintenance actions are documented on ?

Back 40

NALCOMIS or a VIDS/MAF

Front 41

The portion of an inspection that involves the search for defects is known as what phase

Back 41

Look

Front 42

An organizational code, the Julian date, a sequence number, and a suffix are part of what code or control number?

Back 42

Job control number (JCN)

Front 43

Maintenance was performed on an item identified by a Work Unit Code. What type of code describes this action?

Back 43

Action Taken

Front 44

What type of code identifies a subassembly repair action that is completed separately from the major component repair action?

Back 44

JCN suffix

Front 45

What type of code identifies the system, specific engine, or component/part on which work is being performed?

Back 45

Work Unit Code

Front 46

What type of code describes the trouble or cause of trouble in a system or component?

Back 46

Malfunction Code

Front 47

What code is often referred to as the manufacturers code?

Back 47

CAGE

Front 48

An aircraft has 479 flight hours on it since new. You have just removed and replaced a damaged canopy. What entry should you place in the Time/Cycles block on the VIDS/MAF?

Back 48

A0479

Front 49

A technical directive status code consists of how many characters?

Back 49

ONe

Front 50

SE custody and maintenance history record, OPNAV 4790/51, is used for?

Back 50

Record custody and transfer info, provide rework and overhaul data, identify applicable and incorporated technical directives

Front 51

Of the following equipment, which one requires an OPNAV 4790/51 card?

Back 51

VAST stations

Front 52

ON initiation of each new OPNAV 4790/51, reporting custodians retain the latest processed copy from the permanent custodian. A current copy is also maintained with any accumulated data transcribed to it. (T/F)

Back 52

True

Front 53

What document provides scheduled control of the predictable maintenance workload?

Back 53

Monthly Maintenance Plan

Front 54

At the O-level what officer sets the format and arrangement of the monthly maintenance plan?

Back 54

The aircraft maintenance officer

Front 55

At the o-level the MMP is distributed by what day of the month prior to the month to which it applies?

Back 55

25th

Front 56

What information is included in the MMP?

Back 56

Current list of QARs, High-time components, schedule of technical training

Front 57

To increase technical knowledge levels and enhance and improve existing formal training through diagnostic testing procedures is the primary goal of which of the following programs

Back 57

MTIP