• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

A key: Read text to speech.a key

image

Play button

image

Play button

image

Progress

1/7

Click to flip

7 Cards in this Set

  • Front
  • Back
SYS pb
(GPWS panel)

- OFF
- FAULT Light
OFF:
All basic GPWS alerts (Mode 1 to 5) are inhibited.

FAULT LT:
This amber light comes on, along with an ECAM caution, if the basic GPWS mode 1 to 5 malfunction.
G/S MODE pb
(GPWS panel)

- OFF
OFF:
Glideslope mode (mode 5) is inhibited.
FLAP MODE pb
(GPWS panel)

- OFF
OFF:
Flap mode (“TOO LOW FLAPS” mode 4) is inhibited. (To avoid nuisance warning in case of landing with flaps setting reduced).
LDG FLAP 3 pb
(GPWS panel)

- OFF
ON:
Flap mode is inhibited when FLAPS CONF 3 is selected (to avoid nuisance warning in case of landing in CONF 3). In this case, LDG MEMO displays FLAPS ... 3 instead of “CONF... FULL.”
TERR pb
(GPWS panel)

- OFF
- FAULT Light
OFF:
Inhibits the Terrain Awareness Display (TAD) and Terrain Clearance Floor (TCF) modes. Does not affect basic modes.

If OFF is selected the ECAM caution NAV GPWS TERR DET FAULT is displayed.

FAULT LT:
TAD or TCF mode fails. The terrain is not shown on the ND. The basic GPWS mode 1 to 5 are still operative if the SYS pb OFF or FAULT lights are not illuminated.
PULL UP - GPWS pb
(Instrument panel)

- PULL UP Light
- GPWS Light
PULL UP:
Comes on red + specific voice alert when the second boundary of Mode 1 is penetrated, or when Mode 2, or any TAD or TCF alert is activated.

GPWS:
Comes on amber + specific voice warning when any other mode is activated.
TERR ON ND pb
(Instrument panel)

- ON
- OFF
ON:
The terrain is displayed on the ND, if the:
- TERR pb is selected ON, and
- TERR FAULT light is not on.
The ON light comes on.

OFF:
The terrain data is not displayed on the ND.