Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
27 Cards in this Set
- Front
- Back
|
Q1. The BRU-14/A bomb rack is installed in what
aircraft? |
A1. The BRU-14/A bomb rack is installed in the
P-3C aircraft. |
|
|
Q2. What bomb rack is used on the wing stations
of the P-3C aircraft? |
A2. The BRU-15/A bomb rack is used on the wing
stations of the P-3C aircraft. |
|
|
Q1. What is the maximum store capacity of the
BRU-11A/A bomb ejector rack? |
A1. The maximum store capacity of the
BRU-11A/A bomb ejector rack is 4,000 pounds. |
|
|
Q2. What does the auxiliary release unit provides
on a BRU-11A/A? |
A2. The auxiliary release unit provides an
emergency method of release should the ejector assembly or its electrical system fail. |
|
|
Q1. The BRU-32/A bomb ejector rack is installed
on the ________ aircraft. |
A1. The BRU-32/A bomb ejector rack is installed
on the F/A-18 aircraft |
|
|
Q2. What is the maximum capacity of the
BRU-33/A bomb ejector rack? |
A2. The maximum capacity of the BRU-33/A
bomb ejector rack is 2,000 pounds. |
|
|
Q3. How many individual ejector units can you
attach to the adapter assembly of the ITER? |
A3. You can attach three individual ejector units
to the adapter assembly of the ITER. |
|
|
Q4. How are IMER and ITER ejector units
numbered? |
A4. The IMER and ITER ejector units are
numbered according to the firing sequence. |
|
|
Q5. What is the purpose of the stores sensing
switch located on the forward hook of each station? |
A5. The stores sensing switch, located on the
forward hook of each station, signals the rack whether a weapon is loaded on a particular station or not. If the forward hook is closed, the switch signals the rack that the station is loaded, and will not automatically step to the next station. |
|
|
Q6. At what level is the custody of the IMER/ITER
hardware kit and practice bomb adapter kits maintained? |
A6. Custody of the IMER/ITER hardware kit and
practice bomb adapter kits is maintained at the organizational level. |
|
|
Q1. What impulse cartridge is installed in the
SUU-25F/A to launch flares? |
A1. The CUU-44 impulse cartridge is used to fire
flares from the SUU-25F/A. |
|
|
Q2. What voltage fires the impulse cartridge?
|
A2. 28 volts of dc fire the impulse cartridge.
|
|
|
Q3. When performing organizational-level maintenance
on the SUU-25F/A, you should look for what types of damage? |
A3. When performing organizational-level maintenance
on the SUU-25F/A, you should look for cracks or breaks in the aft retaining locks or suspension lugs, unburned pellets or obstructers in the breech sleeve, or frayed or broken breech leads. |
|
|
Q1. What chaff dispenser is installed in Navy
combat aircraft? |
A1. The AN/ALE-29A chaff dispenser is installed
in Navy combat aircraft? |
|
|
Q2. List the two major subassemblies of the AN/
ALE-29A countermeasure chaff dispensing set. |
A2. The two major subassemblies of the
AN/ALE-29A countermeasure chaff dispensing set are the glass-reinforced phenolic plastic block and a sandwich-type printed circuit board. |
|
|
Q3. What is the maximum capacity of the AN/
ALE-29A? |
A3. The maximum capacity of the AN/ALE-29A is
30 payload units. |
|
|
Q4. When the AN/ALE-37A is fully loaded, what
is its weight? |
A4. When the AN/ALE-37A is fully loaded, it
weighs 277 pounds. |
|
|
Q5. The AN/ALE-37A chaff dispenser contains
_______ modules |
A5. The AN/ALE-37A chaff dispenser contains
two modules. |
|
|
Q6. There are _______ chaff tubes contained in
an AN/ALE-37A chaff module. |
A6. There are 120 chaff tubes contained in each
module of the AN/ALE-37A. |
|
|
Aircraft bombs, torpedoes, mines, and other stores
are suspended________________ |
internally or externally from the aircraft
by bomb racks |
|
|
NAVAIR 11-10C-24
|
information about the
BRU-11A/A bomb ejector racks, refer to Bomb Ejector Rack BRU |
|
|
what suspension is The BRU-32/A bomb ejector rack?
|
14-inch suspension
|
|
|
The BRU-32/A bomb ejector rack has safety
interlock and automatic sway bracing. The safety interlock mechanically prevents the accidental opening of |
the suspension hooks
|
|
|
The
electronic control unit controls all the functions of the bomb rack and have the capability of releasing stores at what interval? |
35-millisecond intervals
|
|
|
Installation of the impulse cartridges
must be accomplished in? |
a designated RF
(radio frequency) free area. |
|
|
T or F
Never install or arm an ejector rack unless the safety pin(s) and flag(s) are in place |
T
|
|
|
Don't place any part of your body under stores
being loaded or unloaded if it is possible to accomplish the job without doing so. T or F |
T
|
