• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/121

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

121 Cards in this Set

  • Front
  • Back
As a technician, if you are to maintain complex weapons systems, where must you obtain the required information?
Technical publications.
What manual provides guidance on maintaining
technical manuals?
NAVAIR 00-25-100, Naval Air Systems Command, Technical Manual Program.
What are the two general styles of technical
manuals?
Military Specifications and commercial.
Technical manuals are divided into how many major types and what are they?
Two major types-operational and maintenance.
How are workpackage (WP) manuals divided?
By function and task.
What are the three primary elements for usability in a manual?
Visible lock-on format, logical arrangement structure, and quick understanding.
In a work package type manual, what is the information that appears in the upper right corner of each page?
The 7-digit WP number and the page within the work package.
What is the difference between a change and a revision of a technical manual?
A change issues correction pages for an existing technical manual, and a revision is the complete reissue of the entire technical manual with the
changes incorporated.
What reporting system allows fleet input to technical manual changes?
Technical publication deficiency reporting program.
What are the two types of publication changes?
Routine and Rapid Action Changes.
What is the purpose of the "A" page in a manual?
To help the user insert new pages and maintain a record of current pages.
Difference data sheets are used for what purpose?
To allow data to be added or changed without making a direct impact on existing information.
In a WP manual, where can you find information for all changed revised, added or deleted work packages?
The numerical index of effective work packages.
How are illustrations and tables added between existing items and how are they
numbered?
Capital letter suffixes are added to the number of the preceding illustration or table.
What is the function of the Rapid Action Change (RAC)?
To expedite the dissemination of urgent operation and maintenance change information.
How many numbering systems are currently in
use by NAVAIR and what are they?
Two. The NAVAIR (NA) numbering system and the newer Technical Manual
Identification Numbering System (TMlNS).
What part of the NAVAIR numbering system can the category of the publication be found?
Part I.
The standard TMINS number is made up of how many distinct parts and what are they?
Two. The publication identifier (PI) and the suffix.
The two-digit subject serial number is what group of the PI?
The third group.
What are the last six positions in the publication identifier (PI) called?
The technical manual (TM) identifier.
In the NAVAIR publication number NA 01-75PAA-2-4, what does the number "2"
designate?
That this publication is a maintenance instruction manual.
How are quality assurance inspection requirements identified in maintenance
instruction manuals (MIM)?
In most cases the QA required inspections are shown in italics; in some cases
those requirements are underlined.
What technical publication is most helpful in identifying and ordering replacement parts?
Illustrated Parts Breakdown (IPB).
The Naval Aeronautic Publications Index (NAPI) has how many sections?
Six.
Where are all NAVAIR aeronautical publications changes, technical directives, and forms cataloged?
Naval Aeronautical Publication Index (NAPI).
What division maintains a complete Naval Aeronautic Publications Index (NAPI) in its
library?
Quality assurance division.
What is the purpose of the “Technical Documentation List”?
To provide information concerning the availability and applicability of technical manuals for maintenance of a particular aircraft model.
What information does the NATOPS Flight Manual contain?
Complete operating instructions for a specific aircraft and its operational
equipment.
What type of manual describes how to “fight” an
aircraft?
Tactical manual.
Which manuals prevent the need for duplication of standard practices in other manuals?
General engineering series manuals (01-1A).
What does the “-3” in the publication number
01-75PR4-3-1 indicate?
Part III is the “type manual. “A “-3” in this position indicates a structural
repair manual.
Aeronautical component and equipment manuals, 03 series, cover information on what
type of equipment?
Accessories.
MRCs, PMCs, and SSCs provide a basis for planning, scheduling, and complying with scheduled maintenance requirements under what system?
Planned Maintenance System (PMS).
Periodic Maintenance Information Cards (PMICs) identify what information?
Scheduled or forced removal items and their replacement intervals.
What are the only documents authorized for operational or maintenance performance on naval aircraft and related equipment?
Technical manuals or publications issued through the NAVAIR distribution
system.
What is the purpose of the Naval Aviation Safety
Program, OPNAVINST 3750.6?
To preserve human and material resources,
What safety-related publication provides
guidance on the administration of the NAVOSH program Navywide?
Navy Occupational Safety and Health (NAVOSH) Program, OPNAVINST 5100.23.
What information is contained in OPNAVINST 5100.19?
Safety precautions applicable to forces afloat.
What is the purpose of the manual NAVAIROSH
Requirements for the Shore Establishment,
NAVAIR A1-NAOSH-SAF-00/P5100-I?
To provide guidance on acceptable workplace safety and health standards
ashore within the Naval Air Systems Command.
What is the purpose of the Technical Directive System?
It controls and issues all technical directives.
What are the two styles of Technical Directives (TDs)?
Formal TDs (letter) and interim TDs (message).
What are the four types of instructions to be distributed under the Technical Directive
System?
Change, interim change, bulletin, and rapid action minor engineering change (RAMEC).
A technical directive issued by message or message format letter that dictates urgent dissemination is known as what type of change?
Interim change.
An interim document that directs a onetime inspection to determine if a given condition exists is known as what type of technical directive?
A bulletin.
What is a rapid action minor engineering change (RAMEC)?
A message TD, which provides for quick action on minor changes that offer significant advantages to the operating forces.
What are the two methods of updating a technical directive?
An amendment and a revision.
Define a rescission.
The process by which TDs are removed from active files after requirements have been incorporated.
How long should an activity maintain a TD on file?
Until it is deleted from the NAVSUP 2002 index.
How are TDs cancelled?
By an amendment to the TD.
What activity assigns the numbers for changes
and bulletins?
The Technical Directive Control Center at the Naval Air Technical Services
Facility.
When an uncorrected, unsafe condition exists that could result in serious injury to personnel or damage or destruction of property, what
category of TD is issued?
Immediate action TD.
What category of technical directive is issued to
complete an action that, if uncorrected, could constitute a hazard through prolonged use?
Routine action TD.
What category of TD is used to confirm that a modification has been completely incorporated by the contractor or in-house activity in all
accepted equipment?
Record purpose.
What division has overall management responsibility for the technical library?
The quality assurance division.
In an activity with more than one publications library, who is responsible for determining the
activity's publication needs?
The central technical publications library (CTPL).
When a central library has other technical libraries within the command, these libraries are known as what type of libraries?
Dispersed technical publications libraries (DTPL).
What list includes publications and directives of a general nature that have no application to a specific weapons system?
General Aeronautical Publications List.
What list includes publications and directives that apply to a specific weapons system or
equipment?
The Aeronautical Publication by Weapons System List.
What is the purpose of the central technical publications library stamp?
The stamp identifies and numbers all controlled publications.
What form does the CTPL use to ensure that changes and revisions to publications are
incorporated in a timely manner when issued to
a dispersed library?
The Change Entry Certification Record (CECR).
How long are part 2 copies of the CECR maintained by the central librarian?
Until completion of the next quarterly audit.
To ensure their publications are current and in good material condition, the central library audits dispersed libraries at least how often?
Quarterly.
What report is used to improve the quality and accuracy of technical publications?
Technical Publications Deficiency Report (TPDR).
What manual provides format and content of the information required in a technical publications deficiency report?
Naval Aviation Maintenance Program, OPNAVINST 4790.2.
What is the primary purpose of technical publications?

1. To train nonmaintenance personnel
2. To replace technical training
requirements
3. To help you perform your assigned maintenance
4. To support logistics
3. To help you perform your assigned maintenance
For a description of the NAVAIR technical
manual program, you should refer to what publication?

1. NAVSUP 2002
2. NAVAIR 00-25-100
3. NAVAIR 00-500A
4. NAVAIR 00-500B
2. NAVAIR 00-25-100
What are the two major types of technical manuals?

1. Operational and maintenance
2. Conventional and work package (WP)
3. Organizational and intermediate
4. Commercial and conventional
1. Operational and maintenance
Which of the following format styles can be found in technical manuals?

1. Conventional and work package (WP)
2. Commercial and conventional
3. Simple and complex
4. Organizational and intermediate
1. Conventional and work package (WP)
The format of a publication should be designed to improve which of the following key aspects?

1. Readability
2. Reproduction of pages
3. Replacement of page changes
4. Usability
4. Usability
Each work package of a work package type of manual contains all information required to perform a specific task on an aircraft system.

1. True
2. False
1. True
Where does the WP identification number
appear on a page in a WP manual?

1. Top center
2. Top left comer
3. Top right comer
4. Bottom center
3. Top right comer
A WP number consists of what total number of digits?

1. 12
2. 10
3. 8
4. 5
4. 5
Technical manuals are updated by what means?

1. Changes and revisions
2. Notices
3. RACs
4. Difference data sheets
1. Changes and revisions
What technical publication update method involves the complete reissue of a
replacement manual with all change information incorporated?

1. RAC
2. Revision
3. Notice
4. Change
2. Revision
Technical Publication Deficiency Reports
(TPDRs) usually result from fleet inputs that include changes for which of the following reasons?

1. To correct user-detected errors
2. To improve verbiage
3. To incorporate a “better way”
4. Each of the above
4. Each of the above
Which of the following numbers indicates a
illustration has been added to a maintenance manual because of an issued change?

1. 2-1B
2. 2-1.1
3. 2-Bl
4. 2.1-1
1. 2-1B
Which of the following occurrences in a manual does NOT require an associated
change symbol?

1. Blank spaces resulting from the deletion of text material
2. Relocation of material that changes procedures of an inspection
3. Incorporation of a part on an
illustration
4. New material on an added page
1. Blank spaces resulting from the deletion of text material
What method is used to incorporate a minor design change to equipment without making a direct impact on the existing infomation contained in a manual?

1. Revision
2. Change
3. Difference data sheet
4. Rapid action change
3. Difference data sheet
In a WP manual, what information is contained in the numerical index of effective WPs?

1. All changed pages only
2. All deleted WPs only
3. All revised WPs only
4. All changed, revised, added, or deleted WPs
4. All changed, revised, added, or deleted WPs
A change symbol in a WP manual is required for changes to which of the
following elements?

1. IPB illustrations
2. Diagrams only
3. Line drawings only
4. Diagrams, line drawings, and illustrations
4. Diagrams, line drawings, and illustrations
A NAVAlR manual number consists of what parts?

1. A letter prefix and one additional part
2. A numerical prefix and two additional parts
3. A letter prefix and three additional parts
4. A numerical prefix and four additional parts
3. A letter prefix and three additional parts
What is identified by part I of the publication number?
1. The general subject classification
2. The type of manual
3. The category of manual
4. The group of manual
3. The category of manual
What portion of NAVAIR publication number NAVAIR 01-75PAC-1 specifies
the type aircraft and the manufacturer of the aircraft to which the publication applies?

1. 01-75 only
2. 75PAC only
3. 01-75PAC
4. PAC-1
2. 75PAC only
What portion of NAVAIR publication number NAVAIR 0l-85AD-1 signifies the
publication is a NATOPS manual?

1. 01
2. -85AD
3. -1
4. AD-l
3. -1
The purpose of the TMINS is to meet the requirements of all systems commands to
obtain what standardized information concerning technical manuals and changes?

1. Identification only
2. Referencing only
3. Requisitioning only
4. Identification, referencing, and requisitioning
4. Identification, referencing, and requisitioning
TMINS numbers for manuals are patterned after what numbering system?

1. National Stock Number System
2. Subject Serial Number
3. Standard Subject Classification Code
4. Unit Identification System
1. National Stock Number System
The publication identifier (PI) is the root of the TMINS number. It contains a total of
how many characters?

1. 13
2. 12
3. 11
4. 10
1. 13
What information is identified by the first seven characters of the PI?

1. The technical manual
2. The Standard Subject Classification code
3. The subject serial number
4. The hardware or subject identifier
4. The hardware or subject identifier
What information is identified by the first letter in the PI?

1. The subject serial number
2. The responsible command
3. The type of manual
4. The Standard Subject Classification code
2. The responsible command
What information is identified by the second group of characters in the PI?

1. The subject serial number
2. The responsible command
3. The type of manual
4. The Standard Subject Classification code
4. The Standard Subject Classification code
What information is identified by the third group of characters in the PI?

1. The subject serial number
2. The responsible command
3. The type of manual
4. The Standard Subject Classification code
1. The subject serial number
The first group of characters in the technical manual identifier consists of three letters or numbers. This group is known as the TM

1. issue
2. identifier
3. serial number
4. acronym
4. acronym
The third group of characters in the technical manual identifier consists of a
single number or letter. It is known as the TM

1. issue
2. identifier
3. serial number
4. acronym
1. issue
TIMINS identifies classified publications by what means?

1. Total PI composition
2. The PI prefix
3. The PI subject serial number
4 . The PI suffix
4 . The PI suffix
What manual gives a comprehensive explanation of the TMINS?

1. NAVAIR 00-500AV
2. NAVAIR 00-500B
3. M0000-00/TMINS
4. N0000-00-IDX-000/TMS
4. N0000-00-IDX-000/TMS
Which section of the MIM covers component repair procedures for intermediate-level maintenance?

1. Section I
2. Section II
3. Section III
4. Section IV
4. Section IV
In which callout of figure 2-18 is information found on specific tools other than standard items to perform
maintenance?

1. Callout A
2. Callout B
3. Callout C
4. Callout D
3. Callout C
For which of the following reasons are sections of MIMs now issued as separate
publications under individual identifying numbers?

1. Less expensive to produce
2. Easier to use only
3. Easier procurement, storage, filing, and use
4. Easier replacement
3. Easier procurement, storage, filing, and use
A listing of weapons systems component parts keyed to illustrations is provided in
what type of manual?

1. Maintenance Instruction Manual
2. Structural Repair Manual
3. Illustrated Parts Breakdown manual
4. Aircraft Maintenance Manual
3. Illustrated Parts Breakdown manual
All aeronautical publications, changes, technical directives, and forms issued by
NAVAIRSYSCOM are cataloged in the Naval Aeronautic Publications Index
(NAPI).

1. True
2. False
1. True
The Naval Aeronautic Publications Index
(NAPI) consists of how many sections?

1. Six
2. Two
3. Eight
4. Four
1. Six
What aircraft maintenance division normally maintains a complete NAPI?

1. Maintenance material control
2. Administration
3. Quality assurance
4. Armament
3. Quality assurance
For more in depth information concerning the NAPI, you should refer to which of the following publications?

1. NAVAIR 00-25-100
2. NAVAIR 00-80T-96
3. NAVAIR 01-1A-540
4. NAVAIR 0l -85ADC-1
1. NAVAIR 00-25-100
What series of manuals covers standard aviation maintenance practices that apply to all aircraft?

1. -1
2. 01-1A
3. 01-1B
4. -8
2. 01-1A
Large, high-density avionics aircraft with computer-controlled, integrated weapons
systems use what type of manual to aid the aircrew in maintaining large analysis and
single flow data?

1. Structural repair manual
2. Support equipment manual
3. NATOPS manuals
4. Crew station manuals
4. Crew station manuals
Large, high-density avionics aircraft with computer-controlled, integrated weapons
systems use what type of manual to help the
aircrew troubleshoot and repair equipment to maintain mission capability while still
airborne?

1. Structural repair manual
2. Support equipment manual
3. NATOPS manuals
4. In-flight maintenance manual
4. In-flight maintenance manual
What NAVAIR manual contains basic structural repair data common to all aircraft?

1. NAVAIR 00-25-100
2. NAVAIR 01-1A-1
3. NAVAIR 01-1A-540
4. NAVAIR 01-85ADC-1
2. NAVAIR 01-1A-1
When you see a publication numbered NAVAIR XX-XXX-4, you know that this manual is of what type?

1. Maintenance Instruction Manual
2. Illustrated Parts Breakdown
3. Structural Repair Manual
4. Work Unit Code Manual
2. Illustrated Parts Breakdown
The Planned Maintenance System publications consist of what type or types of cards or charts?

1. MRCs only
2. PMICs only
3. SCCs only
4. MRCs, PMICs, and SSCs
4. MRCs, PMICs, and SSCs
What PMS publication provides information in an abbreviated walkaround
order to aid personnel when they inspect aircraft surfaces?

1. Turnaround checklist
2. Daily MRC
3. Phase maintenance requirements cards
4. Periodic maintenance information
Cards
1. Turnaround checklist
What safety publication contains information and guidelines on acceptable
work place safety and health standards ashore?

1. OPNAVINST 3750.6
2. OPNAVINST 5100.23
3. NAVAIR A1-NAOSH-SAF-
000/P5100-1
4. NAVAIR 00-25-100
3. NAVAIR A1-NAOSH-SAF-
000/P5100-1
A technical directive change directs the accomplishment and recording of a material
change, a repositioning, a modification, or an alteration in the characteristics of the
equipment to which it applies.

1. True
2. False
1. True
A technical directive that is issued to clarify, add to, delete from, make a minor
requirement change, or cancel an existing technical directive is known as what type of
technical directive?

1. Bulletin
2. Change
3. Revision
4. Amendment
4. Amendment
Which of the following symbols designates
the second revision to a TD?

1. Rev. 1
2. Rev. 2
3. Rev. A
4. Rev. B
4. Rev. B
A technical directive is issued to correct a safety condition that could result in fatal or
serious injury to personnel. What type of technical directive is this?

1. Routine
2. Immediate action
3. Urgent
4. Record purpose
2. Immediate action
The overall management of the technical library is a function of what activity or individual?

1. Quality assurance division
2. Commanding officer
3. Central library supervisor
4. Material control division
1. Quality assurance division
What form does the dispersed librarian sign to indicate the receipt of a publication
change from the central library?

1. DD Form 1348
2. NWPL (OPNAV Form 5070/11)
3. CECR (OPNAV Form 5070/12)
4. OPNAV Form 4790/66
3. CECR (OPNAV Form 5070/12)
Routine deficiencies in technical publications are reported via OPNAV Form
4790/66 to what command or commands?

1. CNO
2. NATSF only
3. CFA only
4. NATSF and CFA
4. NATSF and CFA
When an activity with a central library has
other libraries within the command, dispersed technical publications libraries
(DTPLs), what organizational element of the activity manages these libraries?

1. The CTPL
2 . QA
3. Admin
4. Material control
1. The CTPL
At least how often does QA audit the CTPL?

1. Monthly
2. Quarterly
3. Biannually
4. Annually
4. Annually
Information about discrepancies or change
recommendations of a routine nature on the technical content of a NATOPS should be submitted on what form?

1. OPNAV Form 4790/66
2. OPNAV Form 4790/12
3. OPNAV Form 5300/32
4. OPNAV Form 3500/22
4. OPNAV Form 3500/22