Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
75 Cards in this Set
- Front
- Back
When you are assigned to the line division, what person becomes your department head?
|
The aircraft maintenance officer
|
|
A troubleshooter must possess which of the following skills and/or knowledges?
|
Skill as a technical advisor to the plane captain and be knowledgeable in line operations and flight line safety
|
|
Normally, what percentage of the total personnel assigned to the line division are assigned to the plane captain branch?
|
Between 75 and 95 percent
|
|
What is the final step in becoming a qualified plane captain?
|
Be designated in writing by the commanding officer
|
|
Whenever a technician other than the plane captain performs portions of a daily/turnaround inspection on an aircraft, the plane captain is relieved of all responsibility for that aircraft.
|
False
|
|
Which of the following is a list of the qualities that a plane captain must possess?
|
Mechanical aptitude, personal integrity, and motivation
|
|
Smoking is not permitted within how many feet of an aircraft during fueling operations?
|
100 ft
|
|
Only approved explosion proof lights can be brought within what specified distance of the refueling operations?
|
50 ft
|
|
During fueling operations, a small amount of fuel is accidentally spilled. What action should be taken?
|
The spill should be contained and removed immediately.
|
|
A plane captain gets fuel in his eyes during fueling operations. What action should the plane captain take?
|
Flush his eyes with water, then get medical attention
|
|
How are aircraft wings and stabilizers marked in areas that should NOT be used as walkways?
|
They are marked "NO STEP"
|
|
An aircraft is being refueled by truck. What is the minimum distance from the truck that a radar set may be operated?
|
75 ft
|
|
A refueling crew consists of what minimum number of persons?
|
3
|
|
The type of fuel contained in the tank of a fuel truck is displayed across the side of the tank. What color and what size lettering is used on the tank
|
6-inch-high red lettering superimposed on 8-inch-high white reflective tape
|
|
What are the two types of systems used to fuel naval aircraft?
|
gravity and pressure
|
|
Which of the following is/are (an) advantage(s) of pressure fueling
|
fueling and defueling can be done from a single point, which gives the aircraft faster turnaround time
|
|
To find the fueling instructions for an aircraft, you shoud refer to what publication?
|
MIM
|
|
What is the last step you should take when fueling an aircraft?
|
Replace the safety cap on the aircraft receptacle.
|
|
What device or devices is/are used to drain residual fuel?
|
Fuel cell water drain valves
|
|
In some cases, engine oil is identified by a four-digit number. What does this number tell you about the oil?
|
Its use and viscosity
|
|
What is the viscosity rating of aircraft engine oil No. 2085?
|
85
|
|
What type of oil is used in most turbojet engines?
|
MIL-L-23699
|
|
Hydraulic fluid MIL-H-83282 is what color?
|
Red
|
|
You should use hydraulic fluid MIL-H-46170
|
When preserving hydraulic systems and components in naval aircraft.
|
|
A can of hydraulic fluid has been opened and partially use. When should this open can be disposed of?
|
Immediately
|
|
When an aircraft lacks a tire inflation chart plate, a plane captain should obtain tire inflation pressure data from what source?
|
The applicable MIM
|
|
An aircraft is land based and has a gross weight of 19,000 pounds. What is the proper tire pressure for this aircraft?
|
300 psi
|
|
What equipment should you always use when inflating aircraft tires?
|
A remote inflator unit
|
|
Which of the following is a safety precaution you should follow before you remove a wheel from an aircraft?
|
deflate the tire
|
|
What personnel have the responsibility for refilling liquid oxygen converters?
|
AMEs
|
|
Of the following parts of high-pressure air valve MS 28889-1 which one presents a FOD hazard and is normally removed?
|
the dust cover
|
|
A total of how many gas cylinders are carried on an air or nitrogen servicing trailer?
|
6
|
|
You need to determine the remaining amount of oil in the preoiler (PON-6) What device should you use.
|
A sight glass
|
|
What device should be used to catch the overflow oil when the preoiler (PON-6) is used?
|
A drain bottle assembly
|
|
What type of filtration system is used in an HSU-1 to make sure that clean hydraulic fluid is delivered to an aircraft system?
|
3-micron
|
|
What is the exact capacity of the reservoir on the HSU-1?
|
2 gallon
|
|
While an HSU-1 is not in use, what method is used to make sure that the hose end remains clean
|
It is connected to a fitting on the base of the HSU-1
|
|
In the Navy, you are responsible for your own safety as well as the safety of your shipmates.
|
True
|
|
What device should be used on or around jet intakes during ground maintenance turnup of jet aircraft?
|
Protective screens
|
|
After operation, personnel should not work on the exhaust section of a jet engine for what minimum period?
|
30 min
|
|
Personnel working around jet aircraft should take which of the following precautions to protect their hearing?
|
Wear the proper ear protection, complete work within exposure time limits, and have periodic checks on hearing ability
|
|
T/F Always consider an ejection seat system as loaded and armed, only authorized personnel may work on ejection seats, and ejection seats must be treated with the same respect as a loaded gun?
|
T
|
|
From what direction should personnel approach an overheated wheel?
|
From the fore or aft direction
|
|
What is the recommended procedure for cooling an overheated wheel?
|
Park the aircraft in an isolated area for 5 to 60 minutes
|
|
If operational necessity dictates that a wheel be cooled immediately, a plane captain should get supervision from personnel who are in what rating?
|
AM
|
|
If you have to handle liquid oxygen, you should wear what type of gloves?
|
loose fitting leather
|
|
You are handling liquid oxygen. Which of the following is a description of the way you should wear your clothing?
|
Wear cuffless trousers
|
|
Which of the following is a safety precaution that you should follow when working with liquid oxygen?
|
Do not carry matches in liquid oxygen handling areas, keep tools free from oil and grease, and do not permit smoking in liquid oxygen handling areas
|
|
Predeployment training lectures for personnel associated with the flight deck should include which of the following topics?
|
Flight deck and hangar deck safety precautions, tie-down requirements and techniques, and special shipboard maintenance procedures
|
|
T/F During the launching and recovery of aircraft, all personnel that are not required by such operations should stand clear of personnel involved in the launch and recovery operations.
|
True
|
|
Plane captains are required to wear what color helmets and what color flotation vests?
|
Brown and Brown
|
|
What person has the authority to approve aircraft jacking?
|
The aircraft handling officer.
|
|
Which of the following publications should you consult to find the details of special programs?
|
COMNAVAIRFORINST 4790.2
|
|
What causes the largest percentage of premature engine removals?
|
Foreign object damage
|
|
What are the major causes of FOD?
|
poor housekeeping, improper maintenance practices, and carelessness
|
|
The tool control program is based upon what concept?
|
Instant inventory
|
|
That is an outcome of the Tool Control Program?
|
Increased availability of proper tools for specific maintenance tasks
|
|
During a daily/turnaround inspection, a plane captain discovers a piece of hydraulic equipment is out of calibration. What action should the plane captain take?
|
Notify is or her supervisor immediately?
|
|
What form should you use when requesting oil analysis on an oil sample?
|
DD Form 2026
|
|
Detailed information concerning maintenance requirements and acceptable contamination levels of hydraulic fluid can be found in which publication?
|
NA 01-1a-17
|
|
Under normal conditions, at what interval will a plane captain take a fuel sample?
|
Before the first flight each day
|
|
An egress system checkout for personnel working on or around aircraft must be given by a qualified individual who is what rating?
|
AME
|
|
After the initial egress system checkout, maintenance personnel must receive an additional checkout a minimum of how often?
|
Every 6 months
|
|
Personnel removed from maintenance responsibilities for over what minimum period must receive a new egress system checkout?
|
90 days
|
|
What actions help prevent the improper use of SE?
|
Effective supervision and training of personnel
|
|
After the appropriate signatures have been obtained, an SE license is good for what maximum period?
|
3 years
|
|
What type of inspection is performed when an aircraft returns from SDLM?
|
acceptance
|
|
What type of inspection divides the total scheduled maintenance concept into small packages?
|
Phase
|
|
Why is wind direction an important consideration in fueling operations?
|
The wind may carry fuel vapors toward a source of ignition
|
|
Before beginning refueling operations, what is the first thing the refueling crew should do?
|
Identify the aviation fuel
|
|
The air pressure in aircraft tires must be checked how often?
|
daily
|
|
Any exposure, without ear protection, can cause hearing damage above what decibel (dB) level?
|
140 db
|
|
What color Helmet and flotation device for LSE
|
Brown vest red helmet
|
|
What manual outlines the hearing conservation program?
|
OPNAVINST 5100.23
|
|
What person manages the Support Equipment Training and Licensing Program?
|
the assistant aircraft maintenance officer.
|