• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

A key: Read text to speech.a key

image

Play button

image

Play button

image

Progress

1/40

Click to flip

40 Cards in this Set

  • Front
  • Back
683. An authorization for a pilot to conduct flight at any altitude from the minimum IFR altitude up to and including the altitude specified in the clearance is a/an ________ Clearance.
cruise
682. The type of clearance that provides for intermediate stops while en route is a/an ________ Clearance.
through
681. The term “ATC” should be included in clearances relayed through a/an
dispatcher
680. The first three items in an ATC departure clearance are aircraft identification
clearance limit, and departure procedure
679. A controller shall use the prefix phrases “ATC CLEARS,” “ATC ADVISES,” or “ATC REQUESTS” at the time that a clearance, advisory, or request is relayed
through a non-ATC facility
678. The pilot-in-command of an aircraft shall comply with all provisions of an ATC clearance unless an amended clearance has been obtained or
an emergency exists
677. The purpose of an ATC clearance is to
prevent collision between known aircraft
676. Which item is always included in a clearance?
Aircraft identification
675
675
674. The pilot-in-command of an aircraft may NOT deviate from a clearance unless an amendment has been obtained or
an emergency exists
673. What prefix phrase should you use to relay a clearance to an aircraft through another aircraft?
“ATC CLEARS.”
672. Use authorized symbols or abbreviations for recording ________, ________, and ________.
clearance, reports, and instructions.
671. Compared to Terminal or En Route strips, Flight Service strips are ________ yet have ________ blocks
larger, fewer
670. The Flight Service option has ________ designations for their strips
two
669. Compared to the Terminal strip, the En Route strip is ________ and has 12 more ________.
larger, blocks
668. In any option, strips are produced on either special ________ or they are ________.
printers, handwritten
667. Flight progress strips are used for
posting current data on air traffic
666. When stripmarking, do NOT draw a horizontal line through
an altitude until the aircraft has reported leaving the altitude.
665. Which control symbol indicates that flight information has been forwarded?
B and C
664. What symbol should be used to delete any unwanted or unused altitude information
X
663. What is the symbol to indicate that an aircraft’s clearance is void if NOT airborne by a specific time?
v<
662. The letters ‘OTP’ on a strip stand for
VFR conditions-on-top
661. What needs to be added to the letter ‘S’ when hand printed
A horizontal line below the
660. Which block is used to record the aircraft I.D. on a Flight Service strip?
1
659. What information is found in Block 5 of the En Route strip
Filed true airspeed
658. In which block can the aircraft I.D. be found on an En Route strip
3
657. On a Terminal overflight strip, altitude and route of flight can be found in which block
9
656. For the Terminal departure strip, Block 7 is used for what?
Requested altitude
655. The proposed departure time on a Terminal departure strip can be found in which block?
6
654. In which block would you find the destination airport on a Terminal arrival strip
9A
653. For Terminal arrival strips, altitude information is found in which block
9
652. On all Terminal strips, Block 5 is used for what purpose?
Beacon code
651. Which of the items listed below is NOT one of the three designations for a Terminal strip?
Preflight
648. When you have run out of writing space on a strip for a particular flight, you should
use additional strips to record information and consider all strips as one
647. For an En Route Strip, in which block does the aircraft type appear?
?
646. In comparison to the Terminal strip, the En Route strip is
larger with more blocks
645. The Terminal strip has three different uses including
Departure, Arrival, and Overflight
644. Strips are ________ and ________ differently for each air traffic option.
sized and formatted
644. Strips are ________ and ________ differently for each air traffic option
?
642. To delete any unused or unwanted symbols or items a/an ________ or ________ should be used.
X; ---