Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
32 Cards in this Set
- Front
- Back
State the composition of the Project code.
|
Alpha/alpha/numeric.
|
|
What FAD is assigned to most fleet operating
activities? |
FAD II or III
|
|
Aircraft repair usage statistics are used by the
supply department for what purpose? |
Usage statistics justify stocking replenishment parts.
|
|
What are the two types of part numbers?
|
Definitive and nondefinitive.
|
|
What is the correct nomenclature for what is
commonly referred to as the "manufacturer’s code"? |
Commercial and Government Entity Code (CAGE).
|
|
What term is used for a part, component, or
system in which the requisitioned part is used? |
Next higher assembly.
|
|
What are the two primary technical manuals
used by the maintenance technician to order replacement parts? |
The illustrated parts breakdown (IPB) and the maintenance instruction
manual (MIM). |
|
What information is contained in the
"Introduction" of the IPB? |
General information and instructions for using the publication.
|
|
What part of the IPB contains information
concerning detailed parts that make up a component? |
The group assembly parts list.
|
|
In figure 3-3, what is the SW&R code for the
fitting, part number A51G10561-I3, item number 8? |
PAOZZ.
|
|
What position(s) of the SM&R code indicate(s)
the source from which you can acquire the item? |
The first position.
|
|
Which NAVSUP publication provides
cross-reference information from a reference number to its national stock number (NSN)? |
Master Cross-Reference List (MCRL).
|
|
What NAVSUP publication provides information
on exceptions to the one-for-one turn-in rule? |
Consolidated Remain in Place List (CRIPL).
|
|
How often is the ICRL-A revised?
|
Quarterly.
|
|
What is the purpose of the Aviation Consolidated
Allowance List (AVCAL)? |
AVCAL lists the items and quantities of aeronautical material authorized to
be stocked by and aircraft carrier to support the maintenance and operations of embarked aircraft. |
|
What are the first two-digits of the nine-digit
NIIN called? |
The National Codification Bureau (NCB) code.
|
|
What two instructions describe the procedures
for allowance and inventory of the AMMRL program? |
NAVAIRINST 13650. I for IMRL items and NAVAIRINST 13630. I for TOL
items. |
|
How is Naval Air Systems Command
(NAVAIRSYSCOM) involved in the AMMRL program? |
NAVAIRSYSCOM exercises overall program management and
authority. |
|
What are the major sections of the IMRL?
|
Employment data, change list, index, main body, and the activity inventory
record. |
|
What section of the IMRL lists all of the items
allowed for the activity along with allowance quantities? |
The IMRL main body.
|
|
How often is the IMRL Activity Inventory Record
reissued? |
It is reissued in its entirety each month.
|
|
What work center is the point-of-contact for
parts and material at the organizational maintenance level? |
Material control.
|
|
DD form 1348, Standard Form 44, and an
identiplate (DD 1896 or 1897) are all issued as part of what package? |
A flight packet.
|
|
What level of maintenance orders the greater
volume of parts? |
Intermediate level.
|
|
The Individual Component Repair List (ICRL) is
used by what work center to determine the repair capability of a component received by supply? |
Aeronautical material screening unit (AMSU).
|
|
What are the two sections of the Aviation Support
Division/Supply Support Center (ASD/SSC)? |
Supply Response Section (SRS) and Component Control Section (CCS).
|
|
If apart is listed in the CRIPL, the maintenance
activity has how many hours after receipt of the replacement component to furnish the unserviceable part? |
24 hours.
|
|
What items are maintained in the pre-expended
bins (PEBs)? |
High usage, low-cost, maintenance-related consumable materials that have
a minimum demand frequency of three per month. |
|
How often does supply review stock records for
the PEB? |
Quarterly.
|
|
What section of ASD/SSC manages local repair
cycle assets? |
Component control section (CCS).
|
|
How many workload priorities can be assigned
to a LRCA storage unit? |
Four.
|
|
If a squadron requisitions an NMCS component
from supply and, except for the turn-in, the only other part on station is in the IMA for repair, what priority will be assigned to the component received from the squadron? |
Priority 1, and the part would be designated "EXREP" or expeditious repair.
|